Shenzhen Weier Technology WR030 Bluetooth Keyboard User Guide

Wireless Keyboard
User Guide

PACKAGE CONTENTS

1. Wireless Keyboard
2. Micro-USB charging cable
3. User Guide

SPECIFICATIONS

LED DISPLAY

CAPS| The Caps Lock indicator may not light,but will still function normally.
---|---
| Will flash blue(3min.long) after pressing the “Connect” button until a BT connection is established.
It disappears when connected.
Charge| The lights are red when the keyboard is charging.
Turns off when the battery is fully charged.
Flashes red, when the battery is weak and should be charged.
Power| Lights up blue for about 4 sec when being turned on.

KEYS AND FUNCTIONS

Press the Fn key and hotkey together to activate the action.

PAIRING STEP

Step 1. Turn on the keyboard’s power button.
The blue status light will be on for 4 seconds and then be off.
Step 2. Press the connect button, the Bluetooth indicator will be blinking blue.
Step 3. Go to your tablet’s “Settings” – “Bluetooth”, and flip the switch to the “on” position.
It will automatically search available Bluetooth devices in the vicinity.
Step 4. When you find the device “Bluetooth 3.0 Keyboard”, click Pair.

SPECIAL NOTE

1. Only one device can be actively paired at one time.
2. For another Bluetooth-enabled device, please verify the Bluetooth Standard&compatibility before attempting to connect to the keyboard.
3. After pairing for the first time, your device will connect to the keyboard automatically when opening the keyboard.
4. In case of connecting failure, delete the pairing record from your device, and try the above procedures again.

POWER SAVING MODE
The keyboard will enter sleep mode after being idle for 30 minutes.
To activate it, press any key and wait for 3 seconds.

HOW TO CHARGE IT

1. Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard.
2. In charging, the power indicator will turn red. Generally, it takes approximately
3. hours for a full charge.(Charging adapter is not included)

TROUBLESHOOTING

If you are unable to connect the keyboard to your tablet, please try the following:

1. Starting with a full charge on both devices ensures that the process won’t be interrupted by a low battery.
2. Check your tablet’s Bluetooth is on.
3. Make sure that the keyboard is within the effective operation distance of 33 feet (10 M).

SAFETY INSTRUCTIONS

1. Keep the keyboard away from sharp objects that could damage it.
2. Do not put heavy objects on the keyboard.
3. Do not stretch, twist, or apply force to the keyboard.
4. To clean the keyboard, gently wipe it using a moist cotton cloth.
5. Please do not spill coffee, tea, or other liquids on the keyboard.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>