SZFEIC SL37 Spot Cob Light Integrated Headlamp User Manual

May 15, 2024
SZFEIC

SZFEIC LOGO User ManualSZFEIC SL37 Spot Cob Light Integrated
Headlamp SL37
SPOT & COB LIGHT INTEGRATED HEADLAMP

SL37 Spot Cob Light Integrated Headlamp

SZFEIC SL37 Spot Cob Light Integrated Headlamp -
FIGURESZFEIC SL37 Spot Cob Light Integrated
Headlamp - FIGURE 1

SL37 Rechargeable Headlamp

  1. Using CREE XML3 high brightness lamp beads and COB lamp beads for lighting.
    Powered by one ARB-D21-5000mAh rechargeable Li-ion battery.

  2. The circuit adopt long battery life constant current, super long runtime.

  3. Hidden USB type-C charging port, with a high current of 1.5A for fast charging.

  4. Anti-reverse connection design to prevent circuit damage caused by battery reverse installation.

  5. Aluminium / Magnesium alloy is used for the main body and PC material for the bracket.

  6. One button controls all functions.

  7. Adopt double-sided anti-reflection tempered glass lens, the lighting is very clear.

  8. The built-in temperature control module automatically adjusts the brightness according to the working condition and external temperature to achieve the best working condition and extend the service life of the headlamp.

  9. Weight: 198g (excluding battery)

  10. Size: 97.560.542MM

Operating Instructions

  1. Please take out the battery insulating sheet from the battery compartment for first time use.
  2. Power On/Off: Press and hold the button for 2 seconds to switch on and off.
  3. Gear Switching: In the power-on state, single click the button to switch gears, the brightness modes will cycle through COB, Moon, Med, High, Turbo successively. The first power-on gear is the COB gear.
  4. Gear Memory Function: The current gear is memorized when the machine is turned off. It will start to work in the current memorized mode the next time.

Battery Power Indicator

  1. Button indication light: When the battery is installed, ifthe button indicator light is green light on, indicating that the battery is fully charged and can be used normally. If the button indicator light is red light on, indicating that the battery is low power, please charge it in time.
  2. Power Inquiry : In the off state, single click the switch button to observe the button indicator light:
    Indicator Light Green light on(50% -100%Power)
    Indicator Light Green light flash (10%-50% Power)
    Indicator Light Red light flash(0% -10%Power)

Charging Instructions

  1. Adjust the angle of the headlamp to reveal the charging port, uncover the dust cap and plug the charging cable into the charging port of the headlamp.
  2. The indicator green light of the button position flashes to indicate normal charging; the indicator green light of the button position is always on to indicate the charging is completed.
  3. One ARB -D21-5000mAh rechargeable Li-ion battery, charging time is about 4H. Support the spotlight’s medium bright gear when charging. After charging is completed, cover the dust cap tightly to avoid dust or debris entering to affect the protection performance.
  4. The original battery comes with a charging port, which can be charged separately. Insert the charging cable into the battery positive charging port, the green light flashes, in normal charging process; the green light is always on, the battery is fully charged.

Technical Parameters

ANSI/PLATO FL1 SPOTLIGHT MODE
Turbo High
Output 1100 Lumens
Runtime 14 hours 51 minutes

hours 27 minutes
Range| 207 meters| 179 meters| 141 meters| 32 meters
 Light Intensity| 10780 candela| 8085 candela| 5222 candela| 257 candela
ANSI/PLATO FL1| COB LIGHT
Output| 500 Lumens
Runtime| 47 hours
Range| 37 meters
 Light Intensity| 355 candela
Impact Resistance| 1.5 meters
Waterproof| IPX8

Test Conditions: One ARB -D21-5000mAh rechargeable lithium-ion battery, temperature 21± 3°C, humidity 50%-80%.

  • SL37 headlamp has a temperature control protection function, the runtime of turbo mode marked in the table is the cumulative time.

Battery Specification

Type Dimensions Nominal Voltage Usability Remark
ARB-D21 series 21700 3.7V Recommended
ARB-D18 series 18650 3.7V Recommended Need Match With Conversion Sleeve
Non-rechargeable Battery (Li-ion) CRA123 3V Available Need Match With

Conversion Sleeve
Rechargeable Battery (Li-ion)| 21700| 3.7V| Caution|
Rechargeable Battery (Li-ion)| 18650| 3.7V| Caution
|
Rechargeable Li-iron phosphate Battery| 21700| 3.7V| Banned|
Rechargeable Li-iron phosphate Battery| 18650| 3.7V| Banned|

Note: 21700 lithium ion (Li-ion) battery is an industrial battery, not a civil battery with safety guarantee. When the battery due to poor quality or improperly used (short circuit, high temp- erature, etc.), it may burn, explode and endanger personal and property safety. If using “Caution” battery types, you should understand the risks and voluntarily assume corresponding responsibilities. High-quality Li-ion battery with protective circuit will reduce risks.

Use and Maintenance

  1. The headlamp band and bracket are factory pre-assembled, users do not need to assemble it by themselves. Please adjust the light band to a comf- ortable wearing position before use.

  2. Do not disassemble the sealing parts of the lamp, otherwise the warranty will be invalidated and the lamp may be damaged.

  3. Please use high-quality batteries, and take out the batteries from the lamp when the lamp is not used for a long time, otherwise the lamp may be damaged due to battery leakage.

  4. After long term use, if the O-ring of the lamp is found to be worn. Please replace the O-ring in time to maintain the waterproof performance of the lamp.

  5. Please clean the conductive surface of the lamp frequently to ensure the normal operation of the lamp, especially when the lamp flickers abnormally or cannot be turned on. The following are the main reasons why the lamps flicker abnormally or fail to light up:

  6. Low battery power.
    Solution: Charge or replace the battery (please pay attention to the direction when inserting the new battery).

  7. The thread is soiled, or the conductive contact surface/contact point of the PCB is soiled.
    Solution: Clean the thread or clean the conductive contact surface/contact points of the PCB with an alcohol swab.If the above methods do not work, please contact the dealer and follow the terms of after-sales service for warranty.

Packing List

  1. 1 SL37 Headlamp, 1 ARB-D21-5000mAh Battery, 1USB Type – C Charging Cable, 1Sealing Ring, 1User Manual, 1Warranty Card, 1 Headband, 1Headlamp Top Belt, 1*Headlamp Bracket.

Warning

  1. To avoid eye damage caused by high-brightness headlamp, please do not look directly at the LED light source of the headlamp.

SZFEIC LOGO

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SZFEIC User Manuals

Related Manuals