Neomounts EAMER-W050 Bracket for Projector Instruction Manual
- June 5, 2024
- Neomounts
Table of Contents
Neomounts EAMER-W050 Bracket for Projector
BEAMER-W050BLACK
PARTS
STEPS
STEP 1
- Install the extension brackets
STEP 2
- Attach the VESA plate
STEP 3
- Install the mount, route the cables and place the cover
STEP 4
- Adjust depth
STEP 5
- Adjust the mount to your desired position and loosen or tighten the screws if necessary
CAUTION
- To ensure safety. please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising From human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only. At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Avoid places that are subject to high temperatures, humidity, or contact with water. Do not install the product near air conditioning vents or areas with excess dust and fumes. Only install on vertical walls and avoid slanted surfaces. Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined.
- The mounting location must be able to withstand an earthquake or another strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread)
- Celling once displays DNA rocket are removed. tans may occur after did use Stains related type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>