Rollei Lion Rock Traveler Ball Head User Manual
- June 5, 2024
- Rollei
Table of Contents
Lion Rock Traveler Ball Head
User Manual
Components of the ball head
- Platform
- Ball
- Main body
- Main fixation
- Base
- Swivel lock
- Fine adjustment
- Quick-release plate
- 1/4“ camera screw
Components of the platform
10. Base
11. Spirit level
12. Anti-slippery groove
13. Locking of the quick release plate
14. Safety button
Attaching the quick release plate
- Loosen the locking screw of the base plate. In addition, press the safety button to open the base plate completely.
- Align the quick release plate as shown in the picture.
- First, insert one side of the plate and then the other.
- If the quick release plate is well-positioned, lock the platform locking knob again.
Remark: Loosen the platform locking knob to move the quick release plate horizontally. Press the safety button and loosen the locking knob to take out the quick release plate.
Using the damping mechanism
The damping mechanism will help to prevent the camera and lens will suddenly
fall down if you loosen the main knob. Therefore you can adjust the damping
according to the weight of your equipment. 
Setting the damping
- Attach your camera to the ball head and lock the platform locking knob (A).
- Make sure that the damping fine adjustment knob (B) is totally loosened.
- Loosen the main fixation (A) and check at which point the platform can be moved with the damping tightness which fits your requirements the most. You should be able to adjust the camera angle, but without worrying about the camera falling down suddenly.
- Rotate the damping fine adjustment knob (B) clockwise until you cannot move it anymore. The damping is now set to this point and the main fixation (A) cannot be loosened any further as the position is set now.
How to relieve damping
- Gently lock the main fixation (A).
- Rotate the damping fine adjustment knob (B) counterclockwise until it is totally loosened.
- Now the damping is released.
After locking it, the knob can be extended to the side and you can change the
position of the main fixing screw. In this way, you can tighten or loosen the
screw further.
Notes
- Do not overload.
- Please do not use the product at temperatures lower than -40°C and higher than +70 °C. When used in environments with moisture, mud, or dust, we recommend cleaning the product with a dry cloth. If the tripod has become wet from rain or water, each leg should be extended for a few days until there is no more water in the legs.
- Avoid sand or other small objects going inside the ball head. Please use a dry cloth to remove dirt on the ball head after using. Do not use any lubricant or oil for cleaning.
- Please do not expose the tripod permanently to the sun. Avoid placing the product longer on the windscreen for hours at high temperatures.
- For safety reasons, keep away from charged objects, high voltage equipment, and strong chemicals when using this product.
Design and technical data are subject to change without notice.
Rollei GmbH & Co. KG, In de Tarpen 42, D-22848 Norderstedt
Service-Hotline:
+49 40 270750270
www.rollei.com
/rollei.foto.de
@rollei_de
References
- cewe - best in print
- Rollei ? Online shop for camera, video and photo equipment
- Rollei: Der Online-Shop für Kamera- Video- und Foto-Equipment – Rollei
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>