AT2101 Atuvos Tag User Manual
- June 5, 2024
- ATUVOS
Table of Contents
AT2101 Atuvos Tag
Product Overview
The ATUVOS TAG (AT2101) is a Find My Network accessories lets you Find
everything that matters to you . The Apple Find My network provides an easy,
secure way to locate compatible personal items on a map using the Find My app
on your iPhone,iPad, iPod touch, or Mac. Simply pair your ATUVOS TAG with the
Apple Find My app to view it right alongside your Apple devices. If your item
ever goes missing, you can put it in Lost Mode to display a message and
contact information to anyone who might find it.
The Find My network is encrypted and anonymous, so no one else, not even Apple
or the maker of your personal item, can view its location. The ATUVOS TAG uses
Bluetooth low energy technology (BLE) and a replaceable battery (CR2032),
which gives you up to 6 months of battery life. Setup is quick and easy. Make
your life easier today.
Factory Reset
Long press and hold the button for about 10 seconds until the buzzer beeps long time. The device is now in pairing mode.All connection data will be cleared. You must remove the accessory from the app and then add it back.
Button Action & Buzzer Indicators Status
Key Features
- Range: Up to 400ft (120m)
- Precision Finding NFC tap for Lost Mode Voice Control
- Loud Ring
- Water-Resistant
- Replaceable battery
- Privacy is built-in
- Compact design
What’s In The Box
- ATUVOS TAG
- Build-in Battery (CR2032)
- User Manual
Specification
- Battery: CR2032, DC 3V: Operation Temperature: 0-40℃
- Firmware Update: OTA (Find My App)
- Wireless Network: Bluetooth
- Operating frequency: 2402~2480MHz
- Max. transmit power: 8dBm
Quick Start Guide
- Update to the latest iOS or iPadOS.Turn on Bluetooth.
- Pull tab when ready to use. Hold near device and tap Find My App
- Tap “Add Item” located at the Bottom on “Items” menu then select “Other Supported Item” and follow onscreen instructions.
Firmware Update
To gain better experience with ATUVOS TAG, we strongly recommend that you
update the firmware whenever updates with all the latest improvement and fixes
areavailable:
- Open the Find My app.
- It is important to leave the Find My app running while it finishes updating the device.
DO NOT to minimize the app, close the app, or interrupt the update until the updates are successful to prevent problems.
Battery Replacement
ATUVOS TAG has a replaceable CR2032 battery that will last up t 1 year. When the battery runs out you can replace it in 3 steps.
- Use your fingernails or insert a smaller tool into the small gap on the side and Open the battery cover located in the back of the ATUVOS TAG.
- Use a paperclip to remove battery and then Replace a new one, placing the battery positive side up.
- Close the battery cover by aligning the top hole on both lids.
Warning:
- ATUVOS TAG contain coin cell battery which is hazardous when ingested. Keep batteries out of reach of young children and pets;
- The battery must be removed from the ATUVOS TAG before it is scrapped.
- The battery is to be disposed of safety;
- Using incorrect type batteries can cause damage to people or accessory.
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in particular installation. If this equipment does cause harmful
interference to radio or television.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The device can be used
in portable exposure condition without restriction,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>