ATUVOS AT2301 Vos Tag Instruction Manual
- June 1, 2024
- ATUVOS
Table of Contents
ATUVOS AT2301 Vos Tag Instruction Manual
Introduction
The Vos Tag works with Apple Find My to help you keep track of your stuff even
further away. This tag is water-resistant, and has a replaceable battery that
lasts up to one year. The compact design makes it easy to attach to your
important things such as keys, bags, and suitcases.
A simple setup can pair this item tracker with the Find My app on your Apple
devices to track down your nearby items by playing a sound. The anonymous and
encrypted Find My network also ensures your privacy and safety
Included in the Box
Item | Quantity |
---|---|
Vos Tag | 1 |
User Manual | 1 |
Note: To use the Apple Find My app or the Find Items app on Apple Watch to locate this item, the latest version of iOS, iPadOS, macOS, or watchOS is recommended.
Controls and Status
Power Button | Status | Buzzer |
---|---|---|
Quick Press | Power On | Two Short Beeps |
Long Press for 3 Seconds | Power Off | Long Beep |
Long Press for 10 Seconds | Reset* | Two Long Beeps with a 7-second Interval |
This will restore the tag to factory settings and clear all the connection data. You must remove the item from the Find My app and add it back before using it again.
Functions
Long-distance Tracking
If your item is lost outside the 60-metre Bluetooth range, the Find My network
connecting hundreds of millions of Apple devices worldwide will help track
your item. All the while, your privacy is protected at every step of the way
Left-behind Alerts
If your item is left behind and disconnects from the Bluetooth of your Apple
device, the Apple Find My app will instantly send you notifications without
additional fees
Discourage Unwanted Tracking
If someone’s tag lands on your items, your Apple device will automatically
detect that tag and send you an alert to prevent unwanted tracking. If you
still can’t find it, the tag will make a sound to let you know.
Pair with Find My App
-
Turn on your iOS device’s Bluetooth. Make sure your iOS device is in the latest version
-
Quick press the tag’s power button to turn it on and place it near to your iOS device
-
Open Find My app, tap “Items” and then “Add Item”. Select “ Other Supported Item” and follow the in-app instruction to complete pairing.
-
For subsequent paring with other items, tap “+” and then “Add Other Item” to pair.
Note: To ensure the best user experience, please update the firmware whenever the update is available in Find My app
Battery Replacement
Vos Tag has a replaceable battery that lasts up to 1 year. If the battery runs down, you can replace it in 3 steps.
-
Use your fingernail or insert a small tool into the gap to open the battery cover
-
Use a paperclip to remove the battery and replace with a new one and face the positive terminal up
-
Close the battery cover by aligning the hole.
Warning
- Keep the battery out of reach of kids and pets. This tag contains a coin cell battery which can be dangerous if chewed on or swallowed.
- Use batteries of the same type (CR2032) for replacement. Otherwise, it might cause damage.
- If you must discard the tag, take the battery out first.
- The old battery needs to be disposed of at a battery recycling container
Specifications
Dimensions | 34.2134.2110.70 mm |
---|---|
Weight | 11 g |
Range | Up to 200 ft (60 m) |
Battery | CR2032 Coin Cell Battery, DC 3V |
Frequency | 2402~2480 MHz |
Working Temperature | 0~40°C(0~104°F) |
Transmit Power | 4 dBm |
Connectivity | Bluetooth |
Compatibility | iOS Devices |
Firmware Update | Find My app |
Voice Control | Siri |
Troubleshooting
-
Fail to add Vos Tag to the Find My app
a. Make sure the tag is powered on and near to the device.
b. Make sure your iOS device is in the latest version and the Bluetooth is on.
c. Make sure the tag has not been paired with the Find My app on other iOS device.
d. If you follow the previous steps and still fail to add, long press the tag’s power button for 10 seconds to reset and then try again. -
Vos Tag cannot function well.
a. Check if the battery level is low. If so, replace it with a new one of the same type (CR2032).
If you have any further questions, please contact us: support@atuvos.com.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
IC
The licensed transmitter/receiver contained in this device is compliant with Innovation, Science and Economic Development Canada’s RNC for licensed radio devices. The operation is permitted under two conditions:
- The device must not cause interference;
- The device must accept any radio interference, even if the interference is likely to compromise its operation. RF Exhibition Statement:
CE Statement
Hereby, Comet Innovation Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Technical Description:
Bluetooth Frequency Range: 2402 – 2480 MHz
Bluetooth Transmit Power: 4 dBm EIRP
Legal Notice
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet Apple Find My network product
specifications and requirements.
Apple is not responsible for the operation of this device or use of this
product or its compliance with safety and regulatory standards.
Credit Lines
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.