ATUVOS AT2101 Tag Bluetooth Tracker User Manual
- June 9, 2024
- ATUVOS
Table of Contents
ATUVOS AT2101 Tag Bluetooth Tracker
Product Overview
The ATUVOS TAG (AT2101) is a Find My network accessory helping you quickly
find things you are looking for. The Apple Find My network provides an easy,
secure way to locate compatible personal items on a map using the Find My app
on your iPhone, iPad, iPod touch, Apple Watch, or Mac. Simply pair your ATUVOS
TAG with the Apple Find My app to view it right alongside your other items. If
your item ever goes missing, you can put it in Lost Mode to display a message
and contact information for anyone who might find it.
The Find My network is encrypted and anonymous, so no one else, not even Apple
or Atuvos, can view its location.
The ATUVOS TAG uses Bluetooth low energy technology (BLE) and a replaceable
battery (CR2032), which gives you up to 1 year of battery life. Setup is quick
and easy. Make your life easier today
* To use the Apple Find My app or the Find Items app on Apple Watch to locate this item, the latest version of iOS, iPad OS, macOS, or watch OS is recommended.
Factory Reset
Long press and hold the button for about 10 seconds until the buzzer beeps:
Two long beeps separated by 7 seconds, followed by two short beeps.
The device is now in pairing mode. All connection data will be cleared. You
must remove the accessory from the app and then add it back.
Button Action & Buzzer Indicators Status
Button Action
| Status| Buzzer
---|---|---
Quick Press| Power on|
Two short beeps
Press & hold for about 3 seconds
| Power off| Long beep
Press & hold for about 10 seconds| Reset|
Two long beeps separated by 7 seconds, followed by two short beeps
Key Features
Range: Up to 400ft (120m)
NFC tap for Lost Mode
Voice Control with Siri
Loud Ring
Water Resistant
Replaceable battery
Privacy is built in
Compact design
What’s In The Box
ATUVOS TAG
Built-in Battery (CR2032)
User Manual
Specification
- Battery: CR2032, DC 3V
- Fir ware Update: OTA (Find My App)
- Operating frequency: 2402~2480MHz
- Max. transmit power: 8dBm
- Operation Temperature: 0-40℃
- Wireless Network: Bluetooth
Quick Start Guide
-
Update to the latest iOS or iPad OS. Turn on Bluetooth in Control Center or in Settings > Bluetooth.
-
Pull tab when ready to use. Hold near device and open the Find My app
-
Tap +, then tap Add Other Item and follow the onscreen instructions.
Firmware Update
To ensure the best possible experience with ATUVOS TAG, we strongly
recommend that you update the firmware whenever updates are available:
- Open the Find My app and select the item.
- There will be a “Update available” whenever the update is available.
Tap it then select “Update” to begin
Battery Replacement
ATUVOS TAG has a replaceable CR2032 battery that will last up to 1 year. When the battery runs out you can replace it in 3 steps.
①. Use your fingernails or insert a smaller tool into the small gap on the side and Open the battery cover located in the back of the ATUVOS TAG.
②. Use a paperclip to remove battery and then Replace a new one, placing the battery positive side up
③. Close the battery cover by aligning the top hole on both lids.
Warning:
- ATUVOS TAG contains a coin cell battery which is hazardous when ingested. Keep batteries out of reach of young children and pets;
- The battery must be removed from the ATUVOS TAG before it is discarded;
- The battery is to be disposed of safety;
- Using incorrect type batteries can cause damage to people or accessory
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
IC
The licensed transmitter/receiver contained in this device is compliant with Innovation, Science and Economic Development Canada’s RNC for licensed radio devices.The operation is permitted under two conditions:
- The device must not cause interference;
- The device must accept any radio interference, even if the interference is likely to compromise its operation.
RF exhibition statement:
The equipment complies with the IC radiation exposure limit established for an
uncontrolled environment. This equipment must be installed and used with a
minimum distance of 5 mm between the radiator and your body.
CE Statement
Hereby, Comet Innovation Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Technical description:
Frequency Range: Bluetooth: 2402 – 2480 MHz
Transmit Power: Bluetooth: 8 dBm EIRP
Legal notice
Use of the Works with Apple badge means that a product has been designed to
work specifically with the technology identified in the badge and has been
certified by the product manufacturer to meet
Apple Find My network product specifications and requirements.
Apple is not responsible for the operation of this device or use of this
product or its compliance with safety and regulatory standards.
Credit lines
Apple, iPhone, iPad, iPad OS, watch OS, iPod touch, and macOS are trademarks
of Apple Inc., registered in the U.S. and other countries. IOS is a trademark
or registered trademark of Cisco in the U.S. and other countries and is used
under license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>