CASIO SK-10 Electronic Musical Instrument Keyboard User Manual

ELECTRONIC MUSICAL INSTRUMENT
INSTRUMENTO MUSICAL ELECTRONICO
OPERATION: MANUAL 1

SPARE PARTS MASTER

INTRODUCTION

Your new CASIO SK-10 is a state-of-the-art musical instrument that uses the latest digital technology to make its operation as simple as possible. In addition to preset keyboard tones and rhythms, the SK-10 lets you “sample” (digitally record) sounds and integrate them as keyboard voices. A unique new sampling repeat function lets you put sampled sounds into any of 16 preset patterns at random. The SK-10 also features advanced functions such as a memory function that lets you record your own melodies and a Disney-tune demonstration mode. In order to fully enjoy all of the features and functions of the SK-10, be sure to read this manual carefully before using your new Casio keyboard.
Preset Tones – simulate 5 different instrument sounds:

• Piano
• Vibraphone
• Trumpet
• Flute
• Clarinet (Pipe organ tone is also present in the “sample” area when the power is turned on.)
• Auto-Rhythms – let you accompany the music with 6 preset rhythms.
• Sound Sampling – lets you record any sound using the built-in microphone.
• 4 Preset Demonstration Tunes —let you listen to preset Disney tunes in an endless loop.
• Sampling Repeat Function – lets you enjoy 16 different auto-playback patterns featuring a sampled sound, each time a new sound is sampled.
• Memory Function – lets you record your composition as you play it on the keyboard.

CONTROL LOCATIONS

1. Built-in speaker
2. Volume control
3. Power indicator
4. Mode selector
5. Tone selector
6. Rhythm selector
7. Memory start button Loop key
8) Tempo control buttons| 9. Start/stop button
10. Demonstration button
11. Sampling effect button
12. Built-in microphone
13. Sampling button
14. Envelope keys
15. Reverse key
16. Clear key
17.AC adaptor jack
---|---

CHOOSING A POWER SUPPLY

This unit operates on both AC and DC power. Be sure to set the mode selector to “power off” when replacing batteries or connecting the AC adaptor to the unit.
DC POWER

• Dry batteries This unit can be powered by 5 AA size (SUM-3) manganese dry batteries.
  Weakened batteries will result in lower volume or poor tonal quality. The power indicator lamp will gradually lose its brightness when battery power weakens. At this time, change batteries or shift to one of the alternate power sources mentioned below.

Inserting batteries

1. Press down on the battery compartment cover, located on the bottom of the unit, and slide it in the direction of the arrow.

2.  Insert five AA batteries taking care that the polarity is correct. When replacing old batteries to new ones, it is advisable to replace all five batteries at the same time for longer battery life.
   *Standard battery life is approximately 8 hours.
   •Car battery With the car battery adaptor (CA-1, optional), DC power is supplied from a car battery through the cigarette lighter socket.
   IAC POWER
   An AC adaptor (AD-1, optional) is required to connect to an AC outlet, Use only an adaptor with the same voltage rating (100, 117, 220, or 240) as the power supply in your area to prevent component damage. Plug the AC adaptor into the AC outlet and the cord into the unit. This will automatically cut off the battery power supply.

•Auto power off function Power is automatically cut off approximately 7 minutes after the last operation of the unit. The power supply can be restored by switching the power OFF and then ON again. Auto power off does not activate when the mode selector is set to “sampling repeat”.
CAUTION Use only genuine CASIO adaptors to avoid the risk of damage.
• Remove batteries from the battery compartment when the unit is not used for extended periods. (Battery leakage can damage electrical parts.) The adaptor may become warm when left connected to an outlet. This is normal, but the adaptor should be disconnected when not in use.
THE FOLLOWING CONDITION CAN CAUSE BATTERIES TO BURST:

1. Use of adaptors other than genuine CASIO adaptors.
2. Loading batteries with polarities reversed.

PLAYING NORMALLY

1. Set the mode selector switch to play”.

2. Adjust the volume by sliding the volume control.

3. Select one of the preset tones by the tone selector.
   ‘Every time you switch the unit on and then set the tone selector to “sample”, the pipe organ tone is selected

4. Now you are ready to play. Up to 4 notes can be played simultaneously on the keyboard (4-note poly-phonic).

USING SOUND SAMPLING

You can record any kind of sound using your SK•10. The unit converts the sound into digital information that can be used to create a new tone.
•Sampling a Sound

1. Set the mode selector to “play”.

2. Press the sampling button.

3. Produce the sound to be sampled near the built-in microphone. Sampling begins automatically when sound is detected (auto trigger).

4.  A short tune using the sampled sound indicates that sampling is complete. Now, the sampled sound can be played on the whole keyboard. (regardless of the position of the tone selector).
   Sampled sound can be played in its original pitch on the A4 key.

*If you sample another sound, the sound you previously sampled will be automatically erased. ‘If you switch the unit off (or when the auto power-off function activates), the sampled sound will be automatically erased, and the “pipe organ” tone will be reassigned to the tone selector “sample” position.
If you move the tone selector and select a different tone after sampling, your sampled sound will be automatically assigned to the tone selector “sample” position in place of “pipe organ”.

• Adding Loop, Reverse, and Envelope Effects to Sampled Sounds You can modify a sampled sound using any or all of the following special effects:
• Loop — Lets you lengthen a sampled sound. You can repeat the sound continuously by pressing a melody key.
• Reverse — Plays a sampled sound backward.
• Envelope — Modifies a sampled sound by changing the sound wave shape.
  The following gives some idea of the quality you can expect for each of the envelope keys. To get a clearer idea of the effect each envelope key has on the sampled sounds, modify the same sampled sound using each envelope key.

USING SOUND SAMPLING

1. Piano/Guitar damped tone, slow decay.
2. Long release, damped tone, slower decay than  (1)
3. Reverb, some sustain after de-cay begins.
4. Slow attack, slow volume increase at the start.
5. Tremolo I, fade out with a slight vibrato.
6. Tremolo II, slight vibrato.

ENVELOPES are most noticeable after you have LOOPed your sample. Why? Because the ENVELOPES are most noticeable on a long-held note, in order to hear the swelling in or slow dying away of the sound. If you LOOP your sample first, you can hold the note down for a long time and the sample will keep repeating (rather than just running its 0.6-second course and stopping), and then you can really hear what the ENVELOPE does.
•Activating a Sampled Sound Special Effect

1. Set the tone selector to “sample” and recall your sampled sound.

2. Press the sampling effect button.
   

3. Press either the loop, reverse, or one of the six envelope keys.
   A ride cymbal sound confirms your selection.

Notes:

• The reverse effect takes more time to apply than other effects. Continuous high agogo sounds will be heard during internal processing until the final ride cymbal sound is heard.
• Loop and reverse effects can be performed and canceled in succession each time the effect key is pressed.
• Three effects (loop, reverse, one of 6 envelopes) can be simultaneously applied to a sampled sound.
• All effects can be canceled at a time by pressing the sampling effect button followed by the clear key.

USING SAMPLING REPEAT FUNCTION

By using the sampling repeat function, any sound you make near the built-in microphone will be instantly transformed into a unique and entertaining musical pattern.
• To use the Sampling Repeat Function

1. Set the mode selector to “sampling repeat.”

2. Make a sound near the built-in microphone.
   You don’t have to press the sampling button.

3. Within a second, one of the 16 patterns featuring the sampled sound will be played back automatically.
   Try making many different sounds. You’ll enjoy hearing how they sound when they’re integrated in various ways in the preset patterns.

Notes: *When you switch from the sampling repeat mode back to the play mode and the tone selector is set to “sample,” the last sound sampled in the sampling repeat mode will sound.

• The keyboard is inoperable when the sampling repeat mode is selected.
• The auto power-off function is improper-ate when the sampling repeat mode is selected.

USING AUTO-RHYTHMS

The SK-10’s auto-rhythms function features a total of 6 different, preset rhythms.
•Using the Auto-Rhythm Selector

1. Set the mode selector to “play”.

2. Select one of the auto-rhythms by the rhythm selector.

3. Press the start/stop button to start the rhythm.

4. Alternately press the tempo control buttons to raise or lower the tempo of the rhythm between 54 and 254 beats per minute. Press both buttons at the same time to set the tempo to 110 beats per minute.

5. Press the start/stop button once again to stop the auto-rhythm play.

PLAYING DEMONSTRATION TUNES

The SK-10 features 4 demonstration tunes, which are continuously played.

1. Heigh-ho (Frank Churchill)
2. Some day my prince will come (Frank Churchill)
3.  Who’s afraid of the big bad wolf? (Frank Churchill)
4. When you wish upon a star (Leigh Harline)
   1. Set the mode selector to “play”.
   2. Press the demonstration button to start the demonstration tunes.
   The demonstration tunes play in an endless loop.
   3. When playing the demonstration tunes, the tempo can be raised or lowered between 54 and 168 beats per minute.
   4. At first, the demonstration tunes are played with the pipe organ tone. You can freely alter the melody tone of the demonstration tunes by the tone selector. (Auto-rhythm cannot be altered.)
   ‘If you select “sample” after you sam-pled, you can enjoy the demonstration tunes played with the sampled sound.
   Each time the demonstration tune changes, the melody tone will be reset to the pipe organ tone regardless of the position of the tone selector.
   5. Press the start/stop button to stop the demonstration tunes.
   The keyboard is inoperable while playing demonstration tunes.

USING THE MEMORY FUNCTION
The SK-10 has a memory storage function that allows you to record a tune and play it back.
•Recording a Melody

1. Set the mode selector to “record”.

2. Press the memory start button. The metronome tone begins to beat, and the recording starts as soon as you play a note.
   • If you want to add an auto-rhythm to your melody, select a rhythm and press the start/stop button before pressing the memory start button.
   ‘You can freely change the preset tones and auto-rhythms during recording.

3. Press the start/stop button to stop recording.
   ‘When you begin a new recording, any notes previously stored in memory will automatically be deleted.
   The SK-10 memory can hold 496 steps. A single keyboard note occupies one step. A single change of the tone selector or rhythm selector counts as a half-step. Recording automatically ends when you exceed 496 steps.

•Playing Back a Melody

1. Set the mode selector to “play”.

2. Press the memory start button. Playback starts. The melody plays in an endless loop.

3. Press start/stop button to stop the melody.

TROUBLESHOOTING

‘For any malfunction, always check battery condition first. (see page 5)

2. Auto power-off function has been activated.
3. The mode selector is set to “sampling repeat”.| 1. Raise up the volume.
2. Set the mode selector to “power off” and to “play” again.
3. The keyboards do not operate when “sampling repeat” is selected. Set the mode selector to “play”.
No rhythm.| 1. Volume control turned down.
2. The mode selector is set to “sampling repeat”.| 1. Turn up the volume.
2.Set the mode selector to “play”.
The sampled to- ne is deleted.| 1. Another sound has been sampled.
2. Power has been turned off.| 1. The sound previously sampled is automatically erased if you sample another sound (see page 8).
2. Once you turn the power off (or when the auto-power-off function activates), the sampled sound is automatically erased.
Occasional Interference.| Refrigerators, washing machines and similar electric appliances.| Use outlet as far away as possible from the appliance thought to be the cause.
The power Indicato temporarily flashes or one of the preset tones sounds continuously in “power oft” status.| Slide the mode selector between “power off” and “play” 2-3 times. (This may occur when inserting batteries or connecting the AC adaptor)

CARE OF YOUR KEYBOARD

1. Avoid heat, humidity, and direct sunlight. Do not overexpose the unit to direct sunlight, place it near a heater, or in any area subject to high temperature.
2. Avoid severe impacts and do not drop. Severe impacts can result in malfunction. When carrying or transporting the unit, protect the keyboard and controls by packing with soft cloth.
3. Keep the unit free of liquids, dust, particles, etc. Do not allow foreign matter to enter between the keys. Be especially careful of metallic objects such as hairpins, sewing needles or coins. Also, do not allow the unit to get wet.
4. Never attempt to modify any part of the unit. Your keyboard is a precision musical instrument made up of sophisticated elec-tronic parts. Any modification of, or tampering with internal components can cause trouble or malfunction.
5. Do not use lacquer thinner or similar chemicals for cleaning. Clean the keyboard with a soft cloth dampened with a mild detergent solution and squeeze it until almost dry.
6. Remove batteries before extended storage. Batteries left in the unit for long periods can leak and cause damage to electronic circuitry.
7.  In case of malfunction… Check whether buttons and connections are set correctly as indicated in the troubleshooting chart of page 14 of this manual. If the unit still does not work proper. ly, contact the original retailer or a nearby dealer. Never attempt to repair the unit yourself. This can result in serious damage of the components.

SPECIFICATIONS

Model: SK-10
Number of keys: 32 (micro-mini)
Polyphonic:4-note polyphonic
Preset tones: 5; piano, vibraphone, trumpet, flute, clarinet (pipe organ tone in “sample” area unless another sound is sampled.)
Auto-rhythms: 6; rock, disco, swing, samba, march, waltz •Tempo control: .1 = 54 254
Real-time memory: 496 steps
Sampling function: 8-bit PCM •sampling rate: 9.38kHz •sampling time: approximately 0.6 seconds •sampling effect: envelope, reverse, loop •sampling repeat: 16 patterns
Demonstration
function:4 melodies (one-touch continuous)
Terminals:AC adaptor jack (DC 7.5V)
Built-in speaker:  6.5cm dia. (output — 1 W)
Auto power off
function: approximately 7 minutes after last operation
Power source: 5 AA-size dry cells, AC adaptor AD-1 (option) or car adaptor CA-1 (option)
Standard battery life:  approximately 8 hours
Power consumption: 1.6 W
Dimensions:408(W) x 137(D) x 41.5(H) mm (160s/8″ (W) x 53 ‘5/16″ (D) x 165/1r,” (H))
Weight: 0.8 Kg (1.8 Ibs) including batteries
Standard accessories: 5 AA-size dry cells
Designs and specifications are subject to change without notice.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A.
(not applicable to other areas). This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules. which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient the receiving antenna relocate the computer with respect to the receiver move the computer away from the receiver plug the computer into a different outlet so that computer and receiver are on different branch circuits. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”. This booklet is available from the US Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
WARNING: CHANGING THE VOLTAGE SELECTOR MAY REQUIRE THE USE OF A DIFFERENT LINE CORD OR ATTACHMENT PLUG OR BOTH. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

References

• TCPDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>