WMF 3200001217 KITCHENminis Kitchen Machine One for All Edition User Manual
- June 3, 2024
- WMF
Table of Contents
3200001217 KITCHENminis Kitchen Machine One for All Edition
User Manual
Operating Manual
Kitchen machine One for All Edition
Appliance assembly
1. Cover for mixer attachment
2. a) Mixing container, to-go drinking lid
b) Blade unit
3. Timer with LCD
4. Cover for accessories
5. Attachment for mixer accessories
6. Casing
7. Release button| 8. 3l mixing bowl
9. Splash guard
10. Speed controller
11. Flat beater
12. Dough hook
13. Whisk
14. Dough scraper
15. Cord winder
---|---
Important safety information
-
Appliances can be used by persons with reduced physical, sensory or mental capacities or a lack of experience and/or knowledge if they are supervised or have been instructed on how to use the appliance safely and they understand the hazards involved.
-
Children must not play with the appliance.
-
This appliance must not be used by children. Keep the appliance and its power cord out of the reach of children.
-
Switch the appliance off and disconnect it from the mains supply before changing accessories or approaching parts that move during use.
-
Always disconnect the appliance from the mains supply if it is to be left unattended as well as before assembling, disassembling, or cleaning it.
-
If the appliance’s power cord is damaged, it must be replaced by the manufacturer, its after-sales service, or a similarly qualified person hazards are to be avoided.
-
Care must be taken when pouring hot liquids into a compact food processor or blender as this liquid may be ejected out of the appliance again due to sudden steaming.
-
After using the appliance and accessories, clean all surfaces/parts that have come into contact with food. Please follow the instructions in the “Cleaning and care” section.
-
This appliance is designed for use in households and similar environments, e.g.
• In staff kitchen areas in shops, offices and other commercial environments;
• In farmhouses;
• By guests at hotels, motels, or other residential facilities;
• In bed-and-breakfast establishments.
The appliance is not intended for purely commercial use. -
Always use the appliance in accordance with these instructions.
Improper use may result in electric shocks or other hazards. -
CAUTION: To avoid hazards caused by inadvertently resetting the temperature regulator, this appliance must not be powered through an external switching device such as a timer or be connected to a circuit that is regularly switched on and off by a management system.
-
Care should be taken when handling the sharp cutting blades, emptying the jug, and cleaning.
-
Improper use may cause injury.
Before use
Read the instructions for use carefully. They contain important information
about the use, safety, and maintenance of the appliance.
They should be kept in a safe place and passed on to any subsequent users.
The appliance may be used only for the intended purpose in accordance with
these instructions for use.
The safety information must be observed whilst using the appliance.
Technical data
Voltage:
220-240V~ 50-60Hz
Power consumption:
370-430W
Protection class:?;/,l,l,l;km Njb mnkjb k,I
Safety information
Dangerous supply voltage!
Incorrect electrical installation or too high a supply voltage may cause
electric shocks.
-
The appliance should be connected only to earthed wall sockets that have been installed in accordance with the regulations. The supply cable and plug must be dry.
-
The main plug must be freely accessible so the appliance can be disconnected easily from the mains in an emergency.
-
Do not use the appliance and immediately remove the mains plug if
• The appliance or power cord is damaged.
• You suspect that there is a defect after the appliance has fallen or following a similar incident. -
Do not open the casing. Repairs should be carried out by a professional. Please contact an authorized service center. Liability and warranty claims are voided if you attempt to repair the appliance yourself or connect and operate the appliance incorrectly.
-
Do not immerse the appliance itself, the power cord or the mains plug in water.
-
Use the appliance only indoors in dry conditions. Never operate it in damp rooms or in the rain.
-
Do not switch on the appliance when the mixer attachment is empty.
-
Do not reach into the jug before unplugging the appliance from the mains.
-
Before removing the jug or the container, always wait until the blades have come to a complete standstill, switch off the appliance or unplug it from the mains.
-
Always set the speed controller to the Off position (0) before removing the mixer attachment.
Warning! There is a risk of scalding when processing hot food with the mixer attachment. In extreme cases, the mixer attachment could be damaged. Only food with a maximum temperature of 60°C may be processed. In this case, do not fill the mixer attachment more than halfway.
Purpose
The appliance includes accessories (flat beater, dough hook, and whisk) that
may be used only for whisking, mixing, kneading, and beating food.
The appliance is equipped with a mixer attachment that is suitable for
preparing smoothies and shakes.
Optional accessories enable the appliance to be used for a variety of
different applications: cutting and grating, meat mincing, rolling out
homemade dough, or cutting spaghetti and tagliatelle.
Getting started
-
Remove all packaging from the appliance.
-
Clean the device before use as described in the chapter on “Cleaning and care.”
-
Press the release button (7) to tilt the mixer arm upwards (Fig. A).
-
Push the required mixer accessory (flat beater, kneading hook or whisk) into the attachment as far as it will go and rotate it anticlockwise until it locks into place (Fig. B).
-
Place the mixing bowl (8) on the base. Ensure that the handle is on the side of the appliance. Turn the mixing bowl (8) in a clockwise direction (Fig. C).
Note: Do not use force when turning the mixing bowl (8). -
Press the mixer arm downwards until you hear it lock into place.
-
Set the speed controller (10) to the Off position (0).
-
Now insert the mains plug into the socket.
Note: The appliance has a built-in automatic cable winder (15). Any unrequired length of cable can be stowed away in the appliance. Pulling on the power cable automatically causes it to wind back into the appliance (Fig. D). -
The LCD (3) lights up white and shows the preset time “00”. The appliance can be used with or without the timer function. Follow the steps in the “Timer function” section to change the preset time.
Note: If the time-setting button is not pressed within one minute, the LCD (3) automatically switches itself off. -
Select the desired speed. The appliance starts.
-
The LED ring on the speed controller (10) lights up white.
Note: The appliance is equipped with a safety function. It will start only if the mixer arm is lowered into position correctly and the covers for accessories (4) and the mixer attachment (1) are in place.
Note: The food processor requires a start-up phase during which all of the mechanical components are synchronized. Short, loud operating noises may be produced, particularly when preparing the heavy dough. -
When the mix function has finished, set the speed controller (10) to the Off position (0).
-
Pull the mains plug out of the socket before emptying the mixing bowl (8).
Mixer accessories and how to use them
Accessory| Example
uses| Max. mixing
quantity| Speed
setting| Recommended
mixing time
---|---|---|---|---
Light to the normal dough
Flat beater
Cake dough/batter| 1.1 kg| 2-4| 40-80 secs.
Shortcrust| 1kg| 2-4| 40-60 secs.
Mashed potatoes| 1.3kg| 1-3| 40-70 secs.
Dough hook| Heavy dough
Yeast/pizza dough| 1.1kg| 1-2| 40-80 secs.
Bread dough| 1.1kg| 1-2| 40-80 secs.
Quark oil dough| 1.1kg| 3-5| 60-90 secs.
Whisk| Runny, light mixtures (folded in the air)
Egg whites| 2-8 eggs| 6-8| 60-80 secs.
Sponge dough| 7009| 6-8| 40-80 secs.
Whipped cream| 600g| 8| 40-80 secs.
Maximum quantity dough: 685g flour + 345ml water
Number of eggs: 2-8
The recommended mixing times are only guidelines. They may vary depending on
the quantity used.
Removing the mixer accessories
- Set the speed controller to the Off position (0) and remove the plug from the mains supply.
- Press the release button to automatically tilt the mixer arm upwards.
- Push the mixer accessory upwards as far as possible and turn it clockwise until it is released.
- Now pull the mixer accessory downwards to remove it from the holder.
Speed controller (10)
The appliance has a speed controller (10) with eight
different speed settings (1-8), a fold function, and a pulse function to
choose from, enabling you to work with different doughs and mixtures.
Fold function
The fold function (Fig. E) is used for folding light or runny ingredients into heavier mixtures (e.g. filled muffins, meringues, mousse, foamy foods, sponge mix or soufflés) or to slowly stir flour or other ingredients (e.g. raisins or nuts) into the dough. During folding, the appliance operates at a constant low speed, stops for a few seconds, and then starts folding again. To stop the fold function, set the speed controller (10) to the Off position (0).
Pulse function
To use the pulse function, select PULSE on the speed controller (10).
The motor operates at maximum speed while the speed controller (10) is set to
the pulse function. The maximum runtime must not exceed one minute.
Planetary mixing system
The planetary mixing system ensures that the ingredients are mixed thoroughly
and evenly. This prevents ingredients/dough from sticking to the edge.
Soft-start
The soft-start function always starts the appliance at a low speed,
irrespective of the selected speed.
The speed gradually increases until it has reached the required setting. This
prevents ingredients spraying out.
Electronic speed regulator
The appliance is equipped with an electronic speed regulator that serves to
keep the speed constant under different loads.
Timer function
The timer function can be used with or without the appliance’s other functions
to, e.g. set the exact time for the dough to rise. If you activate the timer
function, you can continue using the other functions on the appliance.
Note: The timer function can only be activated when the speed controller
(10) is in the Off position (0).
-
Press the Start/Pause button or the Plus/Minus buttons to turn on the display.
(Fig. F). The LCD lights up white and shows the preset time “00.” -
Press the Plus/Minus buttons to set the desired time. The time can be set in one-minute increments up to 99 minutes.
Note: The time can also be changed when the timer is activated, by pressing the Plus/Minus buttons. -
Press the Start/Pause button to activate the timer function. The icon appears on the LCD and the remaining time is shown.
-
Once the time has elapsed, the appliance beeps, and the timer function switches off.
Note: Hold the Start/Pause button pressed down for at least three seconds
to reset the timer. “00” appears on the display.
Note: The LCD switches off automatically after one hour if you do not
press the Start/Pause button, Plus/Minus buttons or the speed controller. This
resets the timer.
Pausing the timer function
The timer function can be “paused” at any time.
- Press the Start/Pause button to “pause” the time. The icon starts to flash.
- To reactivate the timer function, press the Start/Pause button. The icon stops flashing.
Timer function and automatic switch-off
When using the timer function together with the automatic switch-off, the appliance stops automatically when the preset time has elapsed.
- Set the desired time as described in the “Timer function” section.
- Start the timer function by selecting a speed setting on the speed controller.
(Fig. G) The LED ring lights up white. The icon appears on the display and the remaining time is shown.
Note: The timer does not work with the “Pulse” function.
Note: The time can also be changed when the timer is activated, by
pressing the Plus/Minus buttons.
- Once the time has elapsed, the appliance beeps and switches off automatically. The LED ring on the speed controller fl ashes until you turn it to the Off position (0).
Note: Hold the Start/Pause button pressed down for at least three seconds to reset the timer. “00” appears on the display.
Splash guard (9)
-
The splash guard (9) prevents splashing during mixing. The filler opening on the splash guard (9) can also be used to add further ingredients directly while mixing.
-
Press the release button to tilt the mixer arm upwards.
Note: The mixer accessories (fl at beater, dough hook, and whisk) must be removed before inserting the splash guard (9). -
Insert the splash guard (9) into the mixer arm holder from underneath with the filler opening facing upwards.
-
Turn the splash guard (9) in a clockwise direction until it locks into place.
Note: The splash guard (9) can be used in three different positions (Figs. H-J). -
Push the required mixer accessory (flat beater, kneading hook, or whisk) into the attachment as far as it will go and rotate it anticlockwise until it locks into place.
-
Lower the mixer arm.
-
The splash guard (9) does not need to be removed to detach the mixer accessories.
-
To remove the splash guard (9), set the speed controller to the Off position (0) and lift the mixer arm. Turn the splash guard (9) in an anticlockwise direction and pull it downwards.
Fitting the mixer attachment (2)
Use
The device is suitable for mixing and chopping foods such as fruits,
vegetables, and nuts as well as for preparing juices, smoothies, and shakes.
After mixing/blending the mixing container can be used as a drinking bottle by
replacing the blade unit with a drinking cap.
- Take care not to injure yourself on the sharp blade.
- Ensure that the mixer arm on the food processor is lowered into position.
- Ensure that all accessories (flat beater, dough hook, and whisk) have been removed before starting mixing.
- Note: The mixer function cannot be used at the same time as the appliance’s other functions (beating, etc.).
Getting started
Clean the device before use as described in the chapter entitled “Cleaning and care.”
-
Cut the desired ingredients into small pieces and place them in the mixing container.
Please note not to exceed the max filling quantity of 550ml. Always add at least 100ml of liquid (e.g. water, juice or milk) to ensure that you get a homogeneous mixture.
Tip: The light ingredients should always sit on the blade unit. As the container is rotated to close it we recommend that you add the light ingredients to the container last of all. -
Now screw in the blade unit by twisting it clockwise onto the mixing container. Check that the blade unit is fastened firmly to the mixing container and forms a tight seal.
-
Remove the mixer attachment cover from the mixer arm on the food processor by turning the recessed grips anticlockwise (Fig. K). Stand the mixing container on the relevant recesses in the drive unit and turn the container in a clockwise direction until it locks into place.
Warning: The appliance only works if the mixing container is attached correctly. A safety shutdown prevents operation without the mixing container. -
Now plug the appliance into a mains socket.
-
Now select the function you want: Select the desired speed (1-8) on the speed controller and start the appliance. Start at a low speed and increase if necessary.
To use the pulse function, select PULSE on the speed controller. The motor operates at maximum speed while the speed controller is set to the pulse setting. The maximum runtime must not exceed one minute. -
As soon as the desired result has been achieved, switch the speed controller to the Off position (0).
Unplug the appliance from the main socket before removing the mixing container from the drive unit by turning the container in an anticlockwise direction.
Warning: risk of injury!! Always wait for the blades to come to a complete standstill before removing the lid. -
Turn the mixing container upside-down so that the blade unit is pointing upwards.
-
Turn the blade unit in an anticlockwise direction and remove it.
Caution! Never place the blade unit with the blades pointing downwards. This can damage the blades and scratch surfaces -
Place the cover of the mixer attachment back on the mixer arm of the food processor and turn the recessed grips clockwise (Fig. M).
-
You can now pour out your smoothie, juice, or shake. Alternatively, you can also use the mixing container as a bottle. For this, you must screw the drinking lid onto the mixing container.
Examples| Speed| Maximum
mixing time| Maximum filling
quantity
---|---|---|---
Cocktails| Low (min.)| 40-60 secs.| 500m1
Soft fruit (e.g. bananas, apricots)| Low (min.)| 30-60 secs.| 250g
Milkshakes/smoothies with soft fruit| Low (min.)| 30-60 secs.| 250g fruit +
150m1 milk/juice
Soups, sauces| Medium| 30-60 secs.| 500m1
Milkshakes/smoothies with harder fruits| Medium| 40-60 secs.| 250g fruit +
150m1 milk/juice
Milkshakes/smoothies with frozen fruit, green smoothies| High (max.)| 40-60
secs.| 250g fruit + 150m1 milk/juice
The recommended mixing times are only guidelines. They may vary depending on
the quantity used.
Holder for optional accessories
Optionally available accessories can be connected to the front of the
appliance (Fig. N). To do so, press on the left upper corner of the cover for
accessories (4) and remove it. You can now connect individual accessories in
accordance with the user manual.
Replace the accessory cover (4) by placing it in the center of the connector
for optional accessories and lightly pressing on it to lock it into place.
Warning: Optional accessories must not be used at the same time as the
food processor’s other functions (whisk or mix function).
When using an optional accessory, ensure that the mixer attachment, whisk,
dough hook, flat beater mixing bowl, and splash guard (9) are not fitted.
General information
- The appliance is equipped with a safety function. It will start only if the mixer arm is lowered into position correctly and the cover for the mixer attachment (1) and accessories (4) is in place.
- If the mixer arm is folded backward during operation or the cover for the mixer attachment (1) and accessories (4) is removed, the appliance stops. To restart the appliance, you must lower the mixer arm back into position and turn the speed controller to the Off position (0). You can then select the required speed/function again and the appliance will start automatically.
- When using the mixer attachment or optional accessories, the mixing accessory holder moves in unison.
Overload protection
The appliance is fitted with an overload protector. This prevents the motor
being damaged by overloading. If the appliance switches off during operation,
proceed as follows:
- Set the speed controller to the Off position (0), pull out the mains plug and allow the appliance to cool down for approx. 20-30 minutes.
- Once the appliance has cooled down, insert the mains plug into the socket again and continue with processing.
Cleaning and care
-
Turn the speed controller (10) to the Off position (0) and remove the plug from the mains supply.
Do not immerse the appliance in water, but rather clean it using a damp cloth with a little washing-up liquid and then dry it. -
Do not use harsh or abrasive cleaning agents.
-
The splash guard (9) may be rinsed under running water.
-
For easy cleaning, the mixing bowl (8) may also be washed in the dishwasher.
-
For ease of cleaning mixing jug, drinking lid, and blade unit can be put in the dishwasher.
-
The silicon seals of the drinking caps can be removed for cleaning. However, before reassembling, check whether the seal has been reinserted correctly. If not, the mixing container may leak.
For UK use only
-
This product is supplied with a 13 A plug conforming to BS 1363 fitted to the mains lead. If the plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the plug is a non-rewireable one, cut it from the mains lead and immediately dispose of it. Never insert it into a socket outlet as there is a very great risk of an electric shock.
-
The replacement of the plug at the mains lead has to be done according to the following instructions:
Important: The wires in this mains lead are colored in accordance with the following code: blue Neutral Brown Live As the colors of the wires in the mains lead of this appliance may not correspond with the colored markings identifying the terminals in your plug, proceed as follows:
⋅ the wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black,
⋅ the wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.
Do not connect any wire to the terminal which is marked with the letter or by the earth symbol, or colored green or green and yellow. -
If a 13 A (BS 1363) plug is used it must be fitted with a 13 A fuse conforming to BS 1362 and be ASTA-approved. If any other type of plug is used, the appliance must be protected by a 10 A fuse either in the plug or adapter or at the distribution board.
If in doubt – consult a qualified electrician. -
Never use the plug without closing the fuse cover.
The appliance complies with European directives.
At the end of its life, this product may not be disposed of in normal
household waste, but must instead be taken to a collection point for recycling
electrical and electronic appliances.
The materials are recyclable in accordance with their labeling. Reuse,
recycling, and other ways of reutilizing old appliances make an important
contribution to protecting our environment.
Please ask your local authorities for information about the appropriate
disposal point.
End users are personally responsible for deleting any personal data that may
be stored on appliances they are disposing of.
Subject to change.
Consumer Service:
Tel.: +49 (0)7331 256 256
E-Mail: contact-de@wmf.com
Hersteller:
WMF GmbH
WMF Platz 1
73312 Geislingen/ Steige
Germany
wmf.com
Änderungen vorbehalten – IB-1668 00XX-03-2201
Type: 04 1668 0001
04 1668 0071