EPSON Magnetic Window Cleaner Instructions
- June 3, 2024
- Epson
Table of Contents
EPSON Magnetic Window Cleaner
Instructions
- Open the window, put finger into the tach, one side of the cleaner attached to a rope should be outside the window while the other side should be inside the window.
- Close the window, washing the glass from right to left, wipe to the top of window. The safe rope which is outside the window should be long enough.
- Wipe the top, bottom, left and right border of the window, do not let the cleaner run into the border or come. If it feels rough or difficult to move the tool, you can add a little water or detergent.
- The following diagram illustrates the improper operating procedure. You should wipe right to left, not left to right, but you can scrape the water off in this way.
- Slide the tool to the corner, scrape and turn the tool into the corner. Scrape off the water on the left border.
- Turn and scrape off the water. Scrape and turn the tool against the border. Scrape off the water on the right border.
- Scrape and turn the tool against the border. Scrape and tum it against the other border. The foam will be below the tool.
- Move horizontally, turn and scrape off the water at once and open the window. Remove the tool and wipe up the remaining water.
Notes
- Please do not use this product on cracked glass
- Tie the safety string on your free hand before cleaning.
- Make sure there is no impurity on the cleaner before using, otherwise the glass wi II be damaged.
- Please wash the cleaner thoroughly after cleaning dirty glasses.
- Keep it out from sun light for extending the using-life of this cleaner.
- Please keep it away from TV, watch, magnetic card, etc.
- Please do not press to interlace the two rubber strips when you keep it.
- Range of application: Glass thickness<=6mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>