TANNOY Portable Mini Bluetooth Loudspeaker Advanced Acoustics User Guide
- June 7, 2024
- TANNOY
Table of Contents
TANNOY Portable Mini Bluetooth Loudspeaker Advanced Acoustics User Guide
Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel. Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution
To reduce the risk of fi re or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments/ accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.- Unplug this app aratus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/ EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.- Do not install in a confined space, such as a book case or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
- Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
- Use this apparatus in tropical and/or moderate climates.
LEGAL DISCLAIMER
MUSIC Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding MUSIC Tribe’s Limited Warranty, please see complete details online at music-group.com/warranty
LIVE MINI Hook-up
Step 1: Hook-Up
Power Connection direct to LIVE MINI
Power Connection using the LIVE MINI charging base (recommended)
Bluetooth Connection to LIVE MINI
Auxiliary Connection to LIVE MINI
LIVE MINI Controls
Step 2: Controls
Top Panel Controls
-
Previous – this button is used for playing the previous song in the play list.
-
Microphone Aperture– below this small hole is the element for the internal microphone.
This microphone is used for phone calls and voice interaction with your mobile devices. Keep this area clean and dry, and do not cover, or the microphone response will be degraded. -
Next – this button is used for playing the next song in the play list.
-
Power ON/Battery Indicator
When the power adapter is not inserted or powered on:
This LED turns ON for 10 seconds after the LIVE MINI Power button is pressed. (Press the Power button momentarily and the LED will turn on again for 3 seconds.) The LED color will show the battery status as follows:
Green: Battery charge > 50%
Yellow: Battery charge is between 20% and 50%
Red: Battery charge is low
When the power adapter is inserted and powered on:
The LED color will show the charging progress as follows:
Green (solid): Battery is fully charged
Yellow (flashing slowly): Charging progress is above half way
Red (flashing slowly): Charging progress is below half way -
Power Button – press this button once to turn the LIVE MINI on.
Press the button for about 1 second to turn off the LIVE MINI. -
– Button – this button is used for various operations, including Volume Down.
-
Multi-Function Button – this MFB button is used in various operations of the LIVE MINI, including Pause and Play.
-
+ Button – this button is used for various operations, including Volume UP.
-
Aux Input Indicator – this indicates that the LIVE MINI is connected to an auxilliary device such as an MP3 player, via the rear panel 3.5 mm TRS Aux connector.
-
Bluetooth Button– this button is used in various operations such as Bluetooth pairing to compatible devices.
See the Getting Started section of this manual for details of setting up the Bluetooth connection. -
Bluetooth Indicator – this indicates the status of the bluetooth connection.
Rear Panel Connectors -
Aux Input – this 3.5 mm TRS connector accepts line-level stereo input signals from external devices such as MP3 players or computer audio outputs.
LIVE MINI Getting started
Step 3: Getting started
OVERVIEW
This Getting Started guide will help you set up the LIVE MINI and briefl y
introduce its capabilities. The LIVE MINI contains 2 premium transducers and a
unique bass radiator design that allows for excellent true stereo music
reproduction wherever you go. The Bluetooth connectivity and 3.5 mm auxilliary
input allow a wide variety of connection options.
POWER CONNECTIONS
Before using the LIVE MINI for the very first time, we recommend that you make
sure it is fully charged first.
Use the supplied power adapter only, and connect it either directly to the
rear power connector on the LIVE MINI, or the charging base.
Make sure the charging base is placed on a clean, dry, and fl at horizontal
surface, and that the LIVE MINI is correctly fi tted into the base.
When charging the LIVE MINI, the Power LED will show the charge status. When
the LIVE MINI is fully charged, the Power LED will show a steady green.
Do not leave the LIVE MINI unattended during charging.
Turn off the power to the supplied power adapter when the LIVE MINI is
charged.
Please note that the battery is not user-replaceable. it can be replaced by an
authorised repair center.
Battery Notes
The LIVE MINI internal battery type is Li-ion. To maximise the battery life,
we recommend that you do not run the battery down to a very low charge. Keep
it out of the “battery low” charge range (red POWER LED) as much as possible.
It is better to recharge the battery from a medium charge (even if you have to
charge it more often).
There is no need to fully discharge the battery at any time.
The playing time will vary depending upon the volume and type of music
program. The louder the music, and the more bass content, then the less
battery time is available.
Operation of the LIVE MINI at high temperatures will also affect battery life.
Do not place the LIVE MINI near to radiators, fireplaces, heaters, or other
sources of heat, such as power amplifiers. Do not place the LIVE MINI in
direct sunlight during high daytime temperatures.
When the LIVE MINI is not going to be used for a long time, such as storage,
make sure it is charged first.
Unplug the external power adapter from the AC Mains when the LIVE MINI is not
in its charging base.
Operations Table
Function Name
|
Status
|
Operation
|
Remark
|
LED Status
---|---|---|---|---
Turn On
|
Of
|
Press and hold the POWER button until the Power LED lights up
|
LIVE MINI will start to connect to the last used device, if the device list is not empty. Otherwise it will enter pairing mode.
|
Power LED ON for 10 seconds (when not on the charger). The LED color shows battery charge status: Green: >50% Yellow: between 20% and 50% Red: Battery Low
Turn Of
|
On
|
Press and hold the POWER button until the Power LED turns red and then of
| |
Power LED Of
Show battery status
|
On
|
Press the POWER button
|
Power LED turns on for 3 seconds
|
Power LED color shows the charge status as above.
Bluetooth mode (BT=Bluetooth, MFB=Multi-Function Button)
Enter pairing
|
On, but not in call-active state
|
Hold BT button for 3 seconds
|
LIVE MINI is ready for pairing and connecting. This expires in 5 minutes.
|
BT LED fl ashes blue slowly
Manual Connection Request
|
Idle state
|
Press MFB button
|
LIVE MINI starts to connect to the last used device.
|
No change
BT connection established
| | | |
BT LED On steady
Volume Up
|
Music playing or a call is active
|
Press ‘+’ button
| |
BT LED fl ashes once
Volume Down
| Music playing or a call is active| Press ‘-‘ button| | BT LED fl ashes once
Three way call
|
Status
|
Operation
|
Remark
|
LED Status
Release all held
|
Call on hold/ waiting
|
Press MFB+BT buttons
| |
No change
Add held to 3 way
|
Call on hold/ waiting
|
Double press MFB+BT buttons
| |
No change
Reset Bluetooth paired device list
Reset BT paired device list
|
Idle state
|
Hold ‘+’ & ‘-‘ together for 5 seconds
| |
BT LED flashes several times
AUX mode
Volume up
|
AUX mode
|
Press ‘+’ button
| |
AUX LED fl ashes once
Volume down
|
AUX mode
|
Press ‘-‘ button
| |
AUX LED fl ashes once
Volume maximum/ minimum
|
AUX mode
|
‘+’ / ‘-
|
Press and hold the + or – buttons to keep increasing or decreasing volume
|
AUX LED fl ashes twice
Mute/unmute
|
AUX mode
|
Press MFB
| |
AUX LED fl ashes once
Switch BT mode
|
AUX mode
|
Press BT button or Unplug the 3.5mm jack
| |
Change to BT led
Switch AUX mode
|
BT mode
|
Plug in 3.5mm jack
| |
AUX LED ON
Battery Status
Full charged
|
Any state
|
Plug in charger
| |
POWER LED Green steady
50% full
|
Any state
|
Plug in charger
| |
POWER LED slowly flashing Yellow
< 50% full
|
Any state
|
Plug in charger
| |
POWER LED slowly flashing Red
Other important information
-
Register online.
Please register your new MUSIC Tribe equipment right after you purchase it by visiting behringer. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently.
Also, read the terms and conditions of our warranty, if applicable. -
Malfunction.
Should your MUSIC Tribe Authorized Reseller not be located in your vicinity, you may contact the MUSIC Tribe Authorized Fulfi ller for your country listed under “Support” at behringer. com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer. com. Alternatively, please submit an online warranty claim at behringer. com BEFORE returning the product. -
Power Connections.
Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type and rating without exception.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: MUSIC Tribe Commercial NV Inc.
Address: 5270 Procyon Street Las Vegas, NV 89118 USA
Phone Number: +1 702 800 8290
LIVE MINI
complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit diff erent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Caution!
The MUSIC Group is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment
FCC RF Radiation Exposure Statement:
(1) This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
(2) This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator and
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>