AVI-8 P-51 Mustang Jubilee Automatic Limited Edition AV-4087 Instruction Manual
- June 5, 2024
- AVI-8
Table of Contents
- AVI-8 P-51 Mustang Jubilee Automatic Limited Edition AV-4087
- AUTOMATIC WATCH
- WINDING THE MAINSPRING
- HOW TO SET THE TIME
- HOW TO SET THE DATE
- HOW TO CHANGE THE BRACELET TO LEATHER STRAP
- HOW TO USE A DEPLOYANT CLASP
- WATER RESISTANCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AVI-8 P-51 Mustang Jubilee Automatic Limited Edition AV-4087
AUTOMATIC WATCH
This timepiece is equipped with a self-winding Mechanical Automatic movement It does not need a battery. It is powered by the motions of the user’s own wrist during the wear of the watch. You may also choose to wind the watch manually. For more details on operating this timepiece please refer to the enclosed booklet or visit: AVI-8.CO.UK
Before you use this watch, it is recommended that you manually wind the mainspring to start it moving.This watch is an automatic watch equipped with a manual winding mechanism.
WINDING THE MAINSPRING
When it is in position [0], turn the crown clockwise to wind. Wind 5-10 times and it will start to move naturally after shaking slightly. This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound.
HOW TO SET THE TIME
- Pull the crown out to position [2]-(2nd click).
- Turn the crown clockwise to set the correct time.
- Push the crown in.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
HOW TO SET THE DATE
- Pull the crown out to position [1]-(1st click).
- Turn the crown anti-clockwise to set the correct date.
- Push the crown in.
Do not set the date between 9:00 P.M. and 4:00 A.M.
HOW TO CHANGE THE BRACELET TO LEATHER STRAP
HOW TO USE A DEPLOYANT CLASP
- Flip the cover.
- Press the buttons on the clasp sides.
WATER RESISTANCE
The water resistance indicated on your timepiece serves only as a guide.
Actual water resistance may vary depending on a number of important factors
including temperature, water salinity, and actual use under water.
The water resistance of your timepiece may eventually be compromised over time
with general wear and tear and the use of your watch under adverse conditions.
Always remember to employ the screw down crown (if available) to maintain the
water resistance of your timepiece. Warranty may be voided if the screw down
crown has not been properly employed. Note that you should NEVER wear your
watch in a jacuzzi, hot shower or steam room where steam may enter the case
despite the watertight seals used to protect your watch. The steam may cause
condensation inside your watch, which may affect and damage the inner workings
of your watch – which would also not be covered by the warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>