ELVITA CKS5185V Exterior Control Panel with Display Refrigerator User Manual

User manual
Refrigerator

CKS5185V, CKS5185X

Thank you

for your trust and the purchase of our product. This user manual is supplied to help you use this product. The instructions should allow you to learn about your new product as quickly as possible.

Make sure you have received an undamaged product. If you do find transport damage, please contact the seller from which you purchased the product, or the regional warehouse from which it was supplied.

Publication date: 2021-09-22
This document and its content, including written material and images, are the property of Elon Group AB. You may not copy, reproduce, modify, republish or distribute this document or any of its content without express written permission from Elon Group AB. © 2021, Elon Group AB. All rights reserved.

WARRANTY

Guarantee of quality for the consumer (does not include wear parts).

SAFETY AND WARNING INFORMATION

For your safety and correct usage before installing and using the appliance for the first time, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that everyone who uses the appliance is thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the appliance if it is moved or sold, so that anyone who uses it throughout its life will be properly informed about its usage and safety notices.
For the safety of life and property, follow the precautions given in these instructions, as the manufacturer is not responsible for damages caused by omission.

Safety for children and others who are vulnerable

• According to EN standard
  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised or instructed in how to use the appliance safely and understand the hazards involved. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

• According to IEC standard
  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been supervised or instructed in how to use the appliance safely by a person responsible for their safety.

• Keep all packaging away from children as there is risk of suffocation. If you are discarding the appliance, pull the plug out of the socket, cut the power cord (as close to the appliance as you can) and remove the door to prevent playing children from suffering an electric shock or from trapping themselves inside it.

• If this appliance will replace an older appliance that has a spring lock (latch) on the door or lid, make sure the spring lock is disabled before you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

• WARNING — This appliance is intended to be used in household and similar applications such as
  – staff kitchen areas in shops, offices and other working environments;
  – farm houses and by clients in hotels, motels and other residential environments;
  – bed and breakfast environments;
  – catering and similar non-retail applications.

• WARNING — Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. WARNING — If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service agent or similarly qualified persons in order to avoid a hazard.

• WARNING — Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction. WARNING — Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• WARNING — Do not damage the refrigerant circuit. WARNING — Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

• WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame.

• WARNING — When positioning the appliance, ensure the power cord is not trapped or damaged.

• WARNING — Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

Replacing the interior lights

• WARNING — The interior lights must not be replaced by the user! If an interior light is damaged, contact the customer helpline for assistance.

This warning is only for refrigerators that contain interior lights.

Refrigerant

The refrigerant circuit of the appliance contains isobutene (R600a), a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged. The refrigerant (R600a) is flammable.

WARNING — Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that the refrigerant circuit tubing is not damaged prior to proper disposal.

WARNING: Risk of fire / flammable materials

If the refrigerant circuit is damaged:
– Avoid opening flames and sources of ignition.
– Thoroughly ventilate the room in which the appliance is situated.

It is dangerous to alter the specifications or modify this product in any way. Any damage to the power cord may cause a short circuit, fire, and/or electric shock.

Electrical safety

1. The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.
3. Make sure that you can access the main plug of the appliance.
4. Do not pull the power cord.
5. If the power socket is loose, do not insert the plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the interior light cover in place.
7. The fridge should only be supplied with power from a single-phase alternating current supply of 220~240 V / 50 Hz. If local voltage fluctuations are so large that the voltage exceeds the above range, for reasons of safety you should install an automatic voltage regulator rated at more than 350W to supply the fridge. The fridge must have its own power socket; it must not share one with other electric appliances. Its plug must match the socket with ground wire.

Daily use

• This refrigerating appliance is not intended to be used as a built-in appliance. Do not store flammable gases or liquids in the appliance, otherwise there is a risk of an explosion.
• Do not operate any electrical appliances in the appliance (e.g. electric ice cream makers, mixers etc.).
• When unplugging always pull the plug from the power socket, do not pull on the power cord.
• Do not place hot items near the plastic components of this appliance.
• Do not place food products directly against the air outlet on the rear wall.
• Store pre-packed frozen food in accordance with the frozen food manufacturer’s instructions.
• The appliance manufacturer’s storage recommendations should be strictly adhered to. Refer to the relevant instructions for storage.
• Do not place the appliance in direct sunlight.
• Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.
• The appliance is intended for storing food and/or beverages for normal household use, as explained in this instruction booklet
• The appliance is heavy. Care should be taken when moving it.
• Never use the base, drawers, door etc. to stand on or as supports.
• To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.

Caution!
Care and cleaning

• Before maintenance, switch off the appliance and unplug it from the power socket.
• Do not clean the appliance with metal objects, steam cleaner, essential oils, organic solvents or abrasive cleansers.
• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper

Installation – important!

• Carefully follow the electrical installation instructions given in this manual. Unpack the appliance and check if it has been damaged in any way.
• Do not connect the appliance if it is damaged. Report any damage immediately to the place where you bought it. Retain the packaging for this purpose.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be provided around the appliance, otherwise the appliance may overheat. To achieve sufficient ventilation, follow the instructions relevant to installation.
• Wherever possible the back of the product should not be too close to a wall to avoid contact with warm parts (compressor, condenser). To prevent the risk of a fire, follow the instructions relevant to installation.
• The appliance must not be located close to radiators or cookers.
• Make sure that the plug is accessible after the appliance has been installed.

Service

Any electrical work required during servicing of the appliance should be carried out by a qualified electrician or competent person.
This product must be serviced by an authorized Service Centre, and only genuine spare parts must be used.

1. If the appliance is frost-free.
2. If the appliance has a freezer compartment.

Note: Children aged from 3 to 8 years are allowed to load and unload refrigerators. (This clause applies only to the EU region.)

INSTALLING YOUR NEW APPLIANCE

• Before using the appliance for the first time, you should take note of the following tips.
• • Ventilation of appliance
• To improve efficiency of the cooling system and save energy, it is important to maintain good ventilation around the appliance for the dissipation of heat. Sufficient clear space should therefore be provided around the refrigerator.
• Recommendation: It is advisable for there to be 50­-70 mm of space between the back of the appliance and the wall, at least 100 mm above the appliance, at least 50 mm between either side and the wall, and a clear space in front to allow the door to open 135º. As shown in the following diagrams.

Note:

• This appliance performs well within the climate class shown in the table below.
• It may not work properly if it is left at a temperature above or below the indicated range for a long period.

Climate class

| Ambient temperature
---|---
SN|

+10°C to +32°C

N

| +16°C to +32°C
ST|

+16°C to +38°C

T

|

+16°C to +43°C

• Place your appliance in a dry place to avoid high moisture.
• Keep the appliance out of direct sunlight, rain or frost.
  Stand the appliance away from heat sources such as stoves, fires or heaters.

Levelling appliance

• To level the appliance and ensure sufficient air circulation in the lower rear section of the appliance, the bottom feet may need to be adjusted. You can adjust them manually by hand or by using a suitable spanner.
• To allow the door to self-close, tilt the top backwards by about 10 mm.

Installing the door handle

For ease of transportation, the door handle is provided separately in a plastic bag. You can install the door handle as follows.

1. Prise off the screw covers on the right side of the door, and put them back in the plastic bag.
2. Position the handle on the right side of the door, keeping the holes in the handle aligned with the holes in the door, as illustrated
3. Fix the handle with the special screws provided in the plastic bag. Then install the handle covers.

Reversing the door

The side at which the door opens can be changed, from the left side (as supplied) to the right side, if the installation site requires.
Warning! When reversing the door, the appliance must not be connected to the mains. Ensure that the plug is removed from the power socket.
Tools you will need:

|
---|---
8 mm socket wrench| Cross-head screwdriver
|
Thin-bladed screwdriver|

8 mm spanner

Note: Before you start lay the refrigerator on its back in order to gain access to the base. You should rest it on soft foam packaging or similar material to avoid damaging the back of the refrigerator.
To reverse the door, the following steps are generally recommended.

1. Stand the refrigerator upright. Open the door and remove all the door racks (to avoid damaging the racks), then close the door.

2. Remove part (1) from the top of the refrigerator body on the left side, then remove parts (3) and part (4) from the door in the same way. Remove part (2) and put it back in the plastic bag.

1. Upper cover
2. Upper hinge cover (right)
3. Protective cover on top of door
4. Corner cover

3. Disconnect electrical connector (1) as well as electrical connector (2) and then remove part (3).

4. Remove the screws (1), disconnect the earth wire (2), and remove part (3).

1. Special flange self-tapping screws
2. Earth wire
3. Upper hinge part (right)

Note: Hold the door securely during step 4 to prevent the door dropping.

5. Remove the door and place it on a smooth surface with its panel upwards.
Prise off part (1) and part (4), then undo screws (2), as illustrated. Transfer the handle (3) to the right side, then install screws (2), part (1) and part (4) in turn. Undo screws (7), detach part (6) and part (5), turn part (6) over and then install part (5) and part (6) on the right side with screws (7).

(1) Handle covers
(2) Special self-tapping screws
(3) Handle
(4) Screw hole covers
(5) Door holder
(6) Stop block
(7) Self-tapping screws

Note 1: Remove the handle cover as illustrated below: Gently prise the wings on the handle cover outwards to release the lugs, then remove the handle cover.

Note 2: Install the handle cover as illustrated below: Engage the lug

on the inside of the handle cover in the recess, then press the cover towards the handle until you hear it click into place.

6. Lay the refrigerator flat, remove part (3) and then undo screws (4). Remove part (2) and part (1).

(1) Lower hinge part (left)
(2) Front foot fixed board
(3) Adjustable bottom foot
(4) Self-tapping screws
NOTE: washer may stick to the door.

7. Unscrew the lower hinge, transfer it to the other side, screw it in place and fit washer.

8. Referring back to step 6, transfer part (1) to the right side and part (2) to the left side and then fix them with screws (4). Finally install part (3).

1. Lower hinge part (left)

9. Exchange the wires in the left and right slots of refrigerator body.

10. Move the door to an appropriate position, adjust part (1) (which is in the plastic bag) and the door. Move the connecting wire (2) in the slot of the door from left to right, then fix part (1) and the wire (2) using screws (3). (Please hold the door securely when installing.)

1. Upper hinge part (left)

11 . Connect electrical connector (1) in accordance with step 3, then install part (2) (which is in the plastic bag).

(2) Upper hinge cover (left)

12. Reverse part (1) and install it on the left corner of the door, then mount part (2). (Both of which were removed in step 2)

13. Take the reed switch out of the mounting block (part (3) in step 3) and mount it on the block that is marked “L” in the plastic

bag. Put the mounting block that you just removed back in the plastic bag.

Note, make sure the reed switch fits the mounting block securely.

14. Install part (1), connect the wire connector (2), then install

part (3).

15. Open the door, refit the door racks and close the door.

DESCRIPTION OF THE APPLIANCE

View of the appliance

1. Cabinet
2. Top LED light
3. Glass shelf
4. Right LED light (optional)
5. Bottle rack
6. Small glass shelf
7. 0ºC cool plus
8. Crisper cover
9. Crisper box
10. Adjustable bottom feet
11. Egg rack (inside)
12. Upper shelf
13. Storage box (optional)
14. Handle
15. Lower rack
16. Bottle holder (inside)(optional)
17. Fridge door
18. Fridge gasket

Note: Due to the continuous refinement of our products, your refrigerator may appear slightly different to the appliance shown in this instruction manual, but its function and operation remain the same.

DISPLAY CONTROLS

Use your appliance as described in the instructions below. Your appliance has the functions and modes shown on the control panel, as illustrated below. When the appliance is powered on for the first time, the backlighting of the icons on the display is turned on. If no buttons have been pressed and the door is closed, the backlighting will turn off.

Controlling the temperature

For optimum food preservation.
We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4ºC. If you want to change the temperature, follow the instructions below.
Caution! When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside each compartment may vary from the temperature values displayed on the panel, depending on how much food you store and where you place it. Ambient temperature may also affect the actual temperature inside the appliance.
NOTE: A high temperature setting will accelerate food waste.

1. Temp.

In the unlocked state, press the “Temp.” button: the fridge zone indicator blinks, the fridge set temperature is reduced by 1ºC, and the fridge temperature is cyclically adjusted between 2ºC and 8ºC. If you don’t continue pressing the button for 10 seconds, the setting takes effect.

2. Super cool

Super cool mode lowers the temperature of the refrigerator quickly, allowing the food to cool faster and helping it to keep longer.

• In the unlocked state, press the “Super cool” button to enter super cool mode, the Super Cool icon lights up and the temperature is set to 2ºC.
• Super cool mode automatically exits after 3 hours.
• When super cool mode is on, you can switch it off by pressing the “Temp” button; the temperature setting will then revert to its previous setting.

3. Holiday mode

If you are going to be away for a long period of time, you can set the refrigerator to Holiday mode to save on electricity.

In the unlocked state, press the “Holiday” button to enter Holiday mode; the Holiday icon lights up and the temperature is set to 15ºC”.
Important! Do not store any food in the fridge during this time. When Holiday mode is on, you can switch it off by pressing the “Temp.” button. The refrigerator temperature will revert back to its previous setting.

4. Alarm

If there is an alarm, the “Alarm” icon will flash and there will be a buzzing sound.
In the unlocked state, you can press the “Alarm” button at this time to cancel the door alarm. The buzzer stops beeping, the alarm icon remains lit, and the display screen shows normal.
Door Alarm

• If the door is left open for more than 1 minute, the door alarm will sound, the display panel will show “dr” and the buzzer will sound 3 times every minute.
• If the door alarm time exceeds more then 10 minutes, the buzzer stops beeping, the alarm icon turns off and the display screen shows normal.
• To save energy, avoid opening the fridge for long periods of time. The door alarm can be cancelled by closing the door, the buzzer stops beeping, the alarm icon turns off, and the display screen shows normal.

5. Standby mode

• If you want to clean the appliance or stop using it, you can turn the appliance off by pressing the “Power” button.
• When the refrigerator is running and is unlocked, a long press on the “Power” button for 3 seconds will put the refrigerator in standby mode and the display will show 0F.
• Important note! Do not store food in the refrigerator when the refrigerator is turned off via the power button.
• When the refrigerator is in standby mode and unlocked, a long press on the “Power” button for 3 seconds will turn the refrigerator on and the display will show normally.

6. Child lock

When the child lock icon is lit, the refrigerator is locked, and the other buttons are disabled.

• Press and hold the “Child Lock” button for about 3 seconds, the refrigerator lock icon is off, and the child lock is released. At this time, you can set the mode and set the temperature, cancel the alarm, or enter standby mode.
• If no button is operated within about 20 seconds, the button will be locked automatically.
• If no button is operated within about 60 seconds, the display will be turned off and can be turned back on by tapping any button.

Note: The display control can only be used in the unlocked state.

USING YOUR APPLIANCE

Your appliance has the accessories shown in the “Description of the appliance”, and the instructions below explain how to use them correctly.

Door rack

• This is suitable for the storage of eggs, canned liquids, bottled drinks and packaged food, etc. Do not place too many heavy items in the racks.
• If you want to remove the racks to clean them, please take food out of the racks first.

Note: There are egg trays in the upper shelf and bottle holder in the lower shelf.

Shelf in refrigerator chamber

• There are shelves in the refrigerator chamber, which can be removed for cleaning.

Flexible wine rack

• This is intended for storing bottled wine or drinks, and it can be removed for cleaning.

0ºC cool plus

• The temperature in this compartment is about 2­-4ºC lower than in the refrigerator chamber.
• It is used to store fish, meat and other perishable food.

Crisper power

• This lets you control the temperature of the crisper and avoid loss of moisture from vegetables.

Moisture fresh crisper

• This is suitable for storing fruit and vegetables.

Bottle holder

• The bottle holder can be used for storing bottles. You can place it on the middle or lower door rack and slide it to the left or right as you prefer.

Installing refrigerators in pairs

• Your refrigerator can be installed with another refrigerator as a pair.
• It can be installed using the installation parts supplied, as shown below.

HELPFUL HINTS AND TIPS

Energy-saving tips

• We recommend that you follow the tips below to save energy.
• Try to avoid keeping the door open for long periods in order to conserve energy.
• Ensure the appliance is kept away from any sources of heat (direct sunlight, electric oven or cooker etc.).
• Do not set the temperature colder than necessary.
• Do not store warm food or evaporating liquid in the appliance.
• Place the appliance in a well ventilated, humidity-free room. Please refer to the section on Installing your new appliance.
• If the diagram shows the correct combination for the drawers, crisper and shelves, do not adjust the combination as this is designed to be the most energy-efficient configuration.

Hints for fresh food refrigeration

• Do not place hot food directly into the refrigerator, the internal temperature will increase resulting in the compressor having to work harder and consuming more energy.
• Do cover or wrap food, particularly if it has a strong flavour.
• Place food properly so that air can circulate freely around it.

Hints for refrigeration

• Meat (all types) wrap in polythene food wrap and place on the glass shelf above the vegetable drawer. Always follow food storage times and use by dates recommended by manufacturer.
• Cooked food, cold dishes, etc.: These should be covered and may be placed on any shelf.
• Fruit and vegetables: These should be stored in the special drawer provided.
• Butter and cheese: Should be wrapped in airtight foil or plastic film wrap.
• Milk bottles: Should have a lid and be stored in the door racks.

Switching off your appliance

If the appliance needs to be switched off for an extended period, the following steps should be taken prevent mould on the appliance.

1. Remove all food.
2. Unplug the appliance from the power socket.
3. Clean and dry the interior thoroughly.
4. Ensure that the door is wedged open slightly to allow air to circulate.

CLEANING AND CARE

For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly at least every two months. Caution! The appliance must be unplugged before cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the power socket.

Exterior cleaning

To maintain the good appearance of your appliance, you should clean it regularly.

• Wipe the digital panel and display panel with a clean, soft cloth.
• Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance.This helps ensure an even distribution of moisture to the surface.
• Clean the door, handle and cabinet surfaces with a mild detergent and then wipe dry with a soft cloth.

Caution!

• Don’t use sharp objects as they are likely to scratch the surface.
• Don’t use thinner, car detergent, chlorinated detergent, essential oils, abrasive cleansers or organic solvents such as benzene for cleaning. They may damage the surface of the appliance and may cause fire.

Interior cleaning

You should clean the interior of the appliance regularly. It will be easier to clean when food stocks are low.

• Wipe the inside of the fridge with a weak solution of bicarbonate of soda, and then rinse with warm water using a wrung-out sponge or cloth.

• Wipe completely dry before replacing the shelves and baskets. Thoroughly dry all surfaces and removable parts.
  Although this appliance automatically defrosts, a layer of frost may occur on the refrigerator’s interior walls if the door is opened frequently or kept open for too long. If the frost is too thick, choose a time when the supply of food stocks are low and proceed as follows:

• Remove existing food and accessory baskets, unplug the appliance from the power socket and leave the door open. Ventilate the room thoroughly to accelerate the thawing process.

Caution!

Don’t use sharp objects to remove frost from the refrigerator. Only after the interior is completely dry should the appliance be switched back on and plugged back into the power socket.

Door seal cleaning

Take care to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the appliance be powered on.

Replacing the LED light

Warning: The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance. For technicians: To replace the LED light, the below steps can be followed:

1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.

TROUBLESHOOTING

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below. You can carry out some easy checks according to this section before calling for service.
Warning! Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service engineer or the shop where you purchased the product.

Appliance is not working correctly

| Check whether the power cord is plugged into the power outlet properly.
Check whether the “Power’’ function is on by pressing the “power’’ button for 1 second.
Check the fuse or circuit breaker of your power supply, replace if necessary.
The ambient temperature is too low. Try setting the chamber temperature to a colder level to solve this problem.
It is normal that the refrigerator does not operate during the automatic defrost cycle, or for a short time after the appliance is switched on, to protect the compressor.

Odours from the compartments

| The interior may need to be cleaned.
Some food, containers or wrapping cause odours.

Noise from the appliance

| The sounds below are quite normal:

• Compressor running noises.
• Air movement noise from the small fan motor in the refrigerator compartment or other compartments.
• Gurgling sound similar to water boiling.
• Popping noise during automatic defrosting.
• Clicking noise before the compressor starts.

Other unusual noises are due to the reasons below and may require you to check and take action:

• The cabinet is not level.
• The back of the appliance touches the wall.
• Bottles or containers fallen or rolling.

The compressor runs continuously

| It is normal to frequently hear the sound of the compressor, it will need to run for longer under the following circumstances:

• Temperature is set colder than necessary
• Large quantity of warm food has recently been stored within the appliance.
• The temperature outside the appliance is too high.
• Doors are kept open too long or too often.
• After your installing the appliance or it has been switched off for a long time.

A layer of frost occurs in the compartment

| Check that the air outlets are not blocked by food and ensure food is placed within the appliance to allow sufficient ventilation. Ensure that door is fully closed. To remove the frost, please refer to cleaning and care chapter.

Temperature inside is too warm

| You may have left the door open for too long or too frequently; or the door is kept open by some obstacle; or the appliance is located with insufficient clearance at the sides, back and top.

Temperature inside is too cold

| Increase the temperature by following the “Display controls” chapter.

Doors can’t be closed easily

| Check whether the top of the refrigerator is tilted back by 10–15 mm to allow the door to self-close, or if something inside is preventing the door from closing.

Water drips on the floor

| The water pan (located at the rear bottom of the cabinet) may not be properly levelled, or the drain spout (located underneath the top of the compressor compartment) may not be properly positioned to direct water into this pan, or the water spout is blocked. You may need to pull the refrigerator away from the wall to check the pan and spout.

The light is not working

|

• The LED light may be damaged. Refer to Replacing LED lights in cleaning and care chapter.
• The control system has disabled the lights due to the door being kept open too long; close and reopen the door to reactivate the lights.

DISPOSAL OF THE APPLIANCE

It is prohibited to dispose of this appliance as household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance

1. Unplug the appliance from the power socket.
2. Cut off the power cord and discard it with the plug.
   Warning! Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that the refrigerant circuit tubing is not damaged prior to proper disposal.

Correct disposal of this product

This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate disposal of this product. For more detailed information about the recycling of this product, please contact your local council, your household waste disposal service, or the shop where you purchased the product.

To avoid contamination of food, please respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Regularly clean surfaces that can come in contact with food, and accessible drainage systems.
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drips on to other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream and making ice cubes.
• One-, two- and three-star compartments are not suitable for the freezing of fresh food.

dairy products, cakes, Drinks and other foods which are not suitable for freezing.
2| (*)-Freezer| ≤-18| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 3 months – nutrition values and taste deteriorate with time), suitable for frozen fresh food.
3| -Freezer| ≤-18| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 3 months – nutrition values and taste deteriorate with time). Not suitable for freezing fresh food.
4| *-Freezer| ≤-12| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 2 months – nutrition values and taste deteriorate with time). Not suitable for freezing fresh food.
5| -Freezer| ≤-6| Seafood (fish, shrimp, shellfish), freshwater aquatic products and meat products (recommended time is 1 month – nutrition values and taste deteriorate with time). Not suitable for freezing fresh food.
6| 0-star| -6~0| Fresh pork, beef, fish, chicken, some packaged processed foods, etc. (Recommended to eat within the same day, preferably not later than 3 days). Partially packed/wrapped or encapsulated processed foods (non- freezable foods)
7| Chill| -3~+3| Fresh/frozen pork, beef, chicken, freshwater aquatic products, etc. (7 days below 0°C; if stored above 0°C consumption is recommended on same day, and preferably within 2 days). Seafood (below 0°C for 15 days; storage above 0°C is not recommended).
8| Fresh Food| 0~+4| Fresh pork, beef, fish, chicken, cooked food, etc. (Recommended to eat within the same day, preferably no more than 3 days).
9| Wine| +5~+20| Red wine, white wine, sparkling wine etc.

Note: please store different foods according to the compartments or target storage temperature of your purchased products. If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the door open to prevent mould developing within the appliance.

Water dispenser cleaning (only applies to water dispenser products):

Clean water tanks if they have not been used for 48 h; flush the water system connected to a water supply if water has not been drawn for 5 days.
WARNING! Food needs to be packed in bags before putting into the refrigerator, and liquids need to be packed in bottles or capped containers to facilitate cleaning of the appliance.

© 2021, Elon Group AB. All rights reserved.

Elvita products are distributed and marketed by
Elon Group AB. Elon Group AB Bäcklundavägen 1 |
702 03 Örebro Sweden
ELON GROUP | +46(0)10-220 40 00 | ELONGROUP.SE
Support and service: ELVITA.SE

References

• Köksvaror, vitvaror och elektronik för hela hemmet - Elvita

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>