TOILETTREE 8000702 Water Resistant Nose and Ear Hair Trimmer with LED Light Instructions
- June 5, 2024
- TOILETTREE
Table of Contents
8000702 Water Resistant Nose and Ear Hair Trimmer with
LED Light
Instructions
Instructions for use Before operating this trimmer, please read these instructions completely.
CAUTION
- This trimmer is designed for cutting body hair; It is intended for personal use and not intended for commercial use.
- Maybe a danger to children and should be kept out of reach of children.
- This trimmer is designed to trim the nose and ear hairs. Do not attempt to use it for any other purpose.
Other potential risks of injury
- Never insert the trimmer deeper than 0.5cm into your ear or nose as you may injure your eardrum or the mucous membrane in your nose.
- Be sure the cutting head is firmly in place during use.
Caution – Damage to the trimmer
- When cleaning the trimmer, be sure that the battery cover is tightly closed.
- Never immerse the unit completely in water.
- Turn the trimmer off after each use and replace the protective cover.
- Always remove a dead battery from the trimmer immediately because It may leak and cause damage.
General description
Inserting the Batteries
The unit works with a 1.5V AA battery, it is recommended to use an alkaline battery.
- Turn the battery cover counterclockwise and remove it. The cover has a bayonet lock.
- Insert the battery with the plus (+) in the direction of the cutting head.
- Replace the battery cover and turn it clockwise until it locks into place.
How to use
-
Remove the protective cover.
-
To switch on the trimmer, slide the ON/OFF switch in the direction of the cutting head.
-
Trimming the nose hair:
Switch on the trimmer and guide it carefully to the front area of the nostrils. Remove hair through careful, circular movements of the trimmer. -
Trimming the ear hair:
Switch on the trimmer and guide it carefully into the outer parts of your ear. Guide the trimmer carefully along with areas where hair is seen on the ear. 
Cleaning
Clean the trimmer after each use.
– First, ensure that the battery cover is firmly closed.
– Clean the trimmer by holding it under running water, but do not fully
submerge it in water (fig. 4).
Cleaning the inner blade:
– Remove the black blade cover by griping and twisting counterclockwise (fig.
4).
– Turn the black blade cover upside down under running water to allow water to
rinse through (fig. 4). DO NOT remove the white inner blade from the cover.
– Reattach the blade cover by turning clockwise, then dry with a soft cloth.
*Hair can also be removed from the trimmer with the included brush.
Need help? Have a product question? Feedback?
Contact us:
Info@ToiletTreeProducts.com
or Toll-Free at 1-888-251-0985
View more great products at
www.ToiletTreeProducts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>