BROMIC FD4T0660H Hot And Ambient Food Displays Instruction Manual

BROMIC FD4T0660H Hot And Ambient Food Displays

Product Information

The Hot & Ambient Food Displays by Bromic Refrigeration are designed to provide confidence and control in displaying and storing food items. These displays come in various models with different capacities, dimensions, and features to suit different needs. The displays are made of stainless steel, ensuring durability and hygiene.

Hot Displays

Part Number| External Dimension (H x W x D)| Capacity (Litres)| Weight (kg)| Net Volume| Air Circulation| Temperature Range| Exterior Material| Interior Material| Internal Light Type| Door Type| Shelves Qty| Plug Type
---|---|---|---|---|---|---|---|---|---|---|---|---
FD4T0660H| 1360mm x 660mm x 740mm| 300 litres| 155 kg| 300 litres| Forced| Digital| Stainless Steel| Stainless Steel| LED| Hinged| 3+base| 10A

Ambient Displays:

Part Number| External Dimension (H x W x D)| Capacity (Litres)| Weight (kg)| Exterior Material| Interior Material| Internal Light Type| Door Type| Shelves Qty| Plug Type
---|---|---|---|---|---|---|---|---|---
FD4T0900A| 1360mm x 660mm x 740mm| 417 litres| 142 kg| Stainless Steel| Stainless Steel| Glass| N/A| 3+base| 10A

Product Usage Instructions

1. Installation:
   • Follow local electrical codes when installing the product.
2. Operation:
   • Familiarize yourself with the safety information in the manual.
   • Refer to the specific instructions provided for each model to operate the display effectively.
3. Product Loading and Storage:
   • Ensure that the food items are loaded and stored in accordance with food safety guidelines.
4. Troubleshooting:
   • If you encounter any issues with the product, refer to the troubleshooting section in the manual for possible solutions.
5. Optional Accessories:
   • Check the manual for optional accessories that can enhance the functionality of the displays.
6. Environmental & Disposal Notes:
   • Follow proper environmental and disposal guidelines when disposing of the product.
7. Warranty:
   • Refer to the warranty section in the manual for information on the product’s warranty coverage.

PREFIX

This manual contains important information about the installation, operation, and maintenance of Bromic Food Display units. Please pay close attention to the important safety information shown throughout this instruction manual. Any safety information will be accompanied by the following safety alert symbols:

DANGER, WARNING, IMPORTANT

• READ THIS MANUAL CAREFULLY before installing or servicing this product.
• Improper installation, operation, or maintenance can result in death, severe injury, or property damage.
• Improper installation, operation, or maintenance may also result in the warranty being voided.
• This appliance is intended for a 230-240 Volt power supply.
• Installation MUST be carried out by a licensed and authorized technician in accordance with local electrical codes.

IMPORTANT NOTES AND WARNINGS

• Read all instructions before installing or using this appliance
• Retain this manual for future reference
• Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury.
• Improper installation, adjustment, or alteration and failure to follow the warnings and instructions in this manual could result in severe personal injury, death, or property damage
• The manufacturer is not responsible for any damage that could happen from improper use. The manufacturer emphasizes that this appliance should be used in a responsible manner and that all procedures, warnings, and safety instructions contained in this booklet be followed strictly.
• Check the appliance for damage. Do not operate a damaged unit.
• Check for damage to the appliance regularly. If damage to the appliance is suspected, discontinue use immediately and contact the supplier or qualified person to repair it.
• This appliance is not intended for use by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Keep packaging material out of reach of children
• Children should be carefully supervised to ensure that they do not play with the appliance
• Do not attempt to alter the appliance in any manner.
• Please pay attention to the maximum load limit when filling the shelves.
• All work on electrical equipment must be carried out by a qualified and licensed technician only.
• Do not perform maintenance until the appliance has been turned off and power disconnected.
• Never detach any cover except where specifically instructed in this manual. Doing so might expose live electrical parts.
• Do not operate the appliance with panels, covers or guards removed.
• Keep the air intake and outlets free of obstructions.
• Do not use the appliance outdoors.
• If the supply cord becomes damaged, it must be replaced by an authorized service agent or similarly qualified person in order to avoid a hazard.
• If the appliance has not been used, or will not be used for a long period of time, disconnect the power supply.
• Ensure the appliance has adequate ventilation.

PRODUCT OVERVIEW

HOT DISPLAYS

 | FD4T0660H| FD4T0900H| FD4T1200H| FD4T1500H| FD4T1800H
---|---|---|---|---|---
Part Number|  | 3736312| 3736304| 3736305| 3736306| 3736307
 | Height, mm| 1360| 1360| 1360| 1360| 1360
External Dimension| Width, mm| 660| 900| 1200| 1500| 1800
 | Depth, mm| 740| 740| 740| 740| 740
Capacity| Litres| 300| 350| 470| 580| 700
Weight| kg| 155| 186| 204| 223| 242
Net Volume| Litres| 300| 417| 542| 686| 830
Air Circulation| Type| Forced| Forced| Forced| Forced| Forced
Range| 50°C to 70°C| 50°C to 70°C| 50°C to 70°C| 50°C to 70°C| 50°C to 70°C
 | Type| Digital| Digital| Digital| Digital| Digital
Exterior| Material| Stainless Steel| Stainless Steel| Stainless Steel| Stainless Steel| Stainless Steel
Interior| Material| Stainless Steel| Stainless Steel| Stainless Steel| Stainless Steel| Stainless Steel
 | Voltage, V| 240| 240| 240| 240| 240
 | Frequency, Hz| 50| 50| 50| 50| 50
 | Current, A| 4.7| 7.5| 9.9| 10| 15
 | Power, W| 1138| 1800| 2382| 2411| 3600
Internal Light| Type| LED| LED| LED| LED| LED
 | Colour| Warm White,| Warm White,| Warm White,| Warm White,| Warm White,
 | Temperature| 3000K| 3000K| 3000K| 3000K| 3000K
 | Solid/Glass| Glass| Glass| Glass| Glass| Glass
 | Type| Hinged| Sliding| Sliding| Sliding| Sliding
 | Self-Closing| No| No| No| No| No
 | Door Lock| No| No| No| No| No
Shelves| Qty| 3+base| 3+base| 3+base| 3+base| 3+base
 | Weight Limit, kg| 20| 20| 21| 23| 28
 | Adjustable| Height&angle| Height&angle| Height&angle| Height&angle| Height&angle
Plug| Rating| 10A| 10A| 10A| 10A| 10A

AMBIENT DISPLAYS

INSTALLATION

Locating the Cabinet
Ensure the following instructions are observed as this is vital for proper and trouble-free operation.

• Do not install the cabinet outdoors.
• Locate the appliance in a dry and well-ventilated place.
• The unit must be positioned on a level surface.
• Do not install in the vicinity of heating radiators or other heat sources.
• Do not install the appliance where it is exposed to direct sunlight.
• Keep the air intake and outlets free of obstructions (for Warm showcase only).

Power Supply

• The appliance must not be plugged into a multiple-outlet power board.
• The appliance is supplied with a flexible power cord fitted with a 3-pin plug.
• The socket used must be properly earthed and fuse/RCD protected.
• See the rating label inside the cabinet for supply voltage, frequency, and current draw.
• The power cable is rated 70°C. It is recommended that the cable should not come into contact with parts over 50°C.
• Do not turn off power before consulting the person responsible.
• Mark the power source clearly, so the cabinet is not unplugged or turned off accidentally.

Before Operating

• Remove all the packaging material before using the appliance.
• Start the appliance only if it has been installed as described.

OPERATION

Start-up

• Connect the appliance to the mains power supply and turn on the main switch (blue) by flipping it upward.
• Switch on the Heating (for Warm showcase) and Lighting switches, and check that the fan (for Warm showcase) and lighting are working correctly.
• The electronic controller will display the current cabinet temperature after the Heating switch is turned on (for Warm showcase).
• Make sure the unit is clear of obstructions on all sides, and the electrical cable is not touching the external surface of the appliance, as the surface can be hot during operation.

Setting the temperature (For Warm showcase)

1. Press the button for more than 3 seconds.
2. The value of the set point will be displayed and the ‘°C’ or ‘°F’ LED will start blinking.
3. Press or arrow key within 10 seconds to adjust the set point.
4. Press the key again or wait 10 seconds.

Handling (For Warm showcase)

• WARNING: Appropriate PPE (Personal Protective Equipment) must be worn when using the warm showcase cabinet. The high surface temperature inside the cabinet may cause severe injury.
• WARNING: Untrained personnel are not allowed to operate the cabinet due to safety risks related to high surface temperature.

PRODUCT LOADING AND STORAGE

IMPORTANT: Run the appliance for at least 1 hour before loading.
WARNING: Never store explosive substances such as aerosol cans with a flammable propellant inside the appliance.

Start-up

• Clean the interior surface with a soft cloth and warm water before loading.
• There are 2 water trays located at the base of the Warm showcase, fill the tray with water to help prevent food from getting dried during heating.
• Ensure there is free circulation of air between the products.
• Do not block the airways.
• Do not overstock the unit.
• Keep the door openings to a minimum.
• Some products are sensitive to ultraviolet (UV) light, please see storage guidelines from the manufacturer before removing them from packaging.
• The maximum recommended shelf load (for each shelf) is specified in section 3 (page 5) of this manual. Do not overstock.

MAINTENANCE

• WARNING: Disconnect the appliance from the power supply before performing any maintenance. Never unplug the appliance by pulling on the cord. Always grasp the plug firmly and pull straight out of the outlet.
• WARNING: Exposure to significant water ingress will void the warranty and cause potential safety issues. If the unit should be exposed to water, please contact the manufacturer immediately.
• IMPORTANT: Warranty may be void if there is no evidence of preventative maintenance performed on the appliance.

Cleaning the Cabinet

• Remove the products and transfer to a suitable location prior to cleaning the inside of the cabinet.
• Do not use any aggressive or abrasive cleaning agents.
• Never use a water hose or a high-pressure jet to clean.
• Do not use sharp or pointed objects for cleaning.
• Clean the inside and outside of the appliance with a clean damp cloth or with a neutral cleanser.
• Dry all surfaces with a dry cloth.

Lighting

• The Food Display Cabinet is fitted with three LED lights.

Step-by-step guide for changing LED light fixture in the Food Display unit
Here are the steps you need to take to start saving with the installation of an LED light fixture.

• Turn off the power: Before starting the process, make sure to turn off the power supply to the display unit. This will prevent any electrical accidents from occurring.
• Locate the LED light: The LED light will typically be located on the underside of the display shelf.
• Remove the old LED light: unplug the old LED from both ends. LED light is held in place by a clip as shown above. Remove the LED light from the clip.
• Check the specifications: Make sure to check the specifications of the LED light you are removing to ensure you replace it with the correct type of LED light.
• Install the new LED light: Once you have the correct replacement LED light, insert it into the clip or socket. Make sure it is securely in place. Plug the LED on both ends.
• Test the new LED light: Once the new LED light is installed, turn on the power supply to the display unit and test the new LED light to ensure it is functioning properly.

TROUBLESHOOTING

IMPORTANT: Repairs on the unit must be carried out by an authorized and licensed person only. Contact the manufacturer or an approved service agent for any repairs needed.

Symptom| Possible Cause(s)|
---|---|---
The unit does not turn on| A. No power supply| A.  Ensure the cabinet’s switch is on

B.   Try plugging the cabinet into different power sockets

C.  Check the power plug and cord for damage

Cabinet Temperature Too Low| A.  Incorrect controller set point

B.   Faulty heating element

C.  Other

| A.   Adjust set point temperature

B.    Contact Bromic Service for replacement

C.  Contact Bromic Service for diagnosis

The Cabinet Temperature is Too High| A. Incorrect controller set point| A. Adjust set point temperature
Odour inside cabinet| A.  Rotting odor inside cabinet

B.   Oil or smoky odor

| A.  Clean the cabinet

B.   Turn off the cabinet and contact Bromic service immediately

OPTIONAL ACCESSORIES

The food display cabinet is supplied with pre-installed shelving. Below can be used as optional alternative accessories.

Wired Shelves

• Wire shelves – unit is supplied with 3 glass shelves as default configuration, which can be replaced with wire shelves. Each shelf is a different length and requires two (2) wire shelf inserts. See below image.

HOT SHOWCASE|
---|---
 | FD4T0900H| FD4T1200H| FD4T1500H| FD4T1800H
Shelf Metal Wire Bottom ** Set of 2| Yes| Yes| Yes| Yes
Shelf Metal Wire Middle ** Set of 2| Yes| Yes| Yes| Yes
Shelf Metal Wire Top ** Set of 2| Yes| Yes| Yes| Yes
AMBIENT SHOWCASE
 |  | FD4T0900A| FD4T1200A| FD4T1500A| FD4T1800A
Shelf Metal Wire Bottom| Set of 2| Yes| Yes| Yes| Yes
Shelf Metal Wire Middle| Set of 2| Yes| Yes| Yes| Yes
Shelf Metal Wire Top**| Set of 2| Yes| Yes| Yes| Yes

ENVIRONMENTAL AND DISPOSAL NOTES

These refrigerated cabinets are designed to high standards of environmental protection and recycling convenience. Cyclopentane, an environmentally friendly foaming agent, has been used. Cyclopentane is distinguished by zero ozone depletion potential (ODP) and zero global warming potential (GWP). The refrigerant used and contained within a hermetically tight circuit is environmentally friendly does not contain chlorine and has zero ODP. The device must be disposed of in accordance with applicable regulations. The WEEE regulations must be observed. In the interest of preventing environmental nuisance and promoting re-use of the high-quality materials employed, used commercial refrigeration equipment must be collected for expert disposal and recycling. Therefore, observe the following disposal regulations:

• The cabinet must not be discarded with regular waste.
• The refrigeration circuit must not be damaged.
• Before disposal, make it unserviceable by disconnecting the power plug and cutting off the power cable.
• Consult your local authorities or authorized dealers for details of collection and disposal facilities.
• Children are often unable to recognize the dangers associated with commercial refrigeration equipment. Proper supervision must be maintained and children must be prevented from playing with discarded refrigerated cabinets.

WARRANTY

All Bromic products are manufactured to the highest quality standard and are supported by our Extra Care Service Warranty, including guarantees against any material or workmanship defects; guarantees that cannot be excluded under Australian Consumer Law. Warranty Terms vary across the range. Please ensure you are familiar with the Terms and Conditions that apply to the purchase of your Bromic product by referring to the Warranty Policy included with your purchased product. Alternatively, you can also download the Warranty Policy at https://bromicrefrigeration.com.au/extra-care-warranty.

HOW TO PLACE

HOW TO PLACE A SERVICE REQUEST

• Please call 1300 276 642 to place a warranty service request and let the operator know whether you need Priority A or B service. More information can be found below.
• Ensure you have the serial number of your product ready before contacting us.
• The serial number of your product can be found on a compliance plate located on the inside right and at the rear of your cabinet.

SERVICE REQUEST PRIORITY

• PRIORITY A SERVICE
  • When the unit is NOT performing its primary function such as cooling or heating, or presents an OH&S or food safety risk
• PRIORITY B SERVICE
  • When the unit is performing its primary function, and presents no OH&S or food safety risk. i.e. lights, gaskets. locks, door adjustment
• SERVICE CALL PLACED BEFORE MIDDAY
  • Priority A – Technician to attend site within 4 hours
  • Priority B – Technician to attend site within 8 business hours
• SERVICE CALL PLACED AFTER MIDDAY
  • Priority A – The technician attends the site before midday on the following business day
  • Priority B – Technician attends site before 4 pm on the following business day

MODELS

• 3736300, 3736301, 3736302, 3736303, 3736312
• 3736304, 3736305, 3736306, 3736307

Note: Bromic Refrigeration reserves the right to make changes to specifications, parts, components, and equipment without prior notification. This Installation, operation, and service manual may not be reproduced in any form without prior written consent from Bromic Refrigeration.

CONTACT

• BROMIC REFRIGERATION
• 10 Phiney Place, Ingleburn (Sydney)
• NSW 2565 Australia
• T. 1300 276 642
• For further product information
• bromicrefrigeration.com.au.
• 1300 276 642

References

• Bromic Refrigeration
• Warranty | Bromic Refrigeration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>