TOILETTREE PRODUCTS TTP-Scale-1 Digital Glass Bathroom Scale User Manual

TOILETTREE PRODUCTS TTP-Scale-1 Digital Glass Bathroom Scale User Manual

Safety Information

Your Scale and Its Environment

To ensure your safety as well as the service life of your scale, please avoid using the scale under the following circumstances:

• Slippery floor
• Stepping onto the scale with wet feet or handling the scale with wet hands
• Near a cell phone or microwave oven

Avoid storage in the following locations:

• Where there is water.
• Where the device may be exposed to extreme temperatures, humidity, moisture, direct sunlight, dust, or salt air.
• Where the scale may fall and break.

Efficient Use of Your Scale

To ensure the accuracy of measurement, please follow below instructions when you start measurement.

• Place the scale on a flat, hard surface. Soft surface such as carpet will affect the performance of the scale.
• The best body weight measurements are taken at least 2 hours after waking up or at least 2 hours after eating.
• For consistency, try to measure your body weight at the same time each day.

Overview

General Instructions

The Body Scale applies SENSE ON technology. Its not necessary to turn on or turn off the scale, just stand on the scale for measurement.

Device Components

Included:

1. Digital Glass Body Scale
2. One CR2032 Lithium Battery (3V each)
3. User Manual

LCD Display

Symbol

|

Description

---|---

Kg

| Kilogram
Ib|

Pound

St
Ib

|

Stone

Initial Start-Up

Insert the Battery

• This scale operates on one CR2032 battery (included). Open the battery cover on the back of the scale and remove the plastic strip before first use.

• Please insert the battery according to the polarity indications marked inside the compartment. The icons “8888” will be shown on the LCD.
  

• Close the battery door and wait until the digits “0.0” are shown on the LCD.
  

CAUTION

• When the symbol to’ appears, the device will power off soon.
• A new battery is needed at this point.
• If you do not intend to use the scale for a prolonged period of time or intend to store the scale away. it is advisable to remove the battery.
• Please keep the battery out of reach from small children as it may be swallowed and cause serious injury.

Start Measuring

Initializing Your Scale

1. Press the center of the scale and remove your foot.

2. “0.0” will be displayed.
   

3. The scale will switch off and is now ready for use.
   This Initializing process must be repeated if the scale is moved. At all other times step straight on the scale.

Select Measurement Unit

With batteries correctly installed, press “UNIT” button in the back of the scale to select measurement unit. The default measurement unit is “lb”. You may press “UNIT” button to choose among kilogram,stone and pound.

Data Management

Daily Measurement

• With SENSE ON technology, the scale will automatically switch on when you step onto it.
• Step onto the scale and stand still until the measurement is stable: The number on the LCD will blink twice when the weight is locked.
  

Troubleshooting

Error Prompt

Error

| Description|

Solution

---|---|---
| Overload. The device will power off.| Stop using this scale for measurement.

| Low Battery. The device will power off in a few seconds.| Replace with a new battery.

When Measuring……..

Problem

| Root Cause|

Solution

---|---|---
No display on LCD when the device powers on.| Battery not yet installed.| Install the battery
Dead battery| Replace with a new battery.
The device powers off automatically.| Low battery.| Replace with a new battery.

Specifications

150 ±0.5kg: 180 ±0.7kg;

Working Environment| Temperature: 50 F to 104 F             Humidity: 15%RH to 90% RH
Atmospheric pressure: 80kPa to 105kPa
Storage Environment| Temperature: -4 ° F to 131°F Humidity: s90% RH
Power Source| 3V (One CR2032 Lithium Battery)
Turn on Method| SENSE ON technology
Auto-OFF| The scale will turn off after about 10 seconds if there is no action.
Accessories|

1. One CR2032 Lithium Battery
2. User Manual

Mode of Operation| Continuous Operation
Software Version| AO

About the Accuracy of This Product

• This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer. Please refer to the above table for the descriptions on accuracy.
• This product is specifically designed for body weight measurement, it should NOT be used for weighing goods.

Maintenance

When carrying out usual maintenance, please ensure practice of the following Do’s and Don’ts:

• DO use a dry soft cloth to wipe the dust.
• DO use a wet soft cloth, dipped into water and wrung out, to wipe the dirt. Then use a dry soft cloth to dry up the device.
• DON’T wash the device with water or immerse it in water.
• DON’T use propellant, abrasive or other chemicals to wipe the dirt in avoidance of discolor or malfunction.
• DON’T disassemble this device. If you have any problems please contact ToiletTree Products.
  (Please refer to Wm rarity for contact information)

Warranty

• ToiletTree Products is proud to offer a limited lifetime guarantee for this scale.
• This warranty does NOT cover damages caused by misuse or abuse, including but not limited to:
• Failure caused by unauthorized repairs or modifications,
• Damage caused by shock or drop during transportation;
• Failure caused by improper operation inconsistent with the instructions stated in this user manual;
• Malfunction or damage from failure to provide the recommended maintenance;
• Damage caused by improper use of power supply.
• Should this device require maintenance, please contact ToiletTree Products at: Info@ToiletTreeProducts.com OR 888-251-0985

ToiletTree Products, Inc.
41 Orchard Street
Ramsey, NJ 07446
Tel: 888-251-0985

FCC Regulation

FCC User Guide Information

Radio Frequency Interface Requirements- FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
• Consult the dealer or an experienced radio / TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>