Outsunny 840-260V00 Polyester Cover Retractable Patio Awning Instruction Manual
- August 29, 2024
- Outsunny
Table of Contents
Outsunny 840-260V00 Polyester Cover Retractable Patio Awning
Specifications
- Model: IN231100475V01_GL_840
- Recommended Tools: A, B, C, D, E, F, G, H1, H2, J1, J2, J3, N, P, Q, S
- Version: 840-260V00_840-262V03_840-262V04
Product Usage Instructions
- Make sure you have all the recommended tools listed above before starting.
- Follow the assembly instructions provided in the manual to put together the product components.
- Once assembled, place the product in the desired location and ensure it is stable and secure.
- Refer to the user manual for specific instructions on how to operate the product safely and effectively.
FAQ
- Q: What should I do if I am missing one of the recommended tools?
- A: It is important to use all the recommended tools for proper assembly and operation. Contact customer support for assistance if a tool is missing.
- Q: Can the product be disassembled for storage or transport?
- A: Yes, the product can be disassembled following the reverse steps of the assembly process. Refer to the manual for guidance on disassembly.
- Q: How do I clean and maintain the product?
- A: Use a damp cloth to clean the product surface. Avoid using harsh chemicals. Regularly check for loose parts and tighten them as needed.
Tips: Please do not use it in bad weather to avoid damage.
Tools Recommended
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
PARTS
HARDWARE
Installation Instructions
NOTE: Please remove the circular protector caps on the end of each pole before assembling.
-
Roll the fabric in this direction
-
The installation height of the product should be adjusted according to the site used.
-
The length of the product is fixed and can’t be adjusted.
-
Turn the bottom knob to slightly adjust the pole height, and the adjustable height range is 0-3cm.
Done
- Loosen the knob on the bar (1), then turn the hand crank (2) to close the awning.
- Until bar(1) is vertical to the ground, tighten the knob.
CONTACT
US
If you have any questions, please contact our customer care center.
- Our contact details are below:
- 001-877-644-9366
- customerservice@aosom.com
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
- Our contact details are below:
- 0044-800-240-4004
- enquiries@mhstar.co.uk
- IMPORTER ADDRESS:
- MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden Lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Loading......