atomi AT1893 Multi-Device Qi Charging Tower User Manual
- June 5, 2024
- atomi
Table of Contents
atomi AT1893 Multi-Device Qi Charging Tower
Thank you for purchasing the Atomi Multi-Device Qi Charge Tower
Tame unruly charging wires on your desktop with this multi-port power station.
It efficiently charges almost every type of device with a built-in 15W Qi fast
charger, a 20W USB-C PD port, a USB-C port. four smart USB ports. and an AC
outlet. Use with your smartphone, tablet. laptop, earbuds. and more.
What’s Inside
Multi-Device Qi Charge Tower
Specifications
- CurrentTap Rating: 125V-. 60Hz, 10 A. 1250W Wireless Output: 15W
- USB Output: 5V= 2.4A (Each Port)
- USB and USB-C Total Output Current: 4A max
- USB-C Output: 5V= 2.4A
- PD Output: 5V= 3A. 9V=2.22A.12V467A
- Total Output: 55W max
Charging Your Devices
-
Plug into any nearby outlet.
-
Charge up to 6 USB devices
-
Place the device on the designated charging area of your Multi-Device Qi Charge Tower. Charging will begin on contact.
-
Plug in a device to the built-in AC power outlet.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the Multi-Device QI Charge Tower near water or expose it to rain or moisture.
- DO NOT use the Multi-Device QI Charge Tower near open flames, such as co ndles, heat sou roes, radiators and stoves.
- Only clean the Multi-Device Qi Charge Tower with a dry cloth.
- Caution: Risk of electric shook. Grounding continuity must be maintained.
- For oon neotlon to a power supply not In the U.S.A.. use an attachment plug adapter of the proper configuration for the poiver outlet. if needed.
- Please check prior use, if output voltage and current of the power supply is suitable for the product.
- Chi Id ren shou Id be supervised to ensure that they do not play with the appliance.
For questions orooncems. email us at info@atomiusa.com
Manufactured and marketed by Ataml Inc.
10 West 33rd St., New York, NY 10001 atoml”‘ Is a trademark al Atoml Ina.
Designed by Atomi in New York. Made in China
One-year llmlted “NOrrantyfrom the dateot purchase against defeats In material
and W()l”i<manshlp.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>