PECRON T6000 Portable Power Station User Manual

June 5, 2024
pecron

PECRON T6000 Portable Power Station User Manual

PORTABLE POWER STATION

  1. Product introduction:
    T6000/T3000 is a portable AC/DC power station with built-in lithium battery, which is designed with the safe lithium-ion battery and inverter technology. It’s very easy to carry and convenient offering power to electrical appliances with advantages of light weight, large capacity , high power and multiple functions; This item is always used in the field of emergency communication, power lines repair, medical facility,
    exploration and survey, military, fire rescue and somewhere is lack of power energy.
    The followings are its main functions:
  • 220V/50Hz or110V/60Hz pure-sine wave AC output
  • Battery capacity display
  • DC output 12V10A ,DC output 48V50
  •  High-power LED emergency floodlights for option
    Please read carefully the manual before using our product. And
    please save with the purchase voucher for future reference usage.

T3000/ T6000 Technical specification

Model T3000 T6000
AC Out Power 3000 W

Output voltage

| AC Pure-Sine Wave 110V/60Hz DC 12V10A 48V50A
Battery capacity| 2963Wh(51.8V57.2Ah)| 5657Wh(51.8V109.2Ah)
Battery type| Lithium battery
Charging time| 5~6H| 7~8H
Charging voltage

and current

|

DC58.8V 9A

|

DC58.8V13A

Protection

| Over-voltage,low-voltage,over temperature,overload,AC short circuit protection
Temp| 0℃~45℃(Charge),―20℃~45℃(Discharge)
Dimension(cm)| L58W46H25
Weight(kg)| 30| 43

2.Panel function description

Packed List
NO. Packed List Quantity
1 Charger and charging cable 1
2 Aviation plug 1
3 High-power LED emergency floodlights (Option) 1
4 User manual 1

Front Panel

Item Description
1 Support for high-power LED floodlights
2 Reset Button:When protecting, Please disconnect the load, turn off the AC

switch and DC switch, and then press and hold for 10 seconds to activate.
3| DC output switch
4| DC12V10A cigar socket
5| DC charging port:DC58. 8V, MAX20A (the charger cannot be greater than 20A)
6| Power indicator light
7| DC48V50A output port,and the voltage range of this port is 40V~58.8V
8| AC output switch
9| AC output port:110V60Hz

3. Operation Instructions

Please read the instructions carefully i n order to our power supply device correctly or it may cause damage due to incorrect use or inadequate understanding.

3.1 Support of the floodlights: This power station can offer power

supply with AC 220V(Custom 110V can be powered by AC 110v voltage) for two pieces of floodlights (optional)with 60W. The upport can be adjusted according to different heights since it’s made of
flexible aluminum holders; During using, first plug cable of the floodlight into socket and then turn on the switch, the light will work; And if you want turn off it, just need turn off the AC output or pull up the cable directly.

3.2 Resetting Key: When overload and short- circuit protection for

lithium battery worked, you should first active output by charging the device. Or you can press the resetting key to active it. But the precondition is that there is no load work and short circuit products
and overload protection are removed. At this situation,at this situation, just need to long press the key.

3.3 DC output switch: Press the switch, 12V DC output will work

from the cigar socket, at the same time, the blue light indicator for switch and battery capacity indicator are on. And the lights will be off after turning off the switch.This switch simultaneously controls the output of the DC 48V.

3.4 12V10A DC output for cigar socket:

The fluctuation range of voltage is ±1V; max current is 10A and the overload protection value is 15A.

3.5 DC charging port:

The diameter of DC charging port is aviation plug with 25mm, one pin is ‘+’, two pins are ‘-‘; Please use the original charger to charge for the equipment with voltage of 58.8V and max
current 20A. The standard charger is with 9A or 13A current. During charging ,the battery volume indicator will flash one by one and will go off when it’s fully charged.

3.6 Battery capacity indicator: showing the remaining battery volume.

There will be about 10% discrepancy for the accurate volume since it’s based on the voltage. Please charge the device when the first indicator(20%) is flashing. And the light will be turned on when you
open the AC/DC switch. And the lighted indicators are depended on the real volume of the battery.

3.7 48V50A DC output port:

This port is an aviation plug with 32mm;
The pin 1 and 3 are ‘+’, pin 2 and 4 are ‘-‘. This port is controlled by the
DC switch.The voltage range of DC output is 40V~58.8V.When you connect the load,Please connect well the aviation plug to the required cable first, and then plug into the opposite connector jacks. Please
connect the wire when the connector is disconnected.The output port can not be used as a charging port.

3.8 AC output switch:

Press the switch, 110V AC output will start to work and blue switch indicator will light, same as the batteryindicator;
When you turn off of the switch, both indicator will be off and AC output stops to work.

3.9 AC output socket:

The output wave is pure-sina wave. The power of AC output means the total power of two output plugs. These two plugs are cascade, so the output are same.

4.Notice About the Function Work Environment

Dry Prohibited  water or other liquids
Shady Charging: 0~ 45℃; Discharging:- 20~ 45℃
Ventilation At least 20 cm space around the power pack to prove dissipation
Safty Avoid petrol, gas and other flammable and corrosive gas environments

Power charging:

Please pay attention the power unit when it’s charging.Please disconnect the charger and stop charging when the T3000/T6000 is fully charged.
Please charge the power unit every six months after no use for a long time. AC Load:
The power consumption of some machine is often greater than its nominal power when start, such as inductive load device, then it will exceed the max power of the power pack, so it will power off.

5. Warranty service

This product is warranted for a period 12 months, from the original date of purchase. This warranty is only valid when accompanied by the original invoice or sales receipt.
The warranty does not cover any of the following actions:

  • Unauthorised opening of the device
  • Improper package during transport
  • Improper handling, use of force or exposing to inaccurate environmental conditions
  • Improper storage
  • Misuse or ignorance of the instructions in the manual
  • Normal wear or tear

6.Guarantee Card

Dear User:
Please read carefully this manual before using our product. And please save with the purchase voucher for future guarantee.

User Name|  | Contact Name|
---|---|---|---
Customer Phone|  | Purchase Date|

Product Mode

|  | Invoice Number|
Factory Serial Nu mber|  | Purchase Store|
Customer Address|

Maintenance Record

| Date| Cause and treatment of trouble
 |
 |
 |

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals