Pecron E2000LFP User Manual: LCD Display, Charging Ports, AC Output

The Pecron E2000LFP Expandable Portable Power Station is a high-quality power source that can be used to power most devices with power consumption less than 2000 watts. This user manual provides detailed instructions on how to use the device, including information on its LCD display, charging ports, and AC output. The manual also includes specifications for the output and input specs, as well as information on how to use the E2000 LFP’s LCD smart display and expandable battery. Additionally, the manual provides information on how to recharge the device and how to use solar panels to charge it. The FAQ section answers common questions about the device, such as what kind of battery is used, what devices it can power, and whether it can be used as a UPS. The manual also includes important safety warnings and instructions on how to dispose of the battery properly. For further assistance or information, customers can contact Pecron’s customer support team at support@pecron.com or visit their website at www.pecron.com.

 **pecron E2000LFP Expandable Portable**
**Power Station User Manual**

support@pecron.com

FUNCTION INTRODUCTION

1. LCD Display
2. DC 12V~18V Charging Port
3. DC 32V~95V Charging Port
4. AC 100V~120V Output
5. DC 12V/USB/ Wireless Switch
6. AC 100V~120V Switch
7. DC12V Auxiliary Output
8. DC12V(5525)Output
9. USB-A/USB-C Ports
10. Wireless Charger
11. Battery Expansion Port

SPECIFICATIONS

OUTPUT SPECS

INPUT SPECS

HOW TO USE THE E2000 LFP

LCD SMART DISPLAY

EXPANDABLE BATTERY

PACKING LIST

RECHARGE TIME

• Includes one AC charger,extra one can be purchased on our website if needed.

SOLAR CHARGE TIME

USING SOLAR PANELS TO CHARGE THE E2000 LFP

1. x DC5521 Charging Port: PV/DC 12V~18V, 100W maximum; VOC(open circuit voltage) of solar panel must be than 25V;
2. 2x GX16MF-5 Charging Port: PV(operating voltage) range 32V~95V, 600W maximum; VOC(open circuit voltage) of solar panel/array must be than 95V, otherwise, it will damage the unit! Do not wire more than two 36V(AKA 24V) solar panels in series, or more than four 18V(AKA 12V) solar panels in series. (18V/36V stands for Vmp, the operating voltage, of the solar panel)
3. If you have any questions, Please feel free to contact us：support@pecron.com

SPECIFICATIONS

DC Output: 192W Max
Input Specs| AC Input: 100-240V 50/60Hz 10A Max
DC Input: 12V-30V 10A Max
How to Use the E2000 LFP| N/A
LCD Smart Display| N/A
Expandable Battery| N/A
Packing List| N/A
Recharge Time| 8 hours with included AC charger
Solar Charge Time| Depends on solar panel specifications
Using Solar Panels to Charge the E2000 LFP| DC5521 Charging Port: PV/DC 12V~18V, 100W maximum; VOC(open circuit voltage) of solar panel must be than 25V;
2x GX16MF-5 Charging Port: PV(operating voltage) range 32V~95V, 600W maximum; VOC(open circuit voltage) of solar panel/array must be than 95V, otherwise, it will damage the unit! Do not wire more than two 36V(AKA 24V) solar panels in series, or more than four 18V(AKA 12V) solar panels in series. (18V/36V stands for Vmp, the operating voltage, of the solar panel)
FAQs| Q1: What kind of battery is used in E2000 LFP? How long it can last?
A1: E2000 LFP utilizes high quality UL certified automotive LiFePO4 battery, it can retain 80% of its original capacity at 3500 complete charge cycles.
Q2: What devices can E2000 LFP power?
A2: E2000 LFP can power most devices with power consumption less than 2000 watts.
Q3: Can the E2000 LFP be used as UPS?
A3: The UPS function is not supported.
Q4: Can the E2000 LFP be charged while discharging?
A4: Yes, E2000 LFP can run devices while it is being charged. The battery will eventually run out if the discharging is greater than the charging during the pass through charging.
Q5: How to calculate the E2000 LFP running time?
A5: Running Time=Total Capacity(1920Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q6: Can I use the E2000 LFP indoors and charge the E2000 LFP indoors?
A6: Yes, the E2000 LFP is safe to use indoors.
Q7: Does E2000 LFP have built-in MPPT controller?
A7: Yes, there are two independent 600W(PV 32V-95V) MPPT charge controllers inside, and one step up 100W(PV 18V) MPPT charge controller, The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.
Q8: How to store the E2000 LFP?
A8: Please turn off the unit and then store it in a dry, ventilated place at normal room temperature. Do not place this unit near water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to 30% every three months and recharge it to 60% to prolong the battery life.
Disclaimer| N/A
Warning| Various warnings and instructions provided in the user manual. Please refer to the manual for details.
Disposal| Various instructions provided in the user manual. Please refer to the manual for details.
Exclusions| Pecron’s warranty does not apply to misuse, abuse, modification, damage by accident, or use for anything other than normal consumer use as authorized in Pecron’s current product literature.
Customer Support| support@pecron.com
Website| www.pecron.com
Pecron LLC| N/A

FAQS

Q1： What kind of battery is used in E2000 LFP? How long it can last?
A： E2000 LFP utilizes high quality UL certified automotive LiFePO4 battery, it can retain 80% of its original capacity at 3500 complete charge cycles.
Q2： What devices can E2000 LFP power?
A： E2000 LFP can power most devices with power consumption less than 2000 watts.
Q3： Can the E2000 LFP be used as UPS?
A： The UPS function is not supported.
Q4： Can the E2000 LFP be charged while discharging?
A： Yes, E2000 LFP can run devices while it is being charged. The battery will eventually run out if the discharging is greater than the charging during the pass through charging.
Q5： How to calculate the E2000 LFP running time?
A： Running Time=Total Capacity(1920Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q6： Can I use the E2000 LFP indoors and charge the E2000 LFP indoors?
A： Yes, the E2000 LFP is safe to use indoors.
Q7： Does E2000 LFP have built-in MPPT controller?
A： Yes, there are two independent 600W(PV 32V-95V) MPPT charge controllers inside, and one step up 100W(PV 18V) MPPT charge controller, The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.
Q8： How to store the E2000 LFP?
A： Please turn off the unit and then store it in a dry, ventilated place at normal room temperature. Do not place this unit near water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to 30% every three months and recharge it to 60% to prolong the battery life.

DISCLAIMER

Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future reference. Failure to follow the instructions for proper set up, use, and care for the device can increase the risk of serious personal injury, death, or property damage. Once you use this device, you are deemed to have understood, recognized and accepted all terms and contents of this document. The user shall be responsible for his own actions and all consequences arising from failure to use the device in accordance with the “User Manual”, or as authorized in Pecron’s current product literature. In compliance with laws and regulations, Pecron reserves all rights for final explanation, and to change these terms and conditions at any time without prior notice. In the event that any revisions are made, the revised terms and conditions shall be posted on our website immediately, please visit our website to inform yourself of any changes.

WARNING

1. Do not place the device near heat source, such as a fire or a heating furnace.
2. Do not immerse in any liquid, or expose the unit to rain or wet conditions.
3. Do not use the battery in a strong static electricity or electromagnetic environment.
4. Do not disassemble or puncture the product with sharp objects in any way.
5. Short circuits can be caused by: vermin or pests chewing through wires; water or other fluids coming into contact with electrical wiring.
6. Do not use accessories or parts other than those provided by Pecron. Please visit our website www.pecron.com or reach our support team for a complete list of accessories and parts.
7. When using this product, please strictly follow the ambient temperature for use in the user manual. If the temperature is too high, the battery can potentially result in self-combustion and will burst into flames, which can cause widespread damage. If the temperature is too low, the performance of the battery will be seriously degraded, and it may even fail to meet the normal use requirements.
8. Do not stack heavy objects on this product.
9. Do not block the air vents during use, or leave the device in a non-ventilated or dusty space.
10. Please avoid impacts, fall off, and violent vibration. Please turn off the device immediately and stop using it in the event of major exterior impact. Please fasten the unit firmly during transportation to avoid vibration and impact.
11. In the event of immersing the device into the water accidently, please place the unit in a safe open area and keep away from the unit until it is completely dry. The dried unit should not be reused and should be disposed of properly according to the local regulation. If the device catches fire, use the fire extinguishing equipment in the following recommended order: water or mist, sand, fire blanket, dry chemical, carbon dioxide fire extinguisher.
12. Please wipe it with a dry cloth to clean the surface of the device.
13. Please place this device with care to prevent the product from being damaged due to fall off. If the product is damaged due to fall off, please turn off the unit immediately and place it in an open area, keep away from combustibles and crowds, and dispose of in accordance with local laws and regulations.
14. lease store this device in a place out of reach of children and pets.

DISPOSAL

1. When conditions permit, please be sure to completely discharge the battery of this product, and then put the product in the designated battery recycling box. This product contains batteries. Batteries are dangerous chemicals and are strictly prohibited from being disposed of in ordinary trash. For details, please follow local laws and regulations on battery recycling and disposal.
2. If the battery cannot be completely discharged due to the failure of the product itself, please do not dispose of the battery directly in the battery recycling box, and contact a professional battery recycling company for further disposal.
3. The battery will not be able to start after being over-discharged, please dispose of it according to the principle of disposal.

EXCLUSIONS

Pecron’s warranty does not apply to：
Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in Pecron’s current product literature.

CUSTOMER SUPPORT：support@pecron.com

WEBSITE：www.pecron.com
PECRON.LLC

www.pecron.com

References

• PECRON: Portable Power Station & Best Solar Generator Kit

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>