PECRON Q2000S Portable Power Station 2000W-3024Wh Solar Generator User Manual

PECRON Q2000S Portable Power Station 2000W-3024Wh Solar Generator User Manual

Product introduction

Thanks for choosing our portable power station Q serial which is with light weight, high battery capacity and large power rate. This back-up power device can easily provide power in the fields of mobile, outdoor areas just like ambulance, fire rescue and is always applied to outdoor emergency situations, blackout areas and so on.

Main functions for Q2000S/Q3000S:

Q2000S/Q3000S main functions

110V/ 60Hz pure sine wave output
Solar charge
12V10A DC output
QC3.0- dual USB output
Intelligent display screen

Please read the manual before using the power pack and put it together with the power device for future use.

Specifications

DC29.4~40V20A(Solar   charge）

Charging time| 8~9H| 14~15H
DC output| DC12V10A   QC3.0(5V2A   9~12V1.5A)
Temp| 0℃~45℃(Charge),－20℃~45℃(Discharge)

Protection

| Over-voltage, over   temperature

overload, short-circuit

Product color| Black +yellow
Dimension(cm)| L40 W24.5 H27.2
Weight(kg)| 24| 28.5`

Functions

Please read the main functions carefully before using the power unit to avoid unnecessary damage

Accessories list

Q2000S/Q3000S Panel

is 10A.
2| *QC3.02 : supply power to DC equipment (DC 5V2A 9V~12V1.5A)
3| Smart display : showing the batterycapacity,percentage,power and time of charging and discharging.
4| USB Output/Power switch : Press this button to view the remaining power of the power unit. At the same time, the display will turn on, as same as the USB output. If need to turn off it, please press it again.
5| DC charging ports (1, 2 is positive, 3, 4 is negative):charging voltage range of this port is DC 29.4V~40V20A(solar charge)
6| AC outputs : supply 110V output after pressing the AC switch.
7| AC output switch :** AC output will work after pressing it .

Notice for usage

Working environment

Shady

| 0℃~45℃ for charging situation and

-20℃~45℃ for discharging situation

Ventilation| At least 5cm space around the power pack
Safety| Avoid petrol, gas, flammable and other corrosive gas environments

Power charging:
Please pay attention the power unit when it’s charging.Please disconnect the charger and stop charging when the power pack is fully charged.
Please charge the power unit every six months after no use for a long time.

AC load:
Before use the power unit, please ensure the rated power of load power is lowers than the rated power. But sometimes the consumed power of some appliances is greater than its rated power on power-on, the overload protection will occur and power output will turnoff. For example, the general starting current for inductive load equipment is up to 3~8 times of its rated power. And its starting power for energy saving lamp is up to dozens of times of its rated power; Their starting power is much more than the instant maximum power that the power pack can bear, so the load protection works automatically.

Operating steps:

1. Turn on the AC load switch
2. Check the working voltage and frequency of the load.
3. Check the load power and ensure it’s not higher than the rated power of the power unit.
4. Plug in the AC socket of the power unit and turn on the load switch.
5. Turn off the AC output switch after using it.
6. Please charge the power unit on time if the battery is run off or lack of battery so that you can use it conveniently next time!

Note： Please be sure to turn off the switch of AC power when you don’t need to use it. Or it will be in high energy consume mode, consuming the energy in reserve, which may damage the battery

Warranty service

This product is warranted for 12 months. During this time, our company will be in charge of it if there is defects on materials and manufacturing. And we will offer free repair and main parts accessories after checking it by our after-sale department.
The warrant does not cover the following cases:

• Take apart the unit privately

• Damage on surface coating and appearance.

• Breakdown due to wrong installation, packing and usage.
  Customers should do this according to the manual instruction.

• Breakdown or damage caused by accident, man-made environment( mis-operation, crash, unsuitable voltage, damp and etc.)

• Breakdown or damage caused by natural hazard beyond control ( earthquake, fire, tsunami and etc.)

• Maintenance is not including package and products accessories We will offer paid service once warranty period is over.

Certification

Item:____
Inspector:
Date of production:__

Warranty Card

Item__
Product name
Purchase date
Factory No.____
Client__
Contact
Address
Invoice No.____
Dealer____
Address

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>