Dryflow HDDFSEFOH-BRM Steel Force Hand Dryer Instructions
- June 5, 2024
- Dryflow
Table of Contents
Dryflow-HDDFSEFOH-BRM-Steel-Force-Hand-Dryer-PRODUCT
WARNING personal injury or accidents may occur if used Incorrectly
- Do not open the front panel, otherwise this may cause an electric shock
- Ensure children are not allowed to play with the hand dryer and are supervised at all times.
- Do not install the hand dryer too close to excessive water sources such as bathtubs, showers and basins.
- Do not modify or disassemble the unit unnecessarily as this may lead to fire, electric shock or personal injury.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
- You must turn off the power before any maintenance or servicing of the hand dryer takes place.
- The installation of leakage circuit breakers or other protection is recommended to avoid fire hazards etc.
MAINTENANCE
- To clean the outer cover, please turn off the power to the hand dryer, then use a damp soft cloth and a neutral detergent to wipe clean. Do not use acid or alkaline based detergents like benzene, lacquer thinner. Avoid the use of abrasives and nylon brushes as these may damage the cover.
- When cleaning, the dripping of water onto the hand dryer must be avoided to prevent electric shock or the hand dryer to short circuit.
- It is advisable to switch off the hand dryers when not in prolonged use to extend the units service life.
- Only professional persons should disassemble, repair or modify the hand dryer, or else this may cause electric shock, fire or other accidents / injuries.
- If a fault does occur with the unit, please make sure the power supply is turned off as quickly as possible, stop using the machine and commission a professional to make repairs.
TERMS OF GUARANTEE
-
The guarantee period comes into effect from the date of purchase,
please refer back to your invoice. -
If a fault occurs within the guarantee period outlined at date of purchase, please contact and provide proof of purchase to where you brought the hand dryer.
-
The following are not included in the terms of guarantee:
-
Improper use and/or the fault caused by disassembling, repair or modification by anyone not authorised by the company you bought the unit from.
-
Faults and abnormal voltages caused by fires, earthquakes, lightening and any other natural disaster.
-
Faults caused by the use of non-matching power input.
-
Faults caused by operation in poor working conditions or lack of routine maintenance / servicing.
-
If a fault occurs outside the guarantee period, please do still contact the place where you bought the hand dryer as they will be more than willing to assist.
INSTALLATION METHODS
HOW TO USE
TECHNICAL DATA
| Rated Voltage | AC220-240V AC110-127V | Ingress Protection | IPX4 |
|---|---|---|---|
| Rated Frequency | 50/60HZ | Heating Conditions | Ambient Temperature |
<25oC
Rated Power| 1650W| Air Speed| 95m/s
Motor Power| 800W| Drying Time| 10s
Weight| 12KG| Overall Size (mm)| 300 x 222 x 730
COMPONENTS
INSTALLATION METHODS
