PPP Taking Care GPS Personal Alarm User Guide
- June 3, 2024
- PPP Taking Care
Table of Contents
Taking Care GPS Personal Alarm
User Guide
GPS Personal Alarm
This Quick Start Guide gives a simple overview of how to get your Taking Care Anywhere up and running. Please use this Guide in conjunction with the Taking Care Anywhere Set-up & User Guide included in the box and ensure that you have provided us with your full user details prior to setting up your alarm.
- Choose where to put your GO alarm charging base, found in Sections 2 & 3 of the box, and plug it into the mains. Start charging your GO alarm pendant (Section 3 of the box).
- Next, take out your in-home alarm unit (EVA) and your backup pendant (PEARL), found in Section 1 of the box.
- Choose where to put your in-home alarm unit (EVA), plug it into the mains and turn on the power.
- Voice messages will guide you through the installation process step by step. After completing all the set-up steps, place a test call using your in-home alarm unit (EVA) and backup pendant (PEARL).
- An operator will answer and speak to you via your in-home alarm unit (EVA).The operator will then end the call and call you back on your telephone to check our outgoing connection.
- The operator will then help you check the battery level, network strength and location of your GO alarm pendant. They will then hang up.
- After 15 minutes place a test call from your GO alarm pendant.
We’re happy to help if you have any questions
Please call us on 0800 077 8408
Lines are open 9 am–5 pm, Monday to Friday.
QSTCAV1OCT21
Documents / Resources
| PPP
Taking Care GPS Personal
Alarm
[pdf] User Guide
GPS Personal Alarm, Personal Alarm, Alarm
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>