Baseus SULH-01 Lovely Uniaxial Bluetooth Folding Stand Selfie Stabilizer User Manual
- June 5, 2024
- Baseus
Table of Contents
Baseus SULH-01 Lovely Uniaxial Bluetooth Folding Stand Selfie Stabilizer
User Manual
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
Schematic display of product
(appearance and port instruction)
Name: Lovely Uniaxial Bluetooth Folding Stand Selfie Stabilizer
Model: Baseus WS-19017-1
Battery: Polymer Lithium-ion Battery
Gimbal battery capacity: 450 mAh / 3.7 V / 1,665 Wh
Remote control battery capacity: 65 mAh / 3.7 V / 0,24 Wh
Voltage: 5 V
Interface: Micro USB
Charging time: Remote control: 15 minutes (Use a 10 W charger)
Gimbal: 30 minutes (Use a 10 W charger)
Working time: Remote control: 8h
Gimbal: 3h
Size: Collapsed: 20,5±0,5 cm
Stretch: 72±0,5 cm
Material: Aluminium alloy + ABS + PC
Weight: About 235 g
Wireless version: Low power consumption wireless 4.2
Suitable for: Mobile phones within 6,5 inches (less than 100 mm overall
width)
The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances
User instructions
Wireless pairing
Press and hold the power button on the remote control for 3 seconds. Then open
wireless interface in your phone and search for the device. Select “Baseus
WS-19017 1” and you will see a blue light on the stabilizer once connected.
Usage instructions:
Remote control function
- Press and hold the “power button / front and rear camera toggle switch” for 3 seconds to turn on or off, and short press the front and rear camera switch.
- Short-press or long-press the “Enlarge Focus” button to zoom in on the object of the photo.
- Short-press or long-press the “Reduce focus” button to zoom out from the object of the photo.
- Press the “Shutter” button to take a photo or video (video mode must first be selected on phone before video can be taken)
Note: iPhone mobile phone front camera does not support zoom, so you cannot adjust the focus when using the iPhone mobile phone front camera.
Secure phone
Pull the spring-loaded handle to secure the phone inside the holder. Silicone case
When the phone is secured in landscape (horizontal) position, it may
accidentally press against the phone buttons, which may affect the selfie
stand functionality. Please use this accessory to prevent this.
Extend the selfie stick
Hold the bottom of the stand and push the lever up to extend the selfie stick.
How to use the gimbal stand
After securing the phone and making sure the phone is naturally balanced,
press and hold the power button for 3 seconds. The gimbal stand is powered on
when the green light begins to flash slowly.
The gimbal automatically enters stabilizing mode when powered on and will keep
the phone perfectly horizontal during use. (Try to keep the phone centred over
the gimbal while in use. If it cannot be centred, vertical screen mode is
recommended).
Press the power button on the gimbal bracket to rotate 90 degrees
counterclockwise. Double press the power button on the gimbal bracket to
rotate 90 degrees clockwise. Twist the extendable stand to set adjusted height
for the perfect selfie angle.
Non-gimbal mode
When the gimbal is turned off or without power, turn on the dial clockwise to
its home position to lock all gimbal functionality, and continue to use it as
an ordinary tripod selfie stick. Turn the dial counter clockwise to restore
gimbal mode.
Using the tripod
Open the bottom tripod and push the lever up, then place the tripod on a flat
surface.
Charging method
Stand charging method
Connect to the micro-USB port of the gimbal for charging. The red indicator
light will remain on during the charging process.
Remote control charging method
Connect to the micro-USB port of the gimbal for charging. The red indicator
light will remain on during the charging process.
The remote control can be used while the gimbal stand is charging with the supplied dual-head micro-USB charger.
Powering Off
Remote control: Press and hold the camera button for 3 seconds. The blue
light flashes 3 times and then goes out, indicating that it is turned off.
Gimbal: Press and hold the button for 3 seconds. The green light turns off, indicating the gimbal is turned off.
Package contents
Baseus lovely uniaxial Bluetooth folding stand selfie stabilizer
USB-to-2×Micro-USB charger cable × 1
User Manual × 1
Reminder before use:
If not in use for an extended period of time, please manually power off the stand to save power.
- If the wireless connection is not in use for 5 minutes, the remote control will automatically enter sleep mode. Press the camera button again to resume the connection.
- When the remote control battery of gimbal is low, the indicator light will flash red. Please charge it at this time.
- When shooting with the tripod, please pay attention to placing it stably to prevent the phone from falling.
- If the gimbal is off-balance at startup, please do as follows:
Manually power off the gimbal. Lay it flat on a level surface and turn it on as shown in the figure below. Press the gimbal power button five times in a row, and the stand will turn off automatically after three short beeps and one long beep. Power on again and the gimbal should resume normal function.
Important notice:
- This product is not a toy. Children must operate under adult supervision.
- Be careful not to pinch your hands when using.
- Do not disassemble or modify this product by yourself.
- Do not leave this product in a humid environment.
- Do not throw the product into a fire or leave near a heat source, otherwise it will cause the battery to ignite and explode.
- Do not allow water or other liquids to flow into the product, which may cause damage to the product.
- Improper use of the product may cause damage to it or may endanger personal and property safety.
- A costumer shall be liable for all consequences for any personal and property damages resulted from any of his/her improper use of this product against the product user manual, and Baseus shall bear no legal liability
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.