dji Mavic Pro Propeller Guard User Guide
- June 5, 2024
- DJi
Table of Contents
Propeller Guard
User Guide
v1.0
2021.01
1.| 
| 3.|
---|---|---|---
2.| | 4.|
Disclaimer and Warning
Please read this entire document and all safe and lawful practices DJI TM
provided carefully before use. Failure to read and follow instructions and
warnings may result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. By using this
product, you hereby signify that you have read this disclaimer and warning
carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. DJI
accepts no liability for damage, injury, or any legal responsibility incurred
directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and
its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be reproduced in any form
without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the
sole discretion of DJI. For up-to-date product information, visit
http://www.dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence
among different versions, the English version shall prevail.
Introduction
The DJI FPV Propeller Guard is used to reduce harm to people and damage to objects if there is a collision with the spinning propellers of the aircraft. It is recommended to use the propeller guard in windless environments or during indoor or low-speed flights.
Installation
-
Release the locks on the propeller guards. Check the mark on the lock and connect the two propeller guards marked LF (Left Front)and LB (Left Back).
-
With the rear of the aircraft facing toward you, attach the propeller guards from underneath the extended frame arms on the left side.
Make sure the propeller guards form a complete guard around the frame arms. -
Close the locks. There will be a clicking sound indicating the lock is secure.
-
Repeat the steps above to install the propeller guards on the right side. The locks are marked RF (Right Front) and RB (Right Back).
The propulsion performance of the aircraft will be affected after the propeller guards are attached. Fly with caution.
Specifications
| Weight (single) | 21.8 g |
|---|---|
| Radius | 95 mm |
| Installation Circumference | 387 × 332 × 136 mm |
DJI is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved.
Printed in China.
37QDDJBG01TY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>