Dongguan Cloud Micro Electronics 2A4PMK5 110V portable mobile power supply Owner’s Manual

Dongguan Cloud Micro Electronics 2A4PMK5 110V portable mobile power supply

Owner’s Manual

Product Overview

1. Product profile
The product defined in this specification is American standard 110V portable mobile power supply, which integrates portable energy storage power supply system with multiple functional modes. The product has built-in high- efficiency 32700 lithium iron phosphate cell, safe battery BMS management system and high-efficiency energy conversion circuit, which can be placed indoors or in cars. And can be used as home, office, outdoor emergency backup power supply. Charging can choose mains electricity or solar power to charge the product, without external adapter, the product is directly connected to the mains power supply, charging capacity can reach 98% in 1.6 hours, to achieve a real sense of fast charging. The product system can provide rated 110V 1200W AC output, and is equipped with 5V, 12V, 15V, 20V DC output and 15W wireless charging output to meet the requirements of different scenarios. Meanwhile, advanced power management system is configured to ensure long battery life and safety.

2. Docs Release Notes
This document is mainly used for product research and development, production, inspection, sales and product promotion. The customer acknowledges that this document is issued after review and approval. If there is any amendment, the latest version shall prevail.

3. Product Design Standard Ref

1. IEC62133 lithium battery product safety requirements.

2. UL1642 lithium battery pack safety requirements.

3. UL2743 portable power pack safety requirements.

4. EN55022 electromagnetic compatibility related.

5. IEC60950-1:2005+A1:2009+A2:2013 safety standards.

6. UN38.3 safety requirements for transport of lithium battery products international maritime
   dangerous goods code.

7. Ambient temperature: 25℃, humidity: 45 ~ 75% RH, air pressure 86 ~ 106 KPa.

Product Features

1. Compact, lightweight and Portability,Multiple Output Ports；
2. Support mains and photovoltaic charging modes;
3. Ac 110V, DC 5V, 9V, 12V, 15V, 20V and other voltage output;
4. High-performance, high safety and high power 32700 lithium iron phosphate cell;
5. Under voltage, over voltage, over current, over temperature, short circuit, over charge, overrelease and other system protection functions;
6. Use large LCD screen to display power and function indication;
7. Support QC3.0 quick charge function, support PD65W quick charge function;
8. 0.3s fast start, high efficiency;
9. 1800W constant power output;
10. Larger Capacity and Higher Wattages

Product Details Description

1. Product appearance pictures

2. Product Process Specification

1. Using engineering ABS+PC materials, rigid degree, shape the perfect curve.
2. The surface of the shell is clean and clean, without scratches, deformation, and no front.
3. Contact points of output and input interfaces have no corrosion, and the socket is suitable for tightness and smooth sliding cover.
4. The joints between shells should be in close contact, and the visible gap width at the joints should not be greater than 1mm;
5. The internal wiring layout is beautiful and neat.
6. Foot pad is non-slip, shockproof, prevent smooth.

Description of Port

2. LED Screen Description

Function Operating Description

1. Product charging

• Plug the power cord into the AC charging input port of the host power supply, or connect the solar panel to the XT60 port, and the display panel will blink incrementally from left to right. When all the 10 panels are on and the battery percentage is 100%, it means that the product is fully charged.
• When charging, pay attention to the power supply voltage must be the same as the required input voltage, otherwise it will cause overvoltage protection or mains trip.

2. Ac discharge

• Click the “POWER” button for 1S, and the screen lights up. Click the AC button, and the screen displays AC. At this time, insert the load line arbitrarily into the AC/110V output port (6), and the device can be used normally.
• Note: Please do not exceed the maximum output power of the machine 1200W. If the load exceeds 1200W, the power supply will enter the protection state and cannot output, and the buzzer alarm will be issued, and the alarm symbol will appear on the display screen. At this time, the load device needs to be removed, press any set of switches to remove the alarm, and the load power will be reduced to the rated power for normal use.

3. Dc discharge

• Press the “POWER” button for 1S, and the screen lights up. Press the “USB” button to display USB on the screen. Click the “DC” button to display DC on the screen. If a DC or USB function is not used, press the button for 1 second to disable it.
• QC3.0 port: it can charge devices that support fast charging.
• Type-c port: it can support CHARGING of PD65W fast charging device.

4. Hertz conversion
When the AC is off, hold down the “POWER” button and the AC button for 3 seconds to automatically switch to 50Hz or 60Hz. The normal factory setting is 60Hz for the Japanese/American and 50Hz for the Chinese/European.

5. Product standby and shutdown

• When all output DC/AC/USB/ wireless charging is off, the display enters hibernation mode for 50 seconds, and automatically shuts down within 1 minute, or long press “POWER” to shut down.
• If the output AC/DC/USB/ wireless charger are all turned on or one of them is turned on, the display will enter hibernation mode within 50 seconds, and the display will enter the steady state and will not au tomatically shut down.
  Click the “POWER” button or the indicator button to turn on, and long press the “POWER” button for 3 seconds to turn off.

Product Electrical Performance Index & Specification

Battery Pack

Battery BMS Safety Management

1. Power Charging Supply

2. AC Release

3. USB Release

4. TYPE-C Release

5. DC Release Performance

6. Wireless Release

7. Display Screen

8. Product Safety

Reliability Testing & Standard

1. Testing Instrument

2. Testing Project

Product Transportation Info

Product Packing List

Use Environment & Note

1. Please pay attention to the input and output voltage range when using this product. The input voltage and power range required by your device is not within the range of the energy storage power supply.
2. The connection cables must be matched, because different load cables correspond to different equipment. Therefore, in order to normally use the energy storage power supply for your equipment, please use the original connection cable 3 with guarantee.
3. The energy storage power supply needs to be stored in a dry environment. Proper storage method can prolong the service life of the energy storage power supply.
4. If you do not use the product for a long time, please charge and discharge the product once a month to improve the service life of the product.
5. Do not place the product in a place where the temperature is too high or too low
6. High or too low ambient temperature will shorten the service life of electronic products and seriously damage the product shell
7. Do not use corrosive chemical solvent to wipe the product surface stains can be swab with a small amount of anhydrous alcohol to scrub
8. Please handle the product gently when using, do not fall down or disassemble violently
9. There is high pressure in the product, do not disassemble by yourself, lest it may cause safety accident.
10. It is recommended that the device be fully charged for the first time to avoid inconvenience caused by low power. After the device is fully charged, the fan will continue to work for 2-5 minutes after the charging power cable is removed for standby heat dissipation (the specific time may vary with the scene temperature)
11. When the fan is working, prevent dust particles or foreign matters from being inhaled into the device. Otherwise, the device may be damaged.
12. After the discharge is terminated, the fan continues to work to lower the temperature of the device to a proper temperature for about 30 minutes (the time may vary with the scene temperature). When the current exceeds 15A or the temperature of the device is too high, the automatic power-off protection is triggered.
13. During the charging and discharging process, connect the device to the charging and discharging device properly before starting the charging and discharging device; otherwise, sparks may occur, which is a normal phenomenon

FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>