Wiz 9290032030 WiFi BLE Light Bar User Manual
- June 3, 2024
- wiz
Table of Contents
Wiz 9290032030 WiFi BLE Light Bar
Product introduction
You can use the light bars in any of your rooms. You can easily place your
light bars on your cabinet to create a beautiful ambiance. You can also use
the light bars to highlight anything on your shelves or even just place the
light bars on the floor for accent lighting. Box contents: Light bar 2,
Adaptor”1(attached with a cable tie), Short cable”1, Long cable 1(attached
with a cable tie), User manual”1, Quick set-up 1
- Lamp body
- Power button
- Cable(short cable is 8cm, long cable is 150cm)
- Adaptor
Installation instructions
Plug the adaptor to the lamp and make sure the plug is aligned with the insert line as illustrated. Daisy chains one light bar with a cable and another light bar. You can either choose short or long cable upon your application. You can plug the product in from both ends.
Application instructions
You can put two light bars on the sides of your TV or monitor to create
ambiance lighting. Connect each of the light bar one by one via the Wiz App.
Control each of the light bar with different light modes or group the two
light bars together to have one light mode.
Usage instructions
Press the power button to switch on and off. When the light is on, hold the
power button down for dimming. When the light is off, hold the power button
down for 10 seconds to enter pairing mode.
Warnings
Luminaires shall be connected to the supply in compliance with the national
standard of the cOuntry where the luminaires will be installed. Should you
have any doubts, please seek advice from a professional electrician. Always
disconnect from the main supply before installation, connection, and service.
Please make sure to connect a maximum of two light bars to one adaptor. Do not
place the light bar vertically. Please use the adaptor provided in the box
from the manufacturer. The light source contained in this luminaire shall only
be replaced by the manufacturer or his service agent or a similarly qualified
person.
Safety instructions
Read carefully all these instructions before assembling and operating and keep
these instructions. To reduce the risk of fire, electrical shocks, and
personal injuries when using electrical appliances, basic safety precautions
should always be followed. Check if the electrical specifications are
compatible. The product is designed for indoor use only. The construction is
IP20, never use the product in the bathroom or close to water points. The
Product can be installed in dry premises only.
Warning: The external flexible cord of this luminaire can not be
replaced, if the cord is damaged, the luminaire shall be destroyed.
Servicing
How to clean the product
Clean with a soft dust cloth. Never use alcohol, solvent or products of a
similar nature.
Symbols explanation
- Class Ill appliance
- Indoor use only
- Class I appliance
Warranty
Warranty is subject to strict conditions of use, for more information, please
visit our website:
https://www.wizconnected.com/en/consumer/support/
Wireless specification:
- Wireless RF mode frequency band: 2400 – 2483.5 MHz
Maximum transmitted power:
- Wi-Fi: Max 20 dBm
- Bluetooth: Max 10 dBm
Products shall not be used with dimmers, for dimming use the WiZ application. On/off functionality is available without Wi-Fi connectivity.
Wi-FI”, the Wi-Fi CERTIFIED Logo has registered trademarks of VWi-Fi Alliance. Wi-Fi CERTIFIEDTM, WPA3TM are trademarks of Wi-Fi Alliance. The Bluetooth* word and logos are registered trademarks owned by Bluetooth SIG, INC. Amazon, Alexa, and all related logos are trademarks of Amazon.com.lnc or its affiliates. Google is a trademark of Google LLC. Siri is a registered trademark of Apple Inc. Any use of such marks by Signify is under license. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>