WiZ 348603464 Smart Plug User Guide
- June 4, 2024
- wiz
Table of Contents
348603464 Smart Plug
User Guide
DOWNLOAD THE FREE WIZ APP
Search for “WiZ Connected”
INSTALL AND PAIR LIGHT OR DEVICE
Follow the on-screen steps in the app to complete the setup.
ENJOY BEING CONNECTED
Share with family and friends.
Need help? Get in touch through our in-app chat support.
Product Parameters
| Device type | Smart plug |
|---|---|
| Product reference | 9290024468 |
| Rated voltage | 125VAC 60Hz |
| Rated current (MAX) | resistive load (power factor :.0.9): 15 A; |
motor load (power factor :.0.8): 9 A;
motor load (0.6spower factor<0.8): 2.4 A;
tungsten filament lamps: 1.5 A
Rated load (MAX)| resistive load (power factor :.0.9): 1875 W;
motor load (power factor :.0.8): 1125 W;
motor load (0.6spower factor<0.8): 300 W;
tungsten filament lamps: 180 W
IP level| IP20
Ambient temperature| -10 ·cto+35 C
Relay| Normally open, 1-pole, µ contact
Switching cycles| 10,000
Operating type| Sl
Rated impulse withstand voltage ( overvoltage category)| 2500 V (Category II)
Pollution degree| 2
Radiofrequency and transmission power| Wi-Fi 2.4 GHz max 20 dBm
Software class| Class A
**SAFETY INFORMATION & SPECIFICATIONS
**
THIS SMART PLUG IS A GROUNDED DEVICE.
The male plug contains a ground pin and is only intended for use with a three-
pronged grounded outlet.
THIS SMART PLUG IS FOR USE WITH A 125VAC POWER SOURCE; 125VAC / 60Hz DO NOT
ATTACH A DEVICE THAT EXCEEDS THE UNIT RATINGS:
15A / 1875W Resistive
WARNING
- Do not insert the smart plug into another smart plug.
- Do not cover the smart plug when in use.
- The power is disconnected only when the plug is withdrawn from an electrical outlet.
- Intended for dry location use only.
- The smart plug should be placed near the device and easily accessible to the user.
- Do not open the product.
- Prior to use, ensure the smart plug is not damaged. Do not plug into the socket if the casing is damaged in any way.
- Please take the Technical Data (in particular the maximum permissible switching capacity of the relay and the type of load to be connected) into account before connecting a device! All load data relates to resistive loads! Do not exceed the capacity specified for the device. Exceeding this capacity could lead to the destruction of the device, to a fire, or to an electrical accident, and the reliable switching off of the connected device may no longer be possible.
- Do not connect any appliances which could cause fire or other damage if switched on inadvertently (e.g. irons, power tools).
- Do not use plugs to disconnect appliances from the mains. The load is not galvanically isolated from the mains.
- For indoor use only.
- Do not use this product near water for example near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Maintenance and care
- The product is maintenance-free. Repairs should only be performed by qualified persons. Clean the product with a soft clean dry and lint-free cloth after removing the plug from the electrical outlet. Do not use cleaning agents containing solvents.
- Incorrect handling or non-observance of safety warnings may compromise the protection afforded by the device.
Symbols explanation
Waste Electrical and Electronic Equipment This product must be disposed of at
a designated collec tion point for Electrical and Electronic waste. For more
information, contact your local city office or the shop where you purchased
the product.
Indoor use only
Caution:
This device complies with Part 15 of the FCC Rules/ Industry Canada license-
exempt RSS stan~!3rd(s). Op~r ation is subject to the following; J two
conditions: (1) this
device may not cause h<‘-!armful interference, and (2) t~1s device must
accept any 1nterferen~e received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOT E:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These lim_its are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with th~
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment to an outlet on a circuit dif different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV techni can for help.
CAN ICES-3 (B)/NMB-3(8)
MPE Reminding
To satisfy FCC/ IC RF exposure requirements, <‘.) sepa ratio distance of 20
cm or more should be maintained between the antenna of this device and persons
during device operation.
To ensure compliance, operations closer than this distance are not
recommended.
Wi-Fi, the Wi-Fi logo, and the Wi-Fi CERTIFIED logo are registered trademarks
of Wi-Fi Alliance.
Wi-Fi CERTIFIED'”, WPA2™ are trademarks of Wi-Fi Alliance.
Amazon, Alexa, and all related logos are trademarks of
Amazon.com
Inc or its affiliates.
Google, Google Play, and the Google Play logo are trademarks of Google LLC.
The Apple logo and Siri are trademarks of Apple Inc., registered In the U.S.
and other countries and regions. App Store is a service mark of Apple Inc.
All product names, logos, and brands are the property of their respective
owners.
Any use of such marks by Signify is under license.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>