FISHER PAYKEL RF135B Column Refrigerator & Freezer Set with 32 Inch Installation Guide

June 5, 2024
Fisher & Paykel

FISHER PAYKEL RF135B Column Refrigerator & Freezer Set with 32 Inch

COMPONENTS REQUIRED

  • This kit is designed for use on 67 3/4″-high models and can be used to combine any variants of RF135B, RF170B and RF170W with handles.
  • We recommend you save this installation guide for future reference.
ITEM PART NUMBER
Kit Joiner Silver AJ-RF17X 819264
PARTS

Supplied

TOOLS

Not supplied

PRODUCT DIMENSIONS – RF135B COMBINATIONS

PRODUCT DIMENSIONS – RF170B/W COMBINATIONS

Actual product dimensions may vary by up to +3/16″ (5mm).

CAVITY DIMENSIONS – RF135B COMBINATIONS

PROUD INSTALL

FLUSH INSTALL

CAVITY DIMENSIONS – RF170B/W COMBINATIONS

PROUD INSTALL

FLUSH INSTALL

CLEARANCES

PROUD INSTALL

FLUSH INSTALL

INSTALLATION

Before you begin
  • Check cavity dimensions are correct for the type of dual installation you require.
  • Unpack appliances from packaging following guidance on individual cartons
  • Ensure the floor is protected from damage during unpacking and installation. z Check that the Joiner Kit is complete.
  1. Remove the rear compartment cover using a Phillips screwdriver. This will be re-attached later.

  2. Remove the screw on the filter dryer retaining bracket using a Phillips screwdriver.

  3. Remove the retaining bracket, ensuring the filter dryer does not touch any pipes or the side of the rear compartment.

  4. The rear bracket should only be added to the left-hand appliance as viewed from the front. Align the top edge of the rear bracket to the bottom edge of the back panel. Holes for the bracket will need to be drilled into the side of the chassis. Secure bracket from the side using three of the 8×16 screws.

  5. Slot the second, right-hand appliance as viewed from the front, into the bracket, ensuring it sits securely. Do not fix in place.

  6. Adjust front feet of both appliances until level.
    Turn clockwise to decrease height or anti-clockwise to increase height.

  7. At the top of each appliance, remove the three screw caps using a flat-blade screwdriver.

  8. Ensure both appliances are level and aligned before securing the second appliance to the rear bracket using three 8×16 screws.
    Replace both rear compartment covers using a Phillips screwdriver.

  9. Align the front upper bracket to the screw holes.
    Secure by partially engaging the 5×20 screws.

  10. IMPORTANT!
    Two people required.
    Carefully tilt the connected appliances backwards to access the rear feet and the lower front bracket location.

  11. Remove the leveling feet from both appliances using a socket wrench by rotating them anti-clockwise.
    Remove the mounting bolts and washers, and set aside.
    Align the front lower bracket to the spaces created by removing the leveling feet.
    Ensure the bracket is correctly oriented as illustrated.
    Secure using the leveling feet and mounting bolts before lowering the appliances carefully.

  12. Open both doors for easy access to the center join.

  13. Locate the centre trim panel assembly to the tab on the lower bracket.

  14. Position the centre trim panel under the upper bracket before re-tightening the six screws.

  15. Secure the centre trim panel using the remaining 8×16 screw.

  16. Close the doors and position the appliances within the cavity.

ADJUSTING DOOR ALIGNMENT
  1. Ensure front leveling feet are adjusted correctly.
    Incorrect leveling may affect door alignment.

FISHERPAYKEL.COM

© Fisher & Paykel Appliances 2022. All rights reserved.
The models shown in this guide may not be available in all markets and are subject to change at any time.
The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
For current details about model and specification availability in your country, please go to our website or contact your local Fisher & Paykel deale

865192B 02.22

Documents / Resources

| FISHER PAYKEL RF135B Column Refrigerator & Freezer Set with 32 Inch [pdf] Installation Guide
RF135B, RF170B, RF170W, Column Refrigerator Freezer Set with 32 Inch
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Fisher & Paykel User Manuals

Related Manuals