qtx PAR100 3 in 1 LED PAR Can User Manual
- June 5, 2024
- qtx
Table of Contents
PAR100
3in1 LED PAR Can
Item ref: 154.030UK
User Manual
Please read through this manual thoroughly before use, any damage caused by
misuse of the product will not be covered by a warranty.
Thank you for choosing the PAR100, A lightweight and compact LED PAR that Can
fit with 18 3-in-1 RGB LEDs. This unit can be controlled by auto, sound-to-
light, master/slave programs, or via DMX. A great value solution for
background washes illumination.
In the box
Your PAR100 should arrive with you in a single carton in good condition. The
carton should contain 1 x main unit with bracket and screws, 1x remote
control, 1 x UK IEC mains lead, and 1 x manual.
Warning:
To prevent the risk of fire or electric shock, do not expose the unit to rain
or damp environments. In the event of a spillage, disconnect the mains and
allow the unit to dry out naturally. Qualified personnel should then check the
unit before continuing use.
****| Please do not open the cover, it contains high voltage.
This product is not serviceable or repairable by the end-user.
Please refer to qualified personnel for service and repair.
---|---
154.030UK User Manual
Placement:
- Use the included mounting bracket to fix to a stand or lighting truss
- Keep away from damp or dusty environments
- Ensure adequate airflow around the fixture housings
- Ensure adequate access to controls and connections
Cleaning
- Use a soft cloth with a neutral detergent to clean the casing as required
- Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
- Do not use strong solvents for cleaning the unit
Rear panel controls:
| 1. Manual control buttons | 4. LED display |
|---|---|
| 2. DMX Signal in | 5. IEC power in (fused) |
| 3. DMX signal out | 6. IEC power out |
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press the “UP” and “DOWN” buttons to navigate through various setting
functions.
Press the “ENTER” button to save the desired setting.
Menu
| Number range|
Function and description
---|---|---
A001| A001-A512| DMX512 address settings
ADYEN| ADYE or ADno| DMX512 Master on or off (Slave)
Reye| Reye or REno| Remote control on or off
AU01| AU01-AU07| Manual color selection
FF00| FF00-FF99| Color jump setting (speed slow to fast)
---|---|---
EE00| EE00-EE99| Colour fade setting (speed slow to fast)
CC00| CC00-CC99| Colour pulse setting (speed slow to fast)
F000| F000-F255| Strobe setting (speed slow to fast)
SOUND| SOUND| Sound to light white strobe setting
SUND| SUND| Sound to light color change setting
r000| r000-r255| Red dimming (0-100%)
G000| G000-G255| Green dimming (0-100%)
b000| b000-B255| Blue dimming (0-100%)
Remote control
The PAR100 is supplied with an I.R. remote control for quick access to most of the essential functions of the unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum range of approximately 4-5m. Controls and functions are listed on the diagram below:
- Power = Remote on/off
- Auto = Colour jump open/off
- Mode = Colour fade open/off
- Flash = Strobe open/off
- — = Decrease option setting
- R = Red open/off
- G = Green open/off
- Enter = Save option setting
- Music = Sound to light color change open/off
- Motor = Manual color select
- + = Increase option setting
- Dmx = DMX512 open/off
- B = Blue open/off
- W = No function on this model (achieve white by opening red, green, and blue concurrently)
DMX mode:
The PAR100 can be controlled by DMX signal, simply connect the DMX signal
source to the DMX input on the unit via a balanced XLR lead. The same DMX
signal can control extra fixtures by looping through the DMX out on the unit.
To enter DMX mode, select A001 from the menu and confirm the correct start
address by using the “UP” and “DOWN” buttons and “ENTER” to
confirm.
This unit has 7 DMX channels as indicated in the table below:
Channel
| Value| Function|
Setting
---|---|---|---
CH1| 0-255| Master dimming (0-100%)| Available in all modes
CH2| 0-255| Red dimming (0-100%)|
Dimming modes only
CH3| 0-255| Green dimming (0-100%)
CH4| 0-255| Blue dimming (0-100%)
CH5| 0-255| Strobe (speed slow to fast)| Available in all modes
CH6| 0-50| Open CH1-CH5|
51-100| Colour select
101-150| Color jump setting
CH6 (cont’d)| 151-200| Colour fade setting
201-250| Colour pulse setting
251-255| Open sound to light setting
CH7| 0-255| Speed from slow to fast| Available in all modes
Specifications
| Power supply | 110-240Vac, 50/60Hz (IEC) |
|---|---|
| Power consumption | 35W |
| Fuse rating | T1.0A |
| LED quantity | 18 x 1.5W 3-in-1 |
| DMX channels | 7 |
| Illuminance | 1700lux @ 2m |
| Beam angle | 25° |
| Projection distance | 10m (approx.) |
| Dimensions | 200x200x78mm (without Bracket) |
| Weight | 1.17kg |
Troubleshooting
| No power (mains) | Check mains voltage is correct, and outlet is switched on |
|---|
Check IEC lead and fuse (if the fuse continually blows, refer to your dealer)
No light output| Check control panel mode settings
Check DMX settings from the controller (dimmer levels, blackout, etc.)
Unresponsive to DMX| Check that unit is in DMX mode and ensure the DMX address
remains lit to confirm receiving the DMX signal
Check DMX controller is not set to black out
Check DMX controller is on the correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/ cutting out| Ensure adequate ventilation and the unit is not too
close to a heat source
This product is classed as Electrical or Electronic equipment and should not
be disposed of with other household or commercial waste at the end of its
useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford
Park, Manchester. M41 7JQ.
AVSL (Europe) Ltd, Unit 3D North Point House, North Point Bus. Park, New
Mallow Road, Cork, Ireland.