WINIX A231 360 Degree All-in-One 4-Stage True Hepa Air Purifier User Manual

WINIX A231 360 Degree All-in-One 4-Stage True Hepa Air Purifier

MODEL PART DIAGRAM

PACKAGE CONTENT

1. Unit
   

2. 360 All in One True HEPA Filter
   

3. User Manual

WHERE TO USE

• Allow 12 ~ 18 in. of space between TVs, radios, and other electronics
  Electromagnetic interference from certain electronics may cause product malfunction.

• Place indoors away from direct sunlight
  Direct exposure may cause product malfunction or failure.

• Only place on hard, flat surfaces
  Flimsy or slanted surfaces may result in abnormal noise and vibrations.

• Allow 12 ~ 18 in. from walls
  For maximum air flow.

CONTROL PANEL

1. Filter Replacement Indicator
   LED light indicates when it is time to change the filter.

2. Filter Reset Button
   After replacing the 360º All-in-One True HEPA Filter, use a small object such as a paper clip, to press and hold the Filter Reset Button for at least 5 seconds until the Filter Replacement Indicator turns off.

3. Auto Mode Button
   The unit will default to Auto with PlasmaWave® enabled when first powered on.

   • Auto Mode automatically adjusts fan speeds according to your indoor air quality. The fan speed will adjust to low when air quality is good, medium when fair, and to high when poor.

4. Air Quality Indicator
   Color coded LED light indicates one of three levels of Air Quality:
   Red (poor), Amber (fair), and Blue (good).

5. Sleep Mode Button
   When Sleep Mode is activated, the Air Quality Indicator LED light is disabled.

   • Fan speed will automatically set to minimum speed (lower than ‘Low’) which will be nearly silent.
   • When Sleep Mode is active, PlasmaWave® will be disabled, but it can be turned back on.

6. PlasmaWave® Button
   Enables or disables PlasmaWave®
   “When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles passing through PlasmaWave®, it is normal and does not signify product failure.”
   Press the PlasmaWave® Technology button when the unit is on to enable or disable this feature.

7. Fan Speed Indicator Buttons
   Indicates the current fan speed.

   • Use the Fan Speed arrow buttons to set the desired fan speed. Fan speeds cycle over in this sequence: Auto, Low, Medium, High, Auto.
     

8. Power Button
   Turns the unit on or off. During the first 30 seconds of power, the Air Quality Indicator will cycle through Blue, Amber and Red colors.

   • Smart Sensor takes approximately 4 minutes to detect the air quality in the environment before normal operation begins.

4-STAGE AIR PURIFICATION

1. Fine Mesh Pre-Filter
   Designed to catch larger airborne particles found indoors.

2. True HEPA Filter
   Winix True HEPA captures 99.97% of airborne allergens including pollen, dust, smoke, pet dander, and particles as small as 0.3 microns.
   Based on independent laboratory tests conducted on inanimate particles as small as 0.3 microns.

3. Activated Carbon Filter
   Reduces VOCs and household odors from cooking, pets, and smoke.

4. PlasmaWave®
   Winix PlasmaWave® Technology may help to reduce airborne contaminants.
   Tested by an independent third-party laboratory. Visit www.winixamerica.com for more details.

MAINTENANCE

When to Replace Filters

Approx. 12 months

• When the Check Filter indicator LED is on, it is time to replace the All-in-One True HEPA Filter.
• Intervals between filter replacement may vary depending on environment.

INITIAL OPERATION

1. Turn the product upside down.
   

2. Grab the handle at the bottom of the product, turn counter-clockwise, and pull out the filter cover.

3. Remove the protective vinyl from the filter installed inside the product. 

4. Install the filter top side down into the bottom of unit until it is fully inserted. The top of the filter shows the opening and the bottom of the filter is solid.
   

5. After installing the filter, turn the handle clockwise to close the filter cover.
   

6. Return the product to an upright position and resume normal operation.
   

REPLACING FILTERS

CLEANING CARE

Cleaning the Filters:

Clean with a vacuum or a soft brush.

• Only clean the Pre-Filter.
• This filter CAN NOT be washed.
• Intervals between filter cleaning may vary depending on the air quality.

NOTICE
Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.

Resetting Filter Life:
After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front Panel. While the unit is on, use a small, thin object
(such as a paperclip) to hold the Filter Reset Button for at least 5 seconds until you hear the beep. After the beep, the Filter Replacement Indicator will disappear.
Your Winix True HEPA is now reset.

Cleaning the Exterior & Interior:

Wipe with a soft damp cloth using room temperature water. Afterwards, wipe it down with a clean dry cloth.
After turning the product upside down, remove the filter cover and clean the interior with a vacuum cleaner.

• For optimal performance, clean every 14 days.

NOTICE

• When cleaning the unit, always unplug the power cord first and then wait until the unit has cooled down.
• Never disassemble, repair, or modify this unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Before cleaning or maintaining, ensure unit is unplugged.

SAFETY AND CAUTIONS

Before operating this equipment, carefully read and follow these safety cautions.

• Ensure filters are inserted before running unit
  Running the unit without filters may shorten the lifespan of the unit and cause electric shock or injury.

• Be sure foreign objects are NOT inserted into the vents on the unit
  Objects can include pins, rods, and coins.

• Do not touch any part of the interior of the unit with wet hands
  The high voltage may cause electric shock.
  Ensure unit intake and outlet vents do not become blocked Blockage may lead to increased internal temperatures, causing product failure and deformation.

• Do not use the unit as a step stool or place heavy objects on it
  Personal injury may occur or product failure and deformation.

• When turning the product upside down, install the filter with care in the direction that the bottom (blocked) side of the filter is visible from the top
  If the filter direction is not installed properly, it may cause product damage and user injury.

WARNING
Follow these instructions to reduce the risk of serious injury or death and to reduce risk of damaging the unit.

• If the power cord is damaged, it must be replaced with a special cord. Assembly available from the manufacturer or its service agent.
• This appliance is not intended for use by a person (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This unit is not intended to be used to preserve documents or in art conservation.
• Do not pull on the power cord when unplugging the unit.
• Do not tie or knot the power cord when unit is in operation.
• If the unit becomes submerged in water, unplug it and contact customer service.
• Do not unplug or move the unit while in operation.
• Do not plug additional appliances into the same outlet or power supply.
• Do not touch the plug with wet hands.
• Unplug the unit when not in operation for extended periods of time.
• Do not place around heating elements.
• Do not use around mist or fumes from industrial oil or around large quantities of metallic dust.
• The cord can become damaged by forcefully bending, pulling, twisting, bundling, pinching or placing heavy objects on it.
• Do not install in any sort of motor or transport vehicle (trucks, boats, ships, etc.).
• Do not place in an area with excessive amounts of noxious gases.
• Do not place near any flammable materials (aerosols, fuel, gases, etc.).
• Do not have the unit facing into wind or drafts.
• Do not place below any electrical outlet.
• Do not place in excessively humid areas where the unit may become wet.
• To reduce the risk of fire or electric shock,
• Do not use this fan with any solid-state speed control device.
• Do not place unit closer than 12 inches from the wall during operation. It may cause condensation on the wall and the surrounding area.

SAFETY INSTRUCTIONS

Thank you for purchasing a Winix air purifier. This product is for household use only.

IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER
WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.

• Do not repair or modify the unit. All repairs should be completed by a qualified technician.

• The plug for this unit is polarized with one blade wider than the other. Do not force the plug into an electrical outlet. Do not alter the plug in any way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified technician to install a proper outlet.

• Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose.

• Use AC 120 V only.

• Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects on the power cord.

•  Periodically remove dust from the power plug.
  This will reduce the risk of shock due to humidity build up.

• Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp by holding the plug itself, never hold by the cord.

• If the power plug is damaged, it must be replaced by the manufacturer or a qualified technician.

• Remove the power plug from the outlet when not in use.

• Do not handle the power plug with wet hands.

• Do not operate the unit when using indoor smoke-generating insecticides.

• Do not clean unit with benzene or paint thinner.
  Do not spray insecticides on the unit.

• Do not use the unit where it is humid or where the unit may become wet, such as the bathroom.

• Do not insert fingers or foreign objects into air intake or outlet.

• Do not use the unit near flammable gases. Do not use near cigarettes, incense, or other spark-creating items.

• Unit will not remove carbon monoxide emitted from heating appliances or other sources.

IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER

• Do not block the intake or outlet vents.
• Do not use near hot objects, such as a stove.
• Do not use where the unit may come into contact with steam.
• Do not use the unit on its side.
• Keep away from products that generate oily residue, such as a deep fryer.
• Do not use detergent to clean the unit.
• Do not operate without a filter.
• Do not wash and reuse the True HEPA Filter.
• Hold the handle on the back of the unit to transport.
• Do not hold by the front panel.
• Do not stick any small objects in the air outlet vents or fan.

FREQUENTLY ASKED QUESTIONS

The unit does not turn on at all

• Is the plug securely attached to the outlet?
  • Make sure the outlet has power going to it and ensure the plug is secured.
• Is there a power outage?
  • Check to see if other lights and electrical equipment are working and try again.

The unit doesn’t work in Auto Mode

• Has Auto Mode been selected?
  • Press the Fan Speed button until Auto Mode is selected.
• Is the sensor blocked or clogged?
  • Wipe Smart Sensor with wet cloth, then dry.

It vibrates and makes a lot of noise

• Is it running on a slanted or uneven surface?
  • Move the unit to a hard, flat, even area.

The power plug and outlet feel hot

• Is the plug securely plugged in?
  • Make sure the plug is properly plugged into the outlet.

There is a strange smell

• Is it being used in a place with a lot of smoke, dust, or odors?
  • Clean the air intakes on either side and clean the Pre-Filter.
  • Replace the 360º All-in-One True HEPA Filter.

The fan strength is weak. The unit is not purifying the air

• Is the Check Filter Indicator light on?
  • Change the filters as required.

PRODUCT WARRANTY

The terms of the warranty are as follows.

1. This product is manufactured under stringent quality control and inspections.
2. The warranty will be voided if product failure is a result of negligence or misuse by the consumer. A proof of purchase must be presented upon claiming a Product Warranty.
3. Store the proof of purchase in a safe place or register your product on winixamerica.com to upload your proof of purchase.
4. 5. This warranty is valid only in the USA and Canada.

• for more information visit https://winixamerica.com/terms-and-conditions/

Customer

| Address|
Name|
Tel.|
Model Name| A231 / A230
Power Voltage| AC 120 V / 60 Hz

UNIT SPECIFICATIONS

The exterior, design, and product specifications may be changed without prior notice to improve product performance.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or on experienced radio / TV technician for help.

This device contains license-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

To expedite service, please specify the model name and number, the nature of the problem, your contact information, and your address.

Dedicated Call Center: 877-699-4649
Website: www.winixamerica.com

References

• Homepage - Winix America Inc
• Homepage - Winix America Inc
• Terms and Conditions - Winix America Inc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>