atomi 9 Inch Vanity Mirror with Bluetooth Speaker and USB Port User Manual
- June 5, 2024
- atomi
Table of Contents
9 Inch Vanity Mirror with Bluetooth Speaker and USB Port User Manual
IMPORTANT SAFEGUARDS
When used in a directed manner, this unit has been designed and manufactured
to ensure your personal safety. However, improper use can result In potential
electrical shock or fire hazards.
READ ALL INSTRUCTIONS BEFORE USING.
GENERAL
Please exercise caution when in use as the mirror is made of glass.
- Water and Moisture – The unit should not be used near running water or In humid environments. For example, near a bathtub or steaming shower, washbowl, kitchen sink, laundry tub, swimming pool or wet basement.
- Ventilation- The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
- Heat- The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Never place the mirror in or expose the mirror to direct sunlight. Left unattended, the sun’s rays can reflect to become focused and cause excessive heat and/or fire.
- Power Sources- The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
- Power Cable Protection- Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged Into an AC socket.
- The cleaning-The unit should be cleaned only with a damp cloth.
- Objects and Liquid Entry- Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
- Lightning and Power Surge Protection- Unplug the unit from the wall socket during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
- Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
- Periods of Non-Use- If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
SAVE THESE INSTRUCTIONS
Thank you for purchasing the Atomi Vanity Mirror + Qi Charger + Speaker
The Atomi Vanity Mirror + Qi Charger + Speaker doubles as a vanity mirror and
Bluetooth1M speaker. Equipped with natural daylight LED lighting, it
flawlessly magnifies your reflection while streaming your favorite playlist.
What’s Inside
Bluetooth Speaker Specs
Speaker 5 Watt hi-fi driver with passive subwoofer BluetoothTM: 4.1- 33 ft.
range
Charge Station Specs
Power Supply
Input:100-240V-50/60Hz 1A Output:12VDC 3A
LED Vanity Mirror+Speaker Battery 3.7VDC 2000mAh 7.4Wh Input: DC12V3A USB
Output: DC5V2.4A,12W Wireless Output:15W
Features of the Atomi Vanity Mirror + Qi Charger + Speaker
Control
NOTE:
- The Bluetooth speaker will automatically power off after 10 minutes of Inactivity.
- When the battery’s voltage is less than 3.1V. the Bluetooth speaker will automatically power off.
- When LED Vanity Mirror + Speaker is plugged into a power source. the speaker will automatically use DC power.
LED Indicator
Power / Bluetooth™ Indicator Light
- Power. When LED Vanity Mirror + Speaker is plugged in, the LED indicator will turn red (charging). When the battery is full, the LED indicator will turn off.
- Bluetooth™: LED indicator flashes blue when the speaker is in pairing mode. When the speaker is successfully paired. The LED indicator will turn solid blue.
Qi Charging Indicator Light
- Qi Charging: LED indicator turns blue when your mobile device is charging. When the battery is full, the LED indicator will turn green and automatically turn off after a few seconds.
Bluetooth™ Setup
Any Bluetooth ™ -enabled device (4.1) can be paired with the Atomi
Vanity Mirror + Qi Charger + Speaker.
-
Press and hold the power button for 3 seconds to turn the speaker on. When the Vanity Mirror + QI Charger + Speaker Is turned on. the Indicator starts flashing blue. The speaker will then enter into auto-pairing mode and attempt to pair with a nearby Bluetooth ™ device.
-
Once turned on. the Vanity Mirror + Qi Charger + Speaker should appear on your device’s Bluetooth ™ list. If a message such as “Not Paired” or “Not Connected” appears, select ‘VanitySpeaker Mirror to connect.
-
Once pairing Is successful, you will see a solid (non-flashing) blue light.
-
You may now play music on the LED Vanity Mirror + Speaker through your device. The next time the speaker is powered on, it will automatically link with the last paired Bluetooth ™ device. To pair with a new device, follow steps 1-3.
NOTE A Bluetooth™ device must be within 33 feet LED Vanity Mirror + Speaker to be paired with it.
Charging with the Qi pad
Place your device on the designated charging area of your Vanity Mirror. Charging will begin on contact. The indicator light will turn on blue while the device is charging.
Charging with the USB port
Connect your device to the USB port on the back of the Vanity Mirror + Qi
Charger + Speaker using a charging cable (not included).
Light
Control
Press and hold for 3 seconds to turn ON the light. Press again to switch light intensity (3 modes). Press and hold for 3 seconds to turn OFF the light.
Press and hold for 3 seconds to turn ON the light. Press again to switch light intensity (3 modes). Press and hold for 3 seconds to turn OFF the light. Charging your LED Vanity Mirror + Speaker
When the LED light is flashing red, the LED Vanity Mirror + Speaker has 10% battery left and should be connected to the AC adapter.
When charging by USB, the mirror must be connected to the power cord to enable USB charging.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. Operation is subject to the following two
conditions:
- This device may not cause interference and
- This device must accept any interference received. Including interference that may cause undesired operation.
Warning: Changes or modifications baths sit not expressly approved by the
re party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE :7Na equipment has been tested and bound to comply with the limits
for a Gloss B digital device, pursuant to Fort 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, If not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user Is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio technician for help.
The equipment compiles wth FCC radiation exposure Ilmts set fain fa an
uncontrolled envtorrnert Durlryg the operation of device a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
For questions or concerns. email us at
irfo@ataniusa.corn
Manufactured and marketed by Atoml Inc.
10 West 33rd St.. New York. NY 10001
otomi™ is a trademark of Atomi Ina. Designed by anomi in New York. Made in
China One-year limited Warranty- Atoml of purchase against defeats In materiel
and workmanship.
WE APPRECIATE FEEDBACK!
Please allow our customer service team to help with any issues before you
leave a review.
Need assistance?
WE CAN HELP
DO NOT RETURN THIS PRODUCT TO THE STORE
Call 1-800-757-1440
Mon-Fri 9:00 a.m.- 5:00 p.m. EST (US)
or email us at info@atomiusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>