qtx Starscape Multi-Colour Laser Effect User Manual

qtx Starscape Multi-Colour Laser Effect

Introduction

Thank you for choosing this product. Please read this manual carefully to achieve the best results from your purchase and to avoid damage through misuse. This laser has been designed to create multiple laser effects and patterns across a wide area. Please keep this manual for future reference.

CAUTION

• This Class 3B laser product emits hazardous levels of optical radiation and will cause injury to the eyes if viewed directly.
• This product is not suitable for projection directly to audiences or other personnel.
• This product must not be used for any form of audience scanning application and is for professional use only.

Important information

This product is a Class 3B laser and should only be installed and used by personnel who are trained in the management of laser radiation and are able to operate in accordance with the guidance given by the Health and
Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display purposes”.
Copies of this guide can be downloaded from the HSE website:
www.hse.gov.uk/pubns/priced/hsg95.pdf
This product contains no user-serviceable parts. Under no circumstances should any attempt be made by the user to modify it in any way.

Technical Specification

1. Voltage: 100-250Vac, 50/60Hz (IEC)
2. Rated Power: 10W
3. Green Laser: 50mW @515nm Wavelength
4. Red Laser: 80mW @638nm Wavelength
5. Blue Laser: 100mW @450nm Wavelength
6. Working Modes: DMX, Sound-Active, AUTO, Master-Slave.
7. DMX Control Channel: 5 Channels
8. Size: 190 x 145 x 85mm
9. Weight: 1.2Kg

Function & Setting

Sound-Activated Mode
When setting up sound-activated mode please select the LED display on the back of the unit. Scroll through the menu to find and press enter to make life. The patterns will change in accordance with the sound. If there is no sound detected from the microphone, then the laser will have no output.
AUTO Mode
When this setting is live the laser will change patterns automatically and go through different cycles with no external control. The laser will not black out when in this mode.
DMX Control
When controlling lasers via DMX set up the controller through the input socket. DMX can control the system mode, the laser pattern, the size, the position, the speed, etc.
For more information please see the Control Parameter Chart.

Front/Rear Panel

1. Laser Aperture
2. Laser Emission Indicator: White
3. IEC Power
4. Laser Key Switch
5. Sound Active Microphone
6. LED Display
7. Setting Buttons
8. DMX or Linking Jack

DMX Control Parameter Chart

Menu Operation Instruction

To choose a mode, cycle the menu and select your chosen operation and press enter to activate.
Sound Active Mode
During the sound mode, every time the unit records sound the LED display will change between 0 and 99, shown like to.

DMX Mode During DMX

mode uses the Up/Down buttons to change the DMX address and press the Enter button to save the parameter. The address on the LED display will be changed in relation to the address number (from A001 to A511).

Troubleshooting

1. If the power supply indicator doesn’t light up and the laser doesn’t work, please check the power supply and the input voltage.
2. If the laser is not working in DMX mode, then please try one of the following; either check that the laser is in DMX mode or ensure that there is a good connection.

This product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

• Errors and omissions excepted.
• Copyright@ 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford Park, Manchester. M41 73Q.
• AVSL (Europe) Ltd, Unit 3D North Point House,
• North Point Bus. Park, New Mallow Road, Cork, Ireland.

References

• TCPDF
• Edit PDF | PDFzorro - Free Online PDF Editor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>