EUNorau BC182 Series ebike User Manual
- June 3, 2024
- EUNORAU
Table of Contents
EUNorau BC182 Series ebike
Appearance and Size
- Size Specification
Features Introduction
-
Features & Parameters
BC182 offers display function about common cycling data and statistical result, as well as some practical functions.- Current Speed, Max Speed, Average Speed
- Current Motor Power
- Battery Level
- Assist Gears
- Total Range, Trip Range
- Trip Time
- Calorie Consumption
- Light Indicator
- Metric (km/h)/British (mph) Unit Shifts.
- Error Code
- Backlight Adjustment
- Auto Power off Time
- USB Port (5V/1000mA)
-
In addition, the Bluetooth version supports the following features:
- APP connection
- Data Synchronization
- Cycling Ranking
- Riding Track Records
Button Description
Operation
-
Power on/off
Under power off status, long press [Power] to enter logo interface with power- on interface after 1s and cycling interface after 2s.
In any working interfaces, long press [Power]to switch off. -
Cycling Interface
The cycling interface supports multiple parameters display:
-
Gears Shifts
Click on [+] / [-] button to shift gears; Long press [-] for 2S to start 6km/h push assist mode and release [-] to exit push assist mode.
-
Turn on/off lights
Long press [+] for 2s to turn on/off the lights during E-bike is running. -
Reset Trip Range
Long press [Power] and [+] synchronously to reset the trip range:- Note: For the Bluetooth version, the max speed, average speed, the total trip time and calories can be reset synchronously.
Common Error Codes (the error codes are related with E-bike’s fitting part (please refer to the information below):
Protocol Error Code
- User Menu
In a static and fault-free state, long press [+] and [-] or 1s synchronously to enter the user menu interface. The speed limits, data unit, auto power-off time and backlight brightness can be set up. The Bluetooth connection can be set in menu with Bluetooth version. If the interface doesn’t operate for 60s, system will return Riding interface automatically.
Unit Setting
Selecting menu “Set Unit”, click on [+] / [-] to shift unit. Click on
[Power]to confirm and save, then shift to “OK” interface, it returns to
setting menu interface automatically after 2s standstill.
Backlight Brightness setting
Selecting menu “Brightness”, click on [+] / [-] to shift brightness setting,
the adjustment range is Auto 1-5. Clicking on [Power] to confirm and save,
then shift to “OK” interface, it returns to setting menu automatically after
2s standstill.
Auto Power-off Time
Selecting menu “Set Auto Off”, click on [+] / [-] to shift auto power off
time, the adjustment range is 0-99 (in minute). 0 is switch off the function
of auto power off. Clicking on [Power] to confirm and save, then shift to “OK”
interface, it returns to setting menu automatically after 2s standstill
.
Speed Limits Adjustment
Selecting menu “Speed Limit”, click on [+] / [-] to adjust speed limiting, the
range is 12- 40km/h. Please note that speed limiting and setting unit keep
synchronized, which can shift to
mph. Clicking on [Power] to confirm and save, then shift to “OK” interface, it
returns to setting menu automatically after 2s standstill.
Bluetooth connection setting
User can search – “EUNORAU GO” in your App Store or Google Play, or scan the
following QR code to download the mobile app.
To connect the display for the first time, it need choose “Connect To APP” in
menu, scan QR code by APP to bind E-bike. After operation is finished
successfully, the icon “Bluetooth” stops flickering but lights constantly
.
OTA upgrade (Bluetooth Version Only)
After APP is linked, OTA upgraded will activate display to be in OTA upgraded
status. Shut down and reboot after OTA upgraded is finished.
Advanced Menu
BC182 provides advanced menu for E-bike manufacturer, which could adjust the E-bike configuration and the following parameters:
- Wheel Diameter
- Battery Voltage
- Speed Sensor
Enter Advanced Menu
When the display is in a shutdown status, long press [Power]for 6s, it runs
and the advanced menu interface displays
Click on [+]/[-]to adjust flickering parts and click on [Power]to change flickering part or confirm the login. and then input the password 1919.
- If password input is wrong, the 1st number will flicker again, user can readjust each digit.
Wheel Diameter
Select “Wheel Diameter” and click on [+]/[-]to adjust wheel diameter digit (in
Inch), adjustment range: 16/18/20/22/24/26/27.5/28/700C. Clicking on [Power]
to confirm and save, then shift to “OK” interface, it returns to setting menu
automatically after 2s standstill.
Speed Sensor
Select menu “Speed Sensor”, click on [+]/[-]to adjust digit, adjustment range:
1-12. Clicking on [Power] to confirm and save, then shift to “OK” interface,
it returns to setting menu automatically after 2s standstill.
Battery Voltage Setting
Select menu “Battery Voltage”, click on [+]/[-]to shift battery voltage (in
volt), the range: 36V/48V/52V, click on [Power]to confirm and save, then
switch to next interface.
Exit
- If there’s no operation for 60s in any working interface, system enters Riding interface automatically.
- Long press [Power] for one second in any working interface, system shuts down.
EUDORA APP USING MANUAL
- After connecting by Bluetooth, choose the model you need to pair.
- Enter this page, you can see the Bluetooth status. Also some function settings and the riding data show here.
- You can set some function, e.g. Headlights off/on, Unit Switch and Gear adjustment.
- In the further setting, you can set Ebike Nickname/Screen Brightness/Auto Power/Speed Limit /Wheel Diameter/Unlock Code/Unpair/Lock Function.
- When click the lock icon “lock on” as below show, you can lock and unlock the display. After Bluetooth is off, you need input the password once power on. The initial password is 0000. You can set your password in the app.
- Enter Riding Status page
- Click “Start” , start the riding
- Click “Pause”, pause the riding. If continue the riding, click “Continue”, otherwise touch “Destroy”, end the riding.
Attention
- Please make sure to turn off the power before the device is connected, otherwise it causes device damaged permanently;
- Please make sure to fix the inner hexagon screws with a maximum torsion value less than 1Nm, otherwise it causes device damaged;
- The device is not permitted to soak in water;
- Please use soft wet cloth to wipe the surface and clean the device, DO NOT use or spray any chemical liquid;
- The USB port of display is NOT waterproof. Please ensure the protective rubber plug is tucked tightly during riding in the rain. It’s forbidden to connect external devices in the rain;
- Please scrap the device abide by local laws and regulations, discard or recycle in any ecofriendly way. Please do not discard device or any accessories as domestic garbage;
- Improper installation, human damage and failure are not covered by the after-sale warranty;
- Please contact [email protected] for pre-sale and after-sale matters.
References
- Bosch eBike Systems | Premium eBike systems & smart features - Bosch eBike Systems
- Affordable Electric Ebikes | Mid Drive & Road Ebike – EUNORAU ELECTRIC BIKES
- Affordable Electric Ebikes | Mid Drive & Road Ebike – EUNORAU ELECTRIC BIKES