BAXTER SS-102-BK Oil Filter Anti Drain Adapter Instruction Manual
- June 12, 2024
- Baxter
Table of Contents
SS-102-BK Oil Filter
Anti Drain Adapter
**Instruction Manual
**
Installation Instructions
For use on FA20/24 and FB16/20/25 engines
Read instructions thoroughly prior to installation.
Step 1: Remove oil filte Step 2: Install adapter without base seal
O-ring.
Torque to 30 ft. lbs. using 1” Deep Socket. Step 3: Establish port to be
utilized for air valve.
Step 4: Remove adapter. Apply oil to hex plugs and install in two ports
not utilized. (If using sealing tapebe sure tape is on treads only and not end
of plug)
Step 5: Install Viton O-ring and lubricate with oil.
Torque to 30 ft. lbs. using 1” Deep Socket. Step 6: Install Schrader
valve.
Step 7: Install an appropriate size oil filter that contains M20x1.5
threads. Subaru oil filters will fit this adapter.
Caution : Make certain that filter/adapter height will not contact hood
when closed. Step 8: Install caution sicker if oil/filter change will be
serviced by an oil service technician.
Prior to servicing for oil and filter change,
remove oil filler cap and apply min 30/max 100 psi compressed air with air
chuck for 2 seconds, this will evacuate oil filter for easy and clean oil
filter removal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>