dji LTE USB Modem Cellular Dongle User Guide
- June 5, 2024
- DJi
Table of Contents
dji LTE USB Modem Cellular Dongle
OVERVIEW
- SIM Card Slot Cover
- SIM Card
- Slot Antenna Ports
- Cover Antenna Ports
- USB-C Port
- Status Indicator
Disclaimer
Please read this entire document and all safe and lawful practices DJITM provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and
its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be reproduced in any form
without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the
sole discretion of DJI. For up to date product information, visit
http://www.dji.com and click on the product page for this product. This
disclaimer is available in various languages. In the event of divergence among
different versions, the English version shall prevail.
Warning
- The LTE USB Modem does not include a SIM card. Use a SIM card that is compatible with the product operating frequency and the chosen mobile network provider and select a mobile data plan according to the planned level of usage. Users are responsible for these additional costs.
- The LTE USB Modem only supports nano-SIM cards.
- DO NOT touch the LTE USB Modem when it is in use as it may be hot.
- This product is NOT a toy. Children should only operate this product under the supervision of adults.
- Small parts of this product and its accessories are dangerous if swallowed. Keep all parts out of reach of children.
- DO NOT connect this product to non-specified devices. Otherwise, users may violate local regulations and laws and the product may be damaged. Specified devices include Windows computers and compatible DJI devices. Refer to the user manual, user guide, or other manual documentation of the corresponding DJI device to learn more about the compatibility.
Introduction
Supporting various communication standards and frequency bands, the LTE USB Modem enables users to connect to the internet and transmit data between devices through a network service when used with a nano-SIM card.
Installation
Installing the SIM Card
As shown in Figure A, open the SIM card slot cover on the modem, insert the
nano-SIM card into the slot in the same direction as in the figure, and close
the cover.
Connecting to a Device
The modem can connect to a computer or other compatible devices. Connect the
USB-C port on the modem to the corresponding port on a device using a
compatible cable according to the port.
Status Indicator Descriptions
The modem will automatically power on when the connected device is powered on. The status indicator indicates the current working status. Refer to the table below for more information.
Specifications
Disposal and Recycling Information
The crossed-out wheeled-bin symbol on your product reminds you that all
electrical and electronic equipment must be taken to separate waste collection
points at the end of their lifecycle. It is the responsibility of the user to
dispose of the equipment using a designated collection point or service for
separate recycling of waste electrical and electronic equipment (WEEE)
according to local laws.
Proper collection and recycling of your equipment helps ensure electrical and
electronic equipment waste is recycled in a manner that conserves valuable
materials and protects human health and the environment, improper handling,
accidental breakage, damage, and/or improper recycling at the end of their
lifecycle may be harmful for health and environment.
EU Regulatory Compliance
Compliance with the RE Directive
Honglink Wireless Solutions Co., Ltd. declares that this device IG830 is in
compliance with the essential requirements and other relevant provisions of
the RE Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: https://www.dji.com/euro-
compliance
RF Exposure Information (SAR)
This device is designed not to exceed the emission limits for exposure to
radio waves (radio frequency electromagnetic fields) adopted by ICNIRP
guidelines and RE Directive 2014/53/EU. The radio wave exposure guidelines use
a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR
limit is 2W/kg. Testing for SAR are conducted using standard operating
positions at 5 mm distance with the device transmitting at its highest
certified power level in all tested frequency bands. The highest SAR values
for this device is 1.53 W/Kg.
Legal information
This device may be operated in all member states of the EU. Observe national
and local regulations where the device is used.
Frequency Bands and Power
The maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard.
- GSM 900: 35 dBm
- GSM 1800: 32 dBm
- UMTS Band 1: 25 dBm
- UMTS Band 8: 25 dBm
- LTE Band 1/3/7/8/20/28/38/40: 25 dBm
UK Regulatory Compliance
Compliance with the Regulations 2017（SI 2017/2016）
Honglink Wireless Solutions Co., Ltd. declares that this device IG830 is in
compliance with the essential requirements and other relevant provisions of
the UK Radio Equipment Regulations 2017(SI2017/2016).
RF Exposure Information (SAR)
This device is designed not to exceed the emission limits for exposure to
radio waves (radio frequency electromagnetic fields) a dopted b y C ouncil R
ecommendation 1 999/519/EC, I CNIRP G uidelines, a nd U K Radio Equipment
Regulations 2017 (SI 2017/1206). The radio wave exposure guidelines use a unit
of measurement known as the Specific Absorption Rate, or SAR. The SAR limit is
2W/kg. Testing for SAR are conducted using standard operating positions at 5
mm distance with the device transmitting at its highest certified power level
in all tested frequency bands. The highest SAR values for this device is 1.53
W/Kg.
Frequency Bands and Power
The maximum radio-frequency power transmitted in the frequency bands in which
the radio equipment operates: The maximum power for all bands is less than the
highest limit value specified in the related Harmonized Standard.
- GSM 900: 35 dBm
- GSM 1800: 32 dBm
- UMTS Band 1: 25 dBm
- UMTS Band 8: 25 dBm
- LTE Band 1/3/7/8/20/28/38/40: 25 dBm
FCC Regulatory Compliance
FCC regulations
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult an authorized dealer or service representative for help.
Honglink Wireless Solutions Co., Ltd. is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications t o t his equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
RF Exposure Information (SAR)
This device is designed not to exceed the emission limits for exposure to
radio waves (radio frequency electromagnetic fields) adopted by the Federal
Communications Commission (FCC) The radio wave exposure guidelines use a unit
of measurement known as the Specific Absorption Rate, or SAR. The SAR limit is
1.6W/kg. Testing for SAR are conducted using standard operating positions at 5
mm distance with the device transmitting at its highest certified power level
in all tested frequency bands. The highest SAR values under the FCC guidelines
for this device is [1.18 W/Kg].
IC Radiation Exposure Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with “Industry Canada RSS-102 for radiation exposure
limits set forth for an uncontrolled environment”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>