MouseTrapper Prime Wireless Ergonomic Mouse Instruction Manual

: October 27, 2023
: MouseTrapper

Table of Contents

Connecting Mousetrapper
Basic tips
Customizing
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Prime Wireless Ergonomic Mouse
Instruction Manual

Connecting Mousetrapper

Installation
Connect the battery in the battery compartment and then connect the USB cable to charge until the LED is green. Then disconnect the cable and open the computer’s Bluetooth menu and connect to ”Prime ble”.
Your Mousetrapper is now connected, and its keys can be used as shown in Figure 2.
Charging the battery
The battery in the Mousetrapper needs charging when the battery indicator flashes red. Connect the Mousetrapper using the included USB cable and allow it to charge until the LED indicator shines green.
Changing from Mac to PC configuration
The product is configured for PC on delivery. To configure it for Mac, simultaneously depress the lower right button and the lower left button (Copy and Paste) for 3–4 seconds. The LED will flash red to confirm the configuration. Repeat the procedure to change back to the PC configuration.

Basic tips

Positioning
Position your Mousetrapper between you and your keyboard. The space bar on the keyboard should be directly in front of the control pad, as shown in figure 1.
If you have a low keyboard, unfold the keyboard support from underneath your Mousetrapper and place the keyboard on top of it.
Scrolling
To scroll using the control pad, place your finger on the right edge of the control pad. There is no need to press on the control pad, simply slide your finger up or down the edge, depending on which way you want to scroll.
Replacement of pads
The pads can be replaced when they are worn out. To remove a pad, insert a flat tool between the frame and the Mousetrapper and gently prise the frame/pad out of the Mousetrapper. You can order new pads via your dealer or directly from Mousetrapper.

Customizing

MT Keys
To customize the button functions, go to mousetrapper.com/mtkeys and download the software.
If you have Windows 10, you can download MT Keys from Microsoft Store.
NOTE: In order to use MT Keys, the cable must be connected.
When you have downloaded MT Keys, an image of the product will appear that matches the image underneath your Mousetrapper. Position the cursor over the button you want to customize. Click on it by lightly pressing on the control pad once. You will now see a pull-down menu that lets you assign whichever action you want to that button. You can choose between functions such as adding an extra left-click, creating shortcuts, and inserting text by pasting it in.

mousetrapper.com

DISCLAIMER AND LIMITATION OF LIABILITY
This product (the Product) has been manufactured by or on behalf of Trapper Data AB, Swedish Reg. No. 556872-7597 And its group companies (Trapper Data). As between Trapper Data and the user, the following shall – to the fullest extent permitted by applicable law – apply: The Product is provided “as is” without warranty of any kind (either express or implied), including but not limited to any implied warranties of merchantability and fitness for a specific or general purpose and those arising by statute or by law, or from a cause of dealing or usage of trade. Trapper Data shall have no obligations whatsoever to repair, replace or service the Product in any manner or to provide the user with any future upgrades to the Product if any. The user is solely responsible for the use of the Product. In no event, regardless of cause, shall Trapper Data be liable for any direct, indirect, special, incidental, punitive, or consequential damages of any kind, whether arising under breach of contract, tort (including negligence), strict liability or otherwise, and whether based on agreement or otherwise, even if advised of the possibility of such damages. Trapper Data makes no claim or representation that the Product will prevent, cure, or mitigate any medical condition, disease, injury, pain, or discomfort for all users.