SOUNDPEATS TrueAir2+ Wireless Earphones User Manual

: June 5, 2024
: SoundPEATS

SOUNDPEATS TrueAir2+ Wireless Earphones User Manual

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Pairing

The earbuds automatically pair to each other after being taken out from the charging case. Light on main flashes in white and red, the second earbud stays in white.
Activate Bluetooth on the device and choose “SOUNDPEATS TrueAir2+” on Bluetooth list to pair.

Reset

(Try the following steps if you fail building connection between two earbuds, or between earbuds and device.)

Clear the pairing record between the earbuds and all your devices.
Place back both earbuds and make sure they are in charging status. Press and hold both MFBs for 10 seconds until both indicators flash in white twice.

Wearing

Product Diagram

Button Control

Power On| Auto: Take out from charging case

Manually: Press and hold the MFB for 1.5s

---|---
Power Off| Auto: Place back into charging case

Manually: Press and hold the MFB for 10s

Play / Pause| Double tap the MFB
Volume –| Single tap the left MFB
Volume +| Single tap the right MFB
Previous Track| Press and hold left MFB for 1.5s
Next Track| Press and hold right MFB for 1.5s
Answer / Hang up Phone Call| Double tap the MFB
Reject Phone Call| Press and hold the MFB for 1.5s
Switch Between Two Calls| Press and hold the MFB for 2s
Manually Enter Pairing Mode| Press and hold the MFB for 6s
Activate Voice Assistant| Triple tap the right MFB
Game Mode| Triple tap the left MFB

Game Mode

SOUNDPEATS TrueAir2+ adopts the latest technology to ensure low latency in game mode and make sure the sound sync with the image.
Triple tap on the left to activate the game mode with a voice prompt “Game Mode” and deactivate the mode with a prompt “Exit Game Mode”.

Q&A

Q1: What does the charging LED tell while charging the case?
The LED stays on while charging and turns off after fully charged.

Green light	50%-100%
Yellow light	10%-49%
Red light	Less than 10%

The LED flashes slowly while charging the case.

Red light	Less than 20%
Yellow light	20%-69%
Green light	70%-99%
Green light stays on	100%

Q3: How to charger the case?

Use a Type-C adapter to charge the case (current not over 1A). The LED stays on while charging.
Please charge the earbuds and case at least once per 3 months when not in use for a long time.
If the charging case supports charging via a wireless charging pad, please put it on a pad. Charging starts with LED light up and stay on.

Q4: Why are the earbuds still connected to my phone after placing back?

The charging case is out of battery. The case will not turn off the earbuds if the case battery is dead.
Please make sure the earbuds wit well in the charging case, and the charging contactors om both the earbuds and charging case are clean. If not, please try something like microfiber cloth to clean the contactors.

Q5: The battery life is not as advertised?

A single charge will not give you 25 hours playtime constantly. The earbuds work around
5 hours per charge with average use. The charging case provides another 4 recharges

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty

conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

FCC Statement

This equipment hos been tested and found to comply with the limits Of Class B digital device. pursuant to Port 15 of the FCC rules. These limits ore designed to provide reasonable protection against harmful Interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However there is no guarantee that Interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which con be determined by turning the equipment off and on. the user is encouraged to try to correct the Interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment Into on outlet on o circuit different from thot to which the receiver is connected.
Consult the dealer or on experienced radio/TV technician for help.

This device complies with port 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including Interference that may cause undesired operation.
Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.

Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN: 27082440

Subject of the declaration:

Title: Wireless earbuds
Model / Type: TrueAir2+

The above product has been tested in accordance with the standard(s)

used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.