Yealink UVC50 USB PTZ Camera User Guide
- June 5, 2024
- Yealink
Table of Contents
Yealink UVC50 USB PTZ Camera
Package Contents
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in poor performance.
Installation
-
Put on a Flat Surface
You can put the UVC50 on the conference table, and make sure that the angle of inclination of the UVC50 is not more than 5 degrees to ensure proper operation. -
Mount on the top of the TV
Choose the following installation method when the thickness of the TV is between 1mm and 36mm.
If your UVC50 cannot be mounted on the top of the TV when the bracket has
reached the given location, remove the bracket, and then convert the direction
of the bracket. Refer to the following section for more information. Choose
the following installation method when the thickness of the TV is between 37mm
and 77mm.
If your UVC50
cannot be mounted on the top of the TV when the bracket has reached the edge
of the UVC50, choose another installation method. Do not pick up the bracket
which is connected with a UVC50, the UVC50 may fall down in this situation.
-
Mount on the Wall
The recommended height is 1.55m-1.85m above the ground.
-
Mount on the Ceiling
If you choose the ceiling-mounted installation, you need to purchase a bracket separately. The bracket must meet the following requirements:-
Bear the weight of at least 10.5kg (23.15 lb.) and the thickness must be between 2mm
(0.08 in.) and 3 mm (0.12 in.). -
Comes with a location pillar, which can be inserted into the location hole of the VESA accessory.
-
The distance between the screw on the bracket and the location pillar must be 14 mm (0.55 in.).
-
-
Mount onto a TV Stand or a Tripod
You need to purchase a TV stand or a tripod separately. The TV stand or the tripod has the same requirements as the bracket used when mounting the UVC50 on the ceiling.
The installation steps are the same as the steps of mounting on the ceiling.
Cable Ties Installation
Hardware Interface Instructions
- USB: insert DD10 to connect to CPW90
- Microphone(optional): connect to VCM34
- Video Out: connect to a PC as video output
- Line In: connect to an audio input device using an audio cable (3.5mm)
- Line Out: connect to an audio output device using an audio cable (3.5mm)
- DC48V: connect to the power adapter
- Reset: reset the UVC50 to factory defaults
- Security slot: connect a universal security cable to the UVC50 so that you can lock the UVC50 down.
Connection
The priority of the audio input channel is Microphone(VCM34) >USB(CPW90)>line- in. The cable should be replaced at once if its skin is broken.
LED Indicator Instructions
LED indicators on the UVC50:
| LED Status | Description |
|---|---|
| Solid green | The UVC50 is active. |
| Solid red | The UVC50 is in sleep mode. |
| Solid orange | The UVC50 is initializing. |
| Flashing orange | The UVC50 is upgrading firmware. |
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +32 to 104°F (0 to 40°C)
- Relative humidity: 5% to 90%, noncondensing
- Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in
accordance with the operating instructions and the system environment. We are
not liable for damage or loss resulting from the use of this product, or for
any claim from a third party. We are not liable for problems with Yealink
device arising from the use of this product; we are not liable for financial
damages, lost profits, claims from third parties, etc., arising from the use
of this product.
Explanation of the symbols
To avoid the potential effects on the environment and human health as a result
of the presence of hazardous substances in electrical and electronic
equipment, end users of electrical and electronic equipment should understand
the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
All adapter devices comply with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting
support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
- Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
- During the process of storage, transportation, and operation, please always keep the device dry and clean, and avoid collisions and crash.
- Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
- Please refer to the relevant laws and statutes while using the device. The legal rights of others should be respected as well.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
- Keep the device dry and free of dust.
- Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials.
- Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
Operating Requirements
- Do not let a child operate the device without guidance.
- Do not let a child play with the device or any accessory in case of accidental swallowing.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
- Before plugging or unplugging any cable, make sure that your hands are completely dry.
- Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
- During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid a lightning strike.
- If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
- When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately.
- Contact the specified maintenance center for repair.
- Do not insert any object into equipment slots that is not part of the product or auxiliary product.
- Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
- Before cleaning the device, disconnect it from the power supply.
- Use a piece of soft, dry and anti-static cloth to clean the device.
- Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to devices other than the Yealink device. There is a bad connection with the plug.
- Clean the plug with a dry cloth.
- Connect it to another wall outlet.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s license-exempt RSS. Operation is
subject to the following two conditions:
- this device may not cause interference; and
- this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North
Road, Huli District, Xiamen City, Fujian, P.R. China YEALINK (EUROPE) NETWORK
TECHNOLOGY B.V.Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX
Amsterdam, The Netherlands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999
Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China
About Yealink
Yealink is a global leading provider of enterprise communication and
collaboration solutions, offering video conferencing services to worldwide
enterprises. Focusing on research and development, Yealink also insists on
innovation and creation. With the outstanding technical patents of cloud
computing, audio, video and image processing technology, Yealink has built up
a panoramic collaboration solution of audio and video conferencing by merging
its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and
Australia, Yealink ranks No.1 in the global market share of SIP phone
shipments.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware,
guides, FAQ, Product documents, and more. For better service, we sincerely
recommend you to use the Yealink Ticketing system
(https://ticket.yealink.com) to submit all your technical issues.
References
- Yealink Support
- Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
- Yealink Ticket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>