Star Hanger 325 Zero Side Mount Booth Installation Guide
- June 3, 2024
- Star Hanger
Table of Contents
325 ZERO SIDE MOUNT,
BOOTH INSTALLATION GUIDE
325 Zero Side Mount Booth
| 
---|---
Required Tools; 325 Zero Side Mount, 330 Alignment Pins, 913 Pilot Drill 5MM
Center Point Drill & Stop| The 325 Zero Side Mounts can be used to install the
removable booth seating. Install the Zero Side Mounts flush with the
intersecting panel edge.
|
Install the 330 Zero Alignment Pins for marking the 334 Mounting Screw
locations.| Firmly push the panels into place to mark the 334 Mounting Screw
locations. Install the mounting screws using a 913 Brad Point Drill Bit, 5mm.
|
Other components can also be installed using the 325 Zero Side Mount.| The
upholstery snaps into place and is removable with about 25 pounds of force, a
small pry bar helps.
“Hidden Fastener Specialists”
www.starhanger.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>