Star Hanger Systems Wall Panel (pdf) 420 S Clip & Long Bars Installation Guide
- June 3, 2024
- Star Hanger Systems
Table of Contents
Wall Panel (pdf) 420 S Clip & Long
Bars
Installation Guide
“Hidden Fastener Specialists”
www.starhanger.com
Wall Panel (pdf) 420 S Clip & Long Bars
| 
---|---
Required Tools; 420 S Clip, 421 S Alignment Clips, Panel
Adjuster, 1/32” plastic laminate, Spray Contact Cement,
Panel Adhesive.| When using pre-engineered, field-verified, CNC-cut furring,
the
panel clips are pushed firmly to the bottom of the clip pocket.
| 
Full-size furring sections can be pre-glued and shimmed
into place.| Install the corner furring sections to the field control lines.
| 
Level and square the corner furring sections with shims
and screws as required.| Use a string line to straighten the pre-cut furring.
(Tip: If you have per-glued the furring panels, you need to work quickly.)
| 
Carefully position your panel over the 421 S Alignment
Clips and push them firmly enough to leave a location mark for the mounting
screws.| Pre-drill with a 1/16” drill on the back side of the panel at each
location mark.
| 
Insert supplied screws.| Lift the panel into place about 1/2” above marks, and
push in and down firmly to lock the panels into their final position.
| Finished paneled wall.