Star Hanger 325 Zero Side Mount ADA and Soffit Installation Guide
- June 3, 2024
- Star Hanger
Table of Contents
Star Hanger 325 Zero Side Mount ADA and Soffit Installation Guide
Required Tools; 325 Zero Side Mount, 330 Alignment Pins, 913 Pilot Drill 5MM
Center Point Drill & Stop.
Install both your wall rails with heavy duty self-tapping screws
being sure to hit the steel studs. Lock each shop built gusset plate into
position and secure each gusset plate with angle brackets.
Install the 452 “L” Brackets onto gusset plates.
Install the 330 Zero Alignment Pins to help mark the locations for the 334 Mounting Screws.
Press each panel into the Alignment Pins to mark the 5/16″ Mounting Screw locations.
Completed ADA unit can be installed in about 30 minutes.
The 325 Zero Side Mounts can be used to install wall cabinet
soffits quickly.
Install wall gussets above the wall cabinets with the 325 Zero Side Mounts pre-installed. The gussets can be installed by simply sitting them in beads of panel adhesive and allowed to dry overnight.
Install the 330 Zero Alignment Pins and press the panels firmly into place to mark the 334 Mounting Screw locations.
Push the soffit firmly against the 330 Zero Alignment Pins to mark the 334 Mounting Screw locations.
The completed
soffits above the cabinets can be removed for later access.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>