somfy SOC Outdoor security Camera white User Guide

somfy SOC Outdoor security Camera white

Box Content

• Outdoor Camera and wall plate
• Allen Key
• Wall screws and screwholders (x2)
• Tool for reset

What You’ll Need

• Wi-Fi connection (500 kbps upload speed recommended)
• Drill
• Step ladder
• Hammer and Phillips screwdriver

IMPORTANT
If you want to connect the camera to an existing light or socket, you will need additional power cables.

Somfy Outdoor Camera

1. Motion sensor
2. Microphone
3. Full HD video sensor (1080p / 130°)
4. Speaker
5. IR LED – Night Vision
6. 110 dB Siren
7. Status LED

Camera Wall Plate

1. Electrical terminal block
2. Cable duct
3. Securing holes
4. Security Screw
5. Connection to electrical power supply
6. Connection to existing lighting

Where to Install it

Wi-Fi: Use your smartphone to check that Wi-Fi is available at the selected location.
Location: For best operation, avoid direct exposure to the sun or rain. Ensure that the field of view of the camera is unobstructed.
Height: The camera should be positioned between 2 m and 3 m above ground level. For best detection quality, position it at a height of 2.50 m. Secure it on a vertical surface.

3 Ways of Installing it

Connecting to an electrical power cable

1. Put the mounting plate in its final position and mark the holes. Drill and insert the screwholders provided. Do not secure the mounting plate for the moment.
2. Uncoil the electrical power cable. Connect the blue wire (NEUTRAL) to the terminal marked N and the brown wire (LIVE) to the terminal marked L on the left of the terminal block. The earth wire (GND) is not needed.

Connecting to an existing light fixture

1. Put the mounting plate in its final position and mark the holes (see instructions on page 8). Drill and insert the screwholders provided. Do not secure the mounting plate for the moment.
2. Remove the light fitting and release the power cable. Ensure you have an outdoor power cable for the camera. Connect the blue wire (NEUTRAL) to the terminal marked N and the brown wire (LIVE) to the terminal marked L on the left of the terminal block. The earth wire (GND) is not needed.
3. Obtain another outdoor power cable to power the light fixture. Connect the blue wire (NEUTRAL) to the terminal marked N and the brown wire (LIVE) to the terminal marked L on the right of the terminal block. The earth wire (GND) is not needed.
4. You can then reinstall the light and reconnect the earth (GND)  wire. We recommend that you protect the cable connecting the camera to the light with a duct or conduit.
   Warning: Ensure that the switch for the light controlled by the camera cannot be operated.

Connecting to an electrical power socket

1. Choose a close and accessible power socket. Put the mounting plate in its final position and mark the holes (see instructions on page 8). Drill and insert the screwholders provided. Do not secure the mounting plate for the moment.
2. Obtain a power cable made for outdoor to connect the left part of the terminal block to the camera. Connect the blue wire (NEUTRAL) to the terminal marked N and the brown wire (LIVE) to the terminal marked L on the left of the terminal block. The earth wire (GND) is not needed.

Securing the Camera

1.  Secure the wall plate to the wall with the screws provided.
2.  Clip the camera to the wall plate. Secure it with the security screw.
3.  When using a power cable, do not rest any object on its surface, and lay it away from areas where people pass through.

Finalizing the Installation

Switch the mains’ power back on. After a few seconds the camera will start up automatically and a blue LED will flash. Now connect to the «Somfy Protect» app to finalise the installation.

Technical Information

Video Full HD video sensor 1080p | Wide angle 130° (diagonal) | Night vision (8 m) with mechanical infrared filter | Digital zoom x8 | SomfyVision™ motion detection (up to 8 m) Connectivity Wi-Fi 802.11 b/g/n Open/WPA/WPA2-Personal /WPA-WPA2 mixed mode (2.4 GHz, e.r.p < 100 mW) | 500 Kbps (HD) or 1200 Kbps (Full HD) upload recom-mended Bluetooth LE (2.4 GHz, e.r.p < 100 mW) Audio Built-in speaker and microphone Siren 110 dB Power Supply 110-230 V AC, 50-60 Hz, 4.8 A Max | Protected by a 10 A or 16 A circuit breaker and 0,03 A Residual Current Protective Device (RCD) | Powered by electric cables of at least 1.5 mm2 | Max power supported lighting : 500 W (Halogen) or 100 W (LED) Size / Weight 150 x 150 x 85 mm / 512 g Operating temperature from -20°C to 50°C | IP54 weather resistant Secure connection Video feed secured with SSL/TLS 2048-bit encryption and cloud storage with AES-256 encryption

Support & FAQs
www.somfyprotect.com/support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>