Shark SHKC7800N 2000W 4.1 Channel Motorcycle Marine Audio Speaker User Manual
- June 5, 2024
- Shark
Table of Contents
SHKC7800N 2000W 4.1 Channel Motorcycle Marine Audio Speaker
User Manual
Please read this manual carefully before operating the amplifier. Retain it
for future reference. Operation of the amplifier is very easy, simply press
the button on the amplifier, wired remote or wireless remote.
Safety is the most important, the following you must comply with:
- Always operate the vehicle in a safe manner. Do not become distracted by the amplifier while driving, and always be fully aware of all driving conditions. Minimize the amount of time spent viewing the screen of the amplifier while driving. Do not insert a USB disk, SD card, or AUX cable into a cellphone, or connect Bluetooth to a cellphone while driving. Pull over in a safe place before attempting such operations.
- Do not kink or crease the power cable or place heavy objects on the power cable, Fire can result from the damaged power cable.
- Immediately power off the amplifier and unplug the power cable, if smoke or odors emit from the amplifier.
- Note that malfunction may occur if you use the amplifier in places where static electricity occurs frequently.
- Never attempt to open and repair the amplifier yourself.
- Please use the power cable that the amplifier provided, otherwise the amplifier may be damaged.
- Do not use it for many hours at extremely low or high temperatures.
- Please power off the amplifier before moving it.
- Please put the power cable, AUX cable, external antenna wire, and speaker cable in a suitable place to avoid any accident when you driving.
Accessories:
Amplifier—- 1PC
Wired remote control—-1PC
Externa antenna—1PC
Wireless remote control—-1 PC
Power cable—-1 PC
AUX-In Cable—1PC
The waterproof case–1 set
Name of the components and functions:
Amplifier
Front Panel of SHKC7800N
►/ **Pause (Long press to auto scan and save FM radio stations)
MODE: long press to Power ON/OFF, short press to change the mode from
USB, SD, FM, Bluetooth, Line in. 144.
: Last song/ last station : Next Song/ next station **: Volume + **:
Volume-
USB: to play USB disk from 128M to 4G.
Screen: to display different modes.
SD: to play SD card from 128M to 4G.
AUX: Line-in, to connect the audio cable to mp3, cellphone, CD,ect.
IR: to receive a signal from the wireless remote control.
BT: Bluetooth light (red light flashes slowly when connect to Bluetooth)
and Power light (red light when turned on).
Back Panel of SHKC7800N**
BT: install an external antenna to BT to get a better Bluetooth signal
within 10 meters
AT: Install an external antenna to AT to search stations of FM radio
DC10-16V: connect the power cable to motorcycle battery( power cable red
color to + of battery and black color to – of battery)
RE: to connect wired remote control.
R-SP: Right speaker, to connect full-range loudspeaker.
L-SP: Left speaker, to connect full range Loudspeaker.
Wired Remote Control:
- Power ON/OFF, Mode key: long press to power on/off, shod press to change the mode from USB, SD, FM, Bluetooth, Line in.
- Volume –
- Last song/ last station
- Volume+
- Next song /next station
- Pause (Long press to auto scan and save FM radio stations), shod press for pause.
Wireless Remote Control:
- Power key: short press to turn on/off the amplifier
- Mode: short press to change the mode from USB, SD, FM, Bluetooth, or Line in.
- Mute.
- Pause: (Long press to auto scan and save FM radio stations), short press for pause.
- last song /last station, next song /next station
- EQ: short press change from 1.CLS 2. NOR,3.POP,4.ROCK,5.JAZZ,6.COWN ( only work on the mode of USB and SD to play U disk or SD card), defaulted the EQ mode which is adjusted by U disk or SD card when played by Bluetooth or AUX input.
- Volume-/ Volume+
- RPT: to choose “A”(repeat play by all), “F”(repeat play by disk), “1”(1st song repeat play ), “R”(Radom play)
- U/SD: short press to choose to play by U disk or by SD card
- Numbers: 0 to 9 for chosen song: For example: if you want to play the 19th song on a U disk or SD card, you just press 1 and 9.
Screen Display:
|
---|---
1. Shark logo will be displayed when the amplifier is powered on.| 2. It
will load.
|
3. If insert U disk and SD card, it will show U disk (MP3 Mode), total songs
on U disk, to play the second song, song name, U disk Root, EQ mode, repeat
mode, and playtime.| 4. Short press the power /mode key, change it to play SD
card, and it will show (MP3 Mode), total songs on u disk, to play the second
song, song name, EQ mode, repeat mode, and playtime.
|
5. Short press the power /mode key, and change it to play AUX in| 6. Short
press the power /mode key, and change it to play FM radio Mode, it will show
FM radio Frequency, stations
|
7. Short press the power /mode key, change to Bluetooth, and it will have
voice instructions ” The Bluetooth device is ready to pair, open your
Bluetooth device to search amplifier Bluetooth name “SHKC7800N”, press
connecting, you will hear voice instruction “two devices are connected
successfully”| 8. Long press the power /Mode key, it will show ” GoodBye” to
turn off the amplifier.
Different EQ modes sceen display press the “EQ” key on the wireless remote
control to change “NOR” “POP” “CLAS” “JAZZ” “COWN” and “ROCK”.
Different Repeat
mode display: Press the “RPT” key on the wireless remote to change “A” “F” “1”
“R”.
FEATURES: SHKC7800N
Built-in Bluetooth
Built-in FM Radio (Frequency 87 to108MHz)
USB&SD slot audio input
3.5mm AUX input
High-quality big size LCD Screen to display different modes, song names,
EQ,ect.
Full functions high-quality wired remote control and wireless remote control
4.1ch/4ch/2ch/ stereo channels to connect the full-range loudspeaker
External marine grade antenna! to connect AT and BT for a better signal of FM
radio and Bluetooth
SPECIFICATIONS:
SHKC7800N 2000W
Working Voltage: 10-16V DC RMS
Output: 4CH150W+300W MAX
Output: 4CH300W+800W
THD: <01% S/N:>50dB
Channel Separation: >50dB Frequency
Response: 20Hz-20kHz
Sensitivity: 150mv Fuse
Rating: 20A
3-inch Loudspeaker Specification
Working Voltage: 10-16V DC Voice
Coil Impedance: 4 0 Response
Frequency Range: F0-12kHz
Input Sound Pressure Level: 88dB
Rated Input Power: 80W Max
Input Power: 300W
Distortion: <.5%
Installation of wired remote control:
| 
---|---
Step1: screw off the rod on the handlebar bracket| Step2: Open the bracket and
install it on the motorcycle handlebar (adjust the rubbles according to the
diameter of the handlebar)
| 
Step3: tighten the screw| Step4: Insert the wired remote control into the
handlebar bracket.
Installation of amplifier and speakers:
There are many ways to install an amplifier, such as under the seat of a
motorcycle, car, jet ski, ATV, etc, putting into a saddle bag, sticking to the
front resting place of a motorcycle, ect. 
WARRANTY POLICY
We offer a 60-day money-back guarantee from the date of purchase. Please save
the original box and return the item in perfect condition, or a restocking fee
will be charged. We warranty all items regardless of where it was purchased
for 1 year. Please save the Invoice as the warranty certificate.
NOTE: All damages caused by NOT obeying the USER MANUAL are not in
warranty.
Please visit our website:
www.sharkmotorcycleaudio.com for more
information!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>