KLARSTEIN 10028924 Creamberry Ice Cream Maker Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN 10028924 Creamberry Ice Cream Maker Instruction Manual
Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.
TECHNICAL DATA
- Item number 10028924, 10028925
- Power supply 220-240 V ~ 50-60 Hz
- Power consumption 7,3 – 9,5 W
SAFETY INSTRUCTIONS
- Read all the safety and operating instructions carefully and retain them for future reference.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not upend this product or incline it over a 45° angle.
- To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Keep the appliance 8 cm from other objects to ensure the good heat releasing.
- Do not use the accessories which are not recommended by Manufacturer.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance close by flames, hot plates or stoves.
- Do not switch on the power button frequently (ensure 5 min. interval at least) to avoid the damage of compressor.
- Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
- When take out the ice cream, do not knock the barrel or edge of barrel to protect the barrel from damage.
- Do not switch on the power before install well the barrel or blender blade.
- The initial temperature of the ingredients is 25±5°C. Do not put the ingredients into freezer for pre-freeze, as it will easily make the blender blade blocked before the ice cream is in good condition.
- Do not remove the blender blade when the appliance is on working.
- Do not use outdoors.
- Never clean with scouring powders or hard implements.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended to be used in household and similar applications.
Special Notes
- When positioning the unit, make sure that the power cord is not pinched or damaged.
- Make sure that there are no multiple sockets or power supplies on the back of the unit.
To avoid contamination of food, please follow the instructions below:
- Regularly clean surfaces that may come into contact with food.
WARNING
When using, servicing and disposing of the unit, pay attention to the left
symbol on the rear of the unit or on the compressor. This symbol warns of
possible fi res. There are flammable substances in the refrigerant lines and
in the compressor. Keep the appliance away from sources of fi re during use,
maintenance and disposal.
PRODUCT OVERVIEW
- Power unit
- Lid
- Paddle
- Inner bowl
- Outer bowl
BEFORE FIRST USE
- Remove all of the packaging.
- Wash the parts: see “Cleaning and Care”.
- Eight hours in advance, place the inner bowl into a freezer.
- Prepare the ice cream or sorbet mix (see „Recipes“). Allow the mix to cool in the refrigerator.
USE AND OPERATION
-
Fit the power unit into the lid, It will click into place.
-
Fit the paddle into the power unit.
-
Take the inner bowl from the freezer and put it into the outer bowl.
-
Lower the assembled lid/power unit/ paddle onto the bowl and It will click into place.
-
Insert the plug into outlet,and a “beep” can be heard immediately.The running time” 20:00” is indicated automatically on LCD.
-
Each time the Reset button is pressed, the running time is added one
minute with a “beep” in sequence:
-
You can choose the running time from 20 minutes to 40 minutes. Each time the Power button is pressed, the machine is changed with a “beep” in sequence.
-
Press the Power button after the running time is set.The machine is turned on , the remaining time “XX:XX” is indicated on LCD and counts down at once.
-
Before adding the mixture you can stop the machine and reset the running time again that you want.
-
Use the chute and pour the ice cream or sorbet mix into the inner bowl. When pouring mixture into the bowl, always stop at least 5 cm (2 inch) from the top, as the mixture will increase in volume during freezing.
-
Allow the mixture to churn until frozen or the desired consistency is reached. This can take up to 15 to 30 minutes, but most recipes will be ready in less time.
Important Notes on Use
- Do not stop and start the machine during the freezing process, as the mixture may freeze in contact with the bowl and prevent movement of the paddle.
- To avoid overheating the motor, the direction of rotation will change if the mixture becomes too thick. If the direction of rotation continues to change, stop the machine when the mixture is ready.
- In the unlikely event of the motor overheating, a safety cut out will operate causing the motor to stop. If this happens, unplug the machine and allow the power unit to cool.
- For the best result of ice cream, the paddle will contact with the inside of the inner bowl when the paddle moves.
- When the setting time is over, the machine is stopped automatically, unplug the machine and remove the power unit/lid. The ice cream is ready to serve.
- The ice cream produced should be a soft spoonable type. This can be transferred to a separate container for storage in the freezer or if you wish to firm the ice cream before eating.
- Do not use metal utensils to remove mix from the bowl.
Important Notes on Use of the Inner Bowl
-
Do not remove the inner bowl from the freezer until ready to make ice cream..
-
We suggest that you keep the inner bowl in the freezer so that it is ready for use.
Place in a plastic bag before freezing. Freeze the inner bowl in the upright position. -
Always make sure the inner bowl is thoroughly dry before placing in the freezer.
-
Do not puncture or heat the inner bowl.
-
The inner bowl should be placed in a freezer that is operating at a temperature of -18 °C or below for 8 hours before use.
-
For best results always refrigerate the ingredients before making ice cream.
-
The addition of alcohol to recipes inhibits the freezing process.
CLEANING AND CARE
Important Hints on Cleaning
- Always switch off, unplug and dismantle before cleaning.
- Never put the power unit in water or let the cord or plug get wet.
- Do not wash parts in the dishwasher.
- Do not clean with scouring powders, steel wool pads, or other abrasive materials.
Inner Bowl
Allow the inner bowl to reach room temperature before attempting to clean.
Take out the inner bowl and wash the inside of the bowl, then dry thoroughly.
Do not immerse in water.
Outer Bowl
Wash then dry thoroughly.
Paddle
Remove the paddle from the power unit. Wash then dry thoroughly.
Lid
Wash the lid then dry thoroughly.
Power unit
Wipe with a damp cloth, then dry.
TROUBLESHOOTING
Problem | Possible Cause | Solution I |
---|
The ice cream maker does not
work.
| There is a power failure. A house fuse has blown.| Ensure the maker is
plugged in and the power socket is turned on.
Ice cream maker can not finish the
ice cream.
| The maker is placed too close to a heat source. No sufficient ventilation.| Keep the cooler away from sunshine or other heat sources.
Place the ice cream maker in good ventilation and keep any items away from the fans.
The lid is opened too frequently or for a long period of time.| Close the lid tightly and do not open the lid too frequently in operation.
RECIPES
Banana Ice Cream
Ingredients
1 Large ripe banana
200 ml Skimmed milk
100 ml Heavy cream
50 g Confectioner’s sugar
Preparation
Mash the bananas until smooth. Mix in the milk, heavy cream and sugar. Pour the mixture into the freezer bowl with the paddle running. Allow to freeze until the desired consistency is achieved.
Raspberry Frozen Yoghurt
Ingredients
200 g Fresh raspberries
100 g Confectioner’s sugar
200 ml Natural yoghurt
Preparation
Mash the raspberries or puree them. For a smooth result remove the pips by sieving. Add the sugar and natural yoghurt and mix together. Pour the mixture into the freezer bowl with the paddle running. Allow to freeze until the desired consistency is achieved.
Chocolate Mint Ice Cream
Ingredients
200 ml Skimmed milk
50 g Confectioner’s sugar
200 ml Heavy cream
Peppermint extract
Grated chocolate
Preparation
Place the milk and sugar into a saucepan. Place over a low heat and stir until the sugar has dissolve, then leave until cold. Stir the cream and a few drops of the peppermint essence into cooled milk. Pour the mixture into freezer bowl with the paddle running. When the mixture starts to freeze add the grated chocolate down the chute. Allow to freeze until the desired consistency is achieved.
Strawberry Ice Cream
Ingredients
250 g fresh strawberries
100 g Confectioner’s sugar
100 ml Heavy cream
Juice from 1/2 small size lemon
Preparation
Puree the strawberries until smooth, add the remaining ingredients. Pour the mixture into the freezer bowl with the paddle running. Allow the mixture to freeze until the desired consistency is achieved.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Erlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>