KLARSTEIN PASTAMANIA Pasta Maker User Manual

KLARSTEIN PASTAMANIA Pasta Maker

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

SAFETY INSTRUCTIONS

•  Do not use the device for purposes other than those described in this operating manual.
•  Before use, check the voltage on the device badge. Only connect the device to sockets that correspond to the voltage of the device.
•  Do not leave the unit unattended during operation.
•  Only use this appliance for domestic purposes. This appliance is not intended for professional use. This equipment is not intended to be used in any manner that is likely to be of a professional nature.
•  If possible, do not use an extension cord. If you do use one, make sure that the amperage of the connected device does not exceed the maximum amperage of the power cord. Do not use more than one extension cord at a time.
•  Do not use this unit with wet or damp hands.
•  Always unplug the appliance from the wall outlet before cleaning.
•  Unplug the appliance from the wall outlet when it is no longer in use. Switch off the appliance before removing the plug from the socket.
•  Do not pull the plug out of the socket by the cable, but hold it firmly by hand when pulling it out.
•  Children 8 years of age and older, mentally, sensory and physically impaired persons may only use the device if they have been thoroughly familiarised with its functions and safety precautions by a supervisor responsible for them and understand the associated risks.
•  Do not connect the device to external timers or remotely controlled sockets.
•  Keep the appliance away from water. If it falls into the water, immediately unplug the appliance from the wall outlet. Only then can you safely remove the appliance from the water. Do not use the appliance near containers with liquids, taps, washbasins or bathtubs. Do not immerse the appliance in water or any other liquid. Do not wet the plug. Do not handle the appliance with wet hands while it is plugged into the wall outlet. Do not use the appliance if it has accidentally become wet or damp.
•  Use of non-original accessories may result in injury to third parties or to the user and may affect the operation of this equipment.
•  Use of the product without original accessories or improperly assembled parts will void the warranty on the product.
•  Improper and inaccurate use may damage the unit and result in injury to the user.
•  Do not hold or lift this device by the cable.
•  Do not twist or bend the cable or wrap it around the product.
•  Lay the power cord so that it does not come into contact with sharp edges.
•  Repairs must be performed by qualified service personnel only and are required if the apparatus has been damaged, power cords or plugs are damaged, liquid has been spilled or objects have fallen on the apparatus, the apparatus has been exposed to moisture or moisture, has been dropped or is not operating normally.
•  Do not use this appliance in outdoor areas such as terraces, pavilions, balconies, granaries, stables, or similar places.
•  Do not expose this product to prolonged exposure to sunlight as this may cause discoloration of the housing.

Operating Instructions

•  Avoid touching moving parts during operation. Keep hands, hair, clothing, spatulas and other utensils away from moving parts during operation.
•  Do not touch the parts while the unit is connected to the power circuit. Always unplug the appliance before assembling or cleaning.
•  Before each use, check the power cord, plug, mixing bowl, mixing shaft, and other removable parts for damage. If any parts are damaged, contact your dealer. Do not attempt to repair the parts yourself.
•  Make sure that the removable parts are in the correct position before connecting the power supply.
•  Do not use the microwave to disinfect the components as this may cause deformation and damage.
•  Do not place the appliance in water or any other liquid and do not rinse it with water or any other liquid.
•  Do not clean the product with steel wool, abrasive cleaners, or corrosive liquids.

CAUTION
Risk of injury! Never reach into the device with your fingers or an object while it is running. If the parts are stuck, unplug the appliance before attempting to remove the ingredients that block the knives.

PRODUCT OVERVIEW

ingredients

| 9| Drawer for storing the extruder discs.

3

| Mixing axis for mixing and kneading flour and water or other ingredients and for making pasta| ****

10

| ****

Housing with motor assembly and

digital electrical components.

4| Extruder pipe for producing and kneading dough| 11| Flour measuring cup to measure

the flour

5

| ****

Extruder axis for processing dough

| ****

12

| Water measuring cup for measuring water, vegetable juice and mixtures of egg and water

6

| Locking nut for locking the extruder discs for pasta production| ****

13

| Spatula for smoothing flour when measuring, cutting pasta and cleaning extruder slices.
7| Fixing nut for fixing the front panel to the main body| |

Extruder discs

ASSEMBLY

Note: Before assembling, turn off the power and unplug the appliance from the wall outlet.

OPERATION

Control Panel

Switching on and off the device

•  As soon as the device is connected to the mains, a signal tone sounds. The indicator [88:88] flashes on the display and then disappears.
•  If you press the ON/OFF button during operation, the unit stops without a display.

Automatic function

•  Press 1 CUP (1 cup of flour), 2 CUP (2 cups of flour) or 3 CUP (3 cups of flour) depending on the amount of flour.
•  The display shows the countdown time.
•  The machine starts. If function 2 CUPS or 3 CUPS is selected, the dough is kneaded for 3 minutes. When function 1 CUP is selected, the dough is kneaded for 4 minutes.
•  When the pasta is ready, the machine stops automatically and [OFF] appears on the display.

Manual function

When the automatic mode is finished, press the MANUAL button to eject the remaining dough. The countdown time for the manual function is 5 minutes. In manual mode, the machine automatically detects the density of the flour/water mixture. It is normal for the mixing axis to be reversed over and over again during the working process. If the display shows [E1] after repeated reversing, check whether the flour is too dry or if there are foreign objects inside. If there is no foreign matter inside, add the correct amount of water and after two minutes of mixing, select the MANUAL function. If the error message persists, turn off the power, clean the extruder disc, and check whether dough or other objects are obstructing it. Then reconnect the power. Normally, the machine should now run normally. If the machine is still [E1], contact a specialist company for inspection and maintenance. Do not add any non-liquid ingredients other than flour during the working process. Eggs must be mixed with water before adding. Do not open the top cover or unscrew any accessories while the appliance is in operation.

Measuring ingredients

Reference table for the flour and water content:

Flour| Water

Min – Max

| Vegetable juice

Min – Max

| Egg water mixture

Min – Max

---|---|---|---
3 CUPS| 160 ml – 170 ml| 170 ml – 180 ml| 180 ml – 190 ml
2 CUPS| 110 ml – 120 ml| 120 ml – 130 ml| 130 ml – 140 ml
1 CUP| 55 ml| 60 ml| 65 ml

Note: Eggs must be mixed with water before being added.

•  The maximum amount of flour is 480 g (3 CUPS), the added amount of water 170 ml (±10 ml deviation depending on flour moisture).
•  The minimum amount of flour is 160 g (1 CUP), he added an amount of water 60 ml (±5 ml deviation depending on flour moisture).
•  Always add the recommended amount of flour and water. Otherwise, the noodles are too dry or too wet, which may damage the unit.
•  Do not knead the dough until you have ensured that flour and water have been evenly mixed with the manual function. If the holes in the discs are blocked by dry flour, they may be damaged.

Note: This product is equipped with an intelligent control program. It stops automatically after the pasta is ready. If you wish to continue using the machine, wait 20-30 minutes for the motor to cool down.

Noodle production step by step

How to make ravioli

The machine is equipped with an accessory for the production of ravioli.

CLEANING AND CARE

Note: Switch off the appliance before cleaning and unplug the appliance from the wall outlet.

Clean the accessories immediately after pasta production with water and a mild detergent. Wash all parts that come into contact with flour with special care.

•  After you have cleaned the accessories, dry them carefully. Refit the parts to the unit. The extruder discs can be stored in the drawer. Store the unit in a place that is inaccessible to children, away from fire, moisture and direct sunlight.
•  Do not immerse the motor base in water or other liquids to avoid electric shock.
•  The dough residue in the mixing bowl and on the discs can be removed more easily when they are dry.

Cleaning the extruder discs

When the noodles are made, unscrew the lock nut, remove the washers and place them in a ventilated place for about 2 hours. After the dough has dried, gently tap the washer to remove it. Then wash it off with soap and a mild detergent.

TROUBLESHOOTING

The machine does not

produce noodles.

| Too much water: Take out the dough in the mixing bowl, tear it as small as possible, add the right amount of flour and press MANUAL.
Too little water: Remove the extruder slices used, clean them and reinsert them. Add the right amount of water and press MANUAL.
The dough is too wet or the flour too moist. Make sure that the flour is stored in a dry container. Adhere

exactly to the amount of flour and water specified in the

reference table.

The mixing bowl, mixing axis and extruder disc have not

been cleaned or dried before use.

The noodles crunch or

crack.

| The noodles have more burrs or cracks at the beginning and end of extrusion due to the mixture. Add eggs or some cooking oil to produce smoother noodles.
If you have time, you can rip the pasta dough into small pieces after extruding and back into the mixing bowl. Press MANUAL and extrud the dough again. The more often you repeat this process, the smoother the pasta will be.
At the end of noodle production, there is still some flour or dough left over.| First switch off the machine, remove the remaining dough and assemble it. After the dough has been put back into the mixing bowl, press the “Manual” button, the machine will continue extruding noodles.
The noodles stick together

after extrusion.

| After the noodles have come out, sprinkle some flour over them so that they do not stick together.
The noodles break.| Too little water in the dough. Follow exactly the amounts

given in the reference table.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK) 

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Ltd
PO Box 1145
Oxford, OX1 9UW
United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.
• Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>