Baseus PPCXW10 Magnetic Wireless Power Bank User Manual
- June 5, 2024
- Baseus
Table of Contents
Baseus PPCXW10 Magnetic Wireless Power Bank
Product Parameter
- Name: Magnetic Wireless Fast charging Power bank 10000mAh
- Model No.: PPCXW10-C
- Material: ABS+PC
- Capacity: 10000mAh/3.7V (37Wh)
- Rated Capacity: 5800mAh (5V-2.4A)
- Battery: Polymer Lithium battery
- Energy Conversion Rate: 75%
- Type-cInput: 5V-2.4A;9V-2A;
- Wireless Charging Output: 15W
- USBOutput: 5V-2.4A;9V-24;12V–L5A;
- Type-COutput: 5V-2.4A;9V-2.22A; 12V-1.5A;
- USB+Type-C Output: 5V-2.4A;
- Total Output: 5V-2.4A;
- Product size: 146.4×71.3×16.9mm
- Product weight: About 229g
Packing List
Product Description
This product Is a portable charging device that can provide wired or wireless charging tor mobile phones, tablets, e-books, Blame machines and other digital products. The product has the characteristics of two in one of wired charging and wireless charging. magnetic suction posting power digital display, iP 20W PD fast charging. through put (including wireless output) 15Wwirclcss fast charging etc. Product built-in FOD, overcharge, Over discharge, temperature protection and other safety protection Circuit.
Operation description
The power button operation instructions For viewing electric quantity Press the button once to initiate the power output function, when you can view the remaining electric level of the power bank. After lit for 30sec, the LED indicator will extinguisher automatically.
For charging the power bank
When the charging line matched with the mobile power intertace is connected to
charge the power supply, the power indicator lights up to show the current
power, which means that the connection is normal and the power supply is
chargcd. lf the power indicator docs not light up after connecting the
charging line, it means that the connection tails and there is no charging
please check whetherthe charging line is connected normally.
Operation for discharging by cable
Connect the USB charging cable to the corresponding output port of the power
supply, and the power supPly will automatically turn on thc Output. Duc to
compatibility probicms, somc smart phones need to press the key to turn on the
power output function, which is a normal prienomenon ana need not be ignorea.
Pres tie Key Once to suppy power totne external equipment. Press the key once
to output power for about 30 seconds. F there is no external load in 30
seconds, the power output will be automatically turned oft.
Operation for discharging by wireless
When the pover indicator lights up for about 30 seconds, the mobile phone vill
be charged for wireless chargingwithin 30 seconds. lf the mobile phone is
placed in the wireless charging area of the power supply, the mobile phone can
be charged for wireless charging. IF there is no wireless charging accesS
within 30 seconds ater one key, the product will automatically tum oft the
wireless charging tunction.
Wireless charging tips
The wireless charging mobile phone should be placed in the wireless charging
area of the product (the transmitting area of the wireless charging coil is
lustrated in the figure) forwireless charging. The wireless charging distance
is within8 mm. fthe distance exceeds 8 mm, the Wireless charging can not be
caied out. Please adjust the wireless charging distance within the WIreless
charging range.
How to charge this product
Charging this power bankby using power Adapter/PC USB port. When the original
USB cable is chosen for charging this power bank, you may also use lype-c
charging cable. The power bank is charged just by inserting t into the lype-C
port. Connect the USB connectorwith the Adapter or PC USB port, then LED
electric level indicator begins toflash, indicating this product is being
charged. The LED indicator becomes constantly litwhen it is fully charged.
Use this product to charge a mobile phone or other digital devices:
- Checkyour digital product for its charging voltage, and make sure it matches the output voltage of this product
- Use the original charging cable of yourdigital product. Connect one end of the cable with your digital product and the other end with the output port of this product. The wired output port of this product will be automatically initiated to charge your mobile phone or any other digital product, when the LED indicator becomes constantly lit.
- To charge a mobile hone with wireless chargingfunction, press the On/Of button once, and the LED indicator is lit. At this point, the power bank is supportive of wireless charging. Place your mobile phone with wireless charging tunction at the center on the side of the power pack bearing wireless charging mark to begin dharging your mobile phone, during which the LED indicator is constantly lit
Tips
Please read all instructions and wamings betore using this product. Non- standard use will damage the product or personal safcty.
- The charging.contact surface on the back of the mobile phone should not be covered with metal mateials, such as iron sheet, ring metal protective case, etc.
- When the mobile phone is charging,if intermittent chargingor serious heating is found, it may be that the receiving coil of the mobile phone is not completely aligned with the vwireless charging col, or there is metal foreign matter in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective sleeve, and then align it in the Correct poSition.
- Ihis product has over-current protection furnction. if the product is used improperly, itwill tum off or reduce the output power, reduce the charging speed and ensure satety. Please check whether the equipment is used improperly.
- Please do not put the product in water, fire medium high temperature environment (more than 45 degrees) and low temperature environment (less than- 20 degrees), do not let children play, especially do not let children contact accessories.
- Please use a dry soft cloth to clean the surface. Do not use chemicals, soapor detergent
- Please do not disassemble the machine by yourselt. Improper use or improper placement of the productby the usermay reduce the service lite or damage the product. Iherefore, the responsibility does not belong to the warranty responsibility or the manutacturers responsibility. Please understand.
- Mobile power has conversion efticiency, so the battery capacity of moble power is not equal to the rechargeable capacity.
- Please charge your power regularly (at leastevery5 months is recommended) to maintain ts long service lite.
- Improper use of the product may easily result in the product itself or endanger the safety of personal and property.
- case of any personal and property damage caused by consumersS Improper use or warning in violation of the product instructions, the company will bear all consequences, and thecompanywll not bear any legal liability.
- Non professionals are strictly prohibited to decompose this product.
- Avoid using clactrical applianccs or loads that oxcccd the output currcnt of the product (the Circuit will bC protectcd, no output).
- Avoid strong physical effects, includingknocking, throwing, trampling, squeezing, etc.
Statement on Toxic and Hazardous Substances in Electronic Information Products
This form is compiled in accordance with SJ/T 11364. O:tindicates that the
content of the toxic and hamtul substance in all homogeneous materials of the
component is below the limit specified in GB/T 26572 standard. X The content
of toxic and harmful substances in at least one homogeneous material of this
part exceeds the limit stipulated in GB/T26572 standarcd. The product complies
with EU ROHS 2.0 directive (2011/65/EU) The 5-year icon refers to the
“effective life of environmental protection”, not the product quality
assurance period. Electronic products all contain toxic and harmful substances
such as lead, mercury and cadmium. Oncc thcy arc ovcruscd, toxic and harmful
substances may lcakor mutate, cauSe pollution to the environ ment, or cause
serious damage to people and propety. The term of ‘environmental protection
use” means that all electronic products will be required to use within this
effective period. We will no longer be responsible for the quality of the
products due to the safety risks that arise after the sate use period. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following tvo conditions: (1) this device may not cause harmfulinterference,
and (2) this device must accept any interterence received, including
interterence that may cause undesired operation. Any changes or modifications
not expressly approved by the party responsible for Compllance COuld void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmtul
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interterencc will not
oCCur in a particular installation. I this equipment does cause harmful
interterence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorientor relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
The device has been evaluated to meet general RF exposure requirement. The device can be LIsed in portable expOSure ConditiOn withOut restriction.
It is hereby declared that PPCXW10-C, a product model of Shenzhen Times Innovation Technology Co., Ltd., complies with the provisions of Directive 2014/30/EU, 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
This equipment complies with the provisions ot Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not bc trcatcd as rcgular domcstic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
Warning: lease follow the above safety instructions otherwise it will cause fire, electric shock,damage or other damage.
Manufacturer: Shenzhen Times Innovation Technology Co., Ltd. Add:5th
Floor, BuildingB, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou
Community, Bantian Street, Longgang District, ShenzhenExecutive
Standard: GB/T 35590-2017
Hotline: +86-4000-712-711
Website: www.baseus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>