Lenovo MT-2420 Intelligence Devices User Manual

Intelligence Devices
User Manual

MT-2420
Model S

OVERVIEW

Hanshow Self-checkout Kiosk is a compact self-service solution applicable to various retail stores such as supermarkets, convenience stores, restaurants, etc., offering consumers a more convenient and interactive shopping experience.
Flexible Installation
It is stylish, delicate, and space-efficient. With its size and different types of accessories, you can install the kiosk almost anywhere you want, such as wall-mounted, tabletop, or stand type installation, etc.

Applicable Scenarios:

FEATURES

• Stylish, space-efficient, and ergonomic
• 24″ FHD capacitive touchscreen display
• Support 10-point multi-touch
• Embedded with 58mm & 80mm receipt printer with auto cutter
• Advanced 1800 Scanner. Support reading standard barcodes and on-screen QR codes.
• Optional structured camera module (HS-MT2402 is built-in). Support biological motion detection and face recognition.
• Plentiful integrated peripheral options. Such as POS, lamp posts, and weighing appliances that can accommodate dynamic retail scenarios and environments.
• Support cashless payment. Providing customers with a faster and smoother payment experience. (Must be applied with software and operating system)

FUNCTIONS

• Must lie applied with software and operating system.

SPECIFICATIONS

scale with RS232
Card Reader| YES, connect to card reader with USB
Tower Light| Three-color tower light (yellow\ red \green)
POS| YES, connect to POS with USB
Other| Adapter| Input: AC 110V-240V
Average Power Dissipation| 30W
Operating Temperature|   0° C ∼ 35° C
Storage Temperature|   -20° C ∼ 60° C
Dimensions| (HeightWidthDepth) 806* 370″105mm
Power Switch| YES
Installation| Tabletop, wall-mounted, pedestal mounted (Optional), floor stand type
(Optional)
WLAN| Wi-Fi 802.11 b/g/n,

COMPONENTS

Front side of kiosk

Side of kiosk

The back side of the kiosk

ATTENTIONS

• To avoid electric shock, do not disassemble the case arbitrarily. Maintenance shall be performed only by qualified maintenance personnel.
• In order to reduce the risk of fire or electric shock, do not let the equipment be exposed to rain or dampness.
• The equipment must be well-grounded, and the socket shall be installed near the equipment and accessible; The device must be operated at a power input voltage range of 110 to 240 V AC, SO to 60 Hz.
• During the installation, an easy-to-use power cut device should be configured in the fixed wiring. If the equipment breaks down during operation, it can be used to cut off the power supply of the equipment.
• Please use approved power curd (3-wire power cord), device interface, and plug with a connection point, and all should comply with the safety regulations of the country in which you are located.
• Please use specific rating (voltage, current) power cord (3-wire power curd), device interface, and plug.If you have any questions, please consult professional technicians.
• Labeling requirements. This device complies with part IS of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
• Information to the user.
  The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.

ATTENTIONS

Information to the user.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part IS of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
FCC RF Exposure compliance
The radiated output power of the antennas connected to MT-2420 MODEL S is far below the FCC radio frequency exposure limits. Nevertheless, it shall be used in such a manner that the potential for human contact during normal operation is minimized as follows: CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm (8 inches) must be maintained between the antennas connected to MT-2420 MODELS and all persons.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>