WILTEC 51778 Machine Vce 2 Axis 100mm Cross Milling Table Workbench Drilling User Manual

: June 5, 2024
: wiltec

Table of Contents

Introduction
Safety notes
Technical data
Exploded view and parts list
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

51778 Machine Vce 2 Axis 100mm Cross Milling Table Workbench Drilling
User Manual WILTEC 51778 Machine Vce 2 Axis 100mm Cross Milling Table
Workbench Drilling Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using it for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Even though the WilTec Wildanger Technik GmbH has undergone the biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing from you.

Send an e-mail to : service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via: https://www.wiltec.de/docsearch

Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany

Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany

To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or place your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler

E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15

Introduction

Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content.
Keep these operation instructions safe.

Safety notes

Check the device prior to each operation regarding its completeness and function.
Never use a broken or inoperative device. The device needs to be checked by a qualified specialist beforehand.
Always be mindful when carrying out work and be aware and careful of what you are doing.
Do not use excessive force.
Always keep the vice clean.
Do not overburden the device.
Keep children and unauthorized people away from the working area.
Do not wear loose clothing or jewelry.
Tie long hair together or wear a hairnet.
Wear adequate protective gear when working (protective glasses, gloves, safety shoes, etc.).
Place the vice on an even, solid, dry, and sturdy work surface.
Ensure that the working area is well illuminated.
Make sure all screws and nuts are tightened.
Ensure that the workpiece is placed centered and is tightened securely.
Do not use the vice to compress objects, as some items might be catapulted out (e.g., springs).
Make sure that the clamping jaws are clean to avoid any damage to the workpiece. Use cloths on easily damageable pieces as protection.
Do not alter the vice in any way.
Do not expose the vice to rain.
Only have the vice repaired by qualified specialists.
Do not work if you are tired or under the influence of alcohol, drugs, or other medical substances.

Technical data

Item number	51778	Sion	61094	61095	61096
Jaw width (mm)	loo	75	125	15o	200
Max. span width (mm)	loo	75	125	15o	200
Span depth (mm)	37	37	42	42	45
Weight (kg) Size (mm)	8.	5	11	16.	27
330X325X135	295X290X120	370x365x138	400X375X160	450X450X165

Exploded view and parts list

![WILTEC 51778 Machine Vce 2 Axis 100mm Cross Milling Table Workbench Drilling

figure 1](https://manuals.plus/wp-content/uploads/2022/06/WILTEC-51778 -Machine-Vce-2-Axis-100mm-Cross-Milling-Table-Workbench-Drilling-figure-1.jpg)

N2
1| Name| Qty.| N2| Name| Qty.
---|---|---|---|---|---
Crank| 2| 14| Guide rail| 1
2
3
4| Nut| 2| 15| Screw| 6
Spacer| 1| 16| Nut| 6
Screw| 3| 17| Slide rail| 1
co co| Fitting| 1| 18
19| Middle base| 1
Screw| 4| Screw| 4
7| Spring washer| 4| 20| Upper base| 1
8| Spindle| 1| 21| Screw| 1
9| Base plate| 1| 22| Nut| 1
10
ii| Spacer| 1| 23
24| Clamping jaw| 2
Fitting| 1| Slide| 1
12| Spindle| 1| 25| Wing nut| 2
13| Nut| 1| | |

Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.

© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de