Skullcandy S2IVW-N912 Indy Evo True Wireless In Ear Earbuds Instructions

S2IVW-N912 Indy Evo True Wireless In-Ear Earbuds
Instructions

DO THIS FIRST TO PAIR:

1. Remove earbuds from the package, place them in the charging case, and make sure both earbud LEDs turn red.

2. Remove earbuds from the charging case. This will automatically put them in pairing mode.
   (Note: only the left bud will flash red and blue.)

3. Open your list of available Bluetooth devices and select “Indy Evo.” Earbud LEDs will turn blue when connected. Be sure to select “Pair” or “OK” when you see the Bluetooth pairing request.

EASY CONTROLS

Auto On – Remove buds from the case
Power On – Touch and hold 4 seconds | Auto On – Remove buds from the case
Power On – Touch and hold 4 seconds
Auto-Off – Put buds in case
Power Off – Touch and hold 6 seconds | Auto-Off – Put buds in case
Power Off – Touch and hold 6 seconds
TrackBack – Touch and hold 2 seconds | Track Forward – Touch and hold 2 seconds
Volume Down – Tap once | Volume Up – Tap once
Play/Pause – Tap twice | Play/Pause – Tap twice
Answer/End Calls – Tap twice | Answer/End Calls – Tap twice
Activate Assistant – Tap 3 times | Activate Assistant – Tap 3 times
EQ Mode – Tap twice and hold 2 seconds | EQ Mode – Tap twice and hold 2 seconds
Ambient Mode – Tap once and hold 2 seconds | Ambient Mode – Tap once and hold 2 seconds
Clear/Reset – From off, touch and hold both buds for 10 seconds

For additional features, download the Skullcandy app.

PAIRING HELP:

If you ever have an issue pairing your earbuds, follow these steps:

1. Unpair the buds from your phone or device.
2. Touch and hold the main button on each bud for 6 seconds to manually turn them both off.
3. Touch and hold the main button on each bud for 10 seconds to completely reset them (this will power them on and off again).
4. Place buds back in the case until both LEDs show red, and then remove them from the case. Both buds will automatically power on and the LEDs will flash blue while they sync to each other.
5. A tone will indicate when the buds have synced. The LED on the left bud will flash blue and red and a voice will say “pairing” when the buds start connecting to your phone or device.
6. Look for Indy Evo in your list of available Bluetooth devices. Make sure it only appears once and select it.
7. Select all “Pair” or “OK” prompts that will pop up on your screen.
8. Once successfully paired, a voice will say “connected” and you’ll see Indy Evo twice on your available or paired devices list.

Questions?
Skullcandy.com/support/IndyEvo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>